Multivariate variational mode decomposition and generalized composite multiscale permutation entropy for multichannel fault diagnosis of hoisting machinery system
Restricted accessResearch articleFirst published online May, 2024
Multivariate variational mode decomposition and generalized composite multiscale permutation entropy for multichannel fault diagnosis of hoisting machinery system
Due to the harsh working environment of hoisting machinery system, the fault information of the important components is significantly complex, which leads to the fault signals not being collected completely by using only single channel. To alleviate this problem, acoustic emission (AE) experiments are applied to collect multichannel AE signal of hoisting machinery system. Additionally, a new intelligent fault diagnosis method based on multivariate variational mode decomposition (MVMD) and generalized composite multiscale permutation entropy (GCMPE) is proposed to extract multichannel AE fault features and implement multichannel fault diagnosis of hoisting machinery system. Firstly, based on variational mode decomposition (VMD) and the idea of multichannel AE data processing, MVMD is proposed to process the original multichannel AE signals collected from hoisting machinery system, which can obtain adaptively several multichannel modal components containing discriminative information. Meanwhile, GCMPE is presented to extract the fault information of multichannel modal components obtained by MVMD, which can improve the feature extraction performance of the original multiscale permutation entropy. The experimental results demonstrate the effectiveness and superiority of the proposed method in multichannel fault diagnosis of hoisting machinery system compared with some traditional single-channel analysis and other multichannel analysis methods.
WangRDZayedTPanW, et al. A system boundary-based critical review on crane selection in building construction. Autom Constr2021; 123: 103520.
2.
CuongHMDongHQTrieuPV, et al. Adaptive fractional-order terminal sliding mode control of rubber-tired gantry cranes with uncertainties and unknown disturbances. Mech Syst Signal Process2021; 154: 107601.
3.
OuyangHMTianZYuLL, et al. Load swing rejection for double-pendulum tower cranes using energy-shaping-based control with actuator output limitation. ISA Trans2020; 101: 246–255.
4.
SunNFangYChenH, et al. Nonlinear antiswing control of offshore cranes with unknown parameters and persistent ship-induced perturbations: theoretical design and hardware experiments. IEEE Trans Ind Electron2018; 65(3): 2629–2641.
5.
MaGDuQ. Structural health evaluation of the prestressed concrete using advanced acoustic emission (AE) parameters. Constr Build Mater2020; 250: 118860.
6.
BhuiyanMYBaoJPoddarB, et al. Toward identifying crack-length-related resonances in acoustic emission waveforms for structural health monitoring applications. Struct Health Monit2018; 17(3): 577–585.
7.
LiYXuF. All-phase fast Fourier transform and multiple cross-correlation analysis based on Geiger iteration for acoustic emission sources localization in complex metallic structures. Struct Health Monit2021; 21(3): 14759217211027481.
8.
LiYXuF. Structural damage monitoring for metallic panels based on acoustic emission and adaptive improvement variational mode decomposition-wavelet packet transform. Struct Health Monit2021; 21(2): 14759217211008969.
9.
ChenRTangLHuX, et al. Fault diagnosis method of low-speed rolling bearing based on acoustic emission signal and subspace embedded feature distribution alignment. IEEE Trans Ind Inform2021; 17(8): 5402–5410.
10.
WangKHaoQZhangX, et al. Blind source extraction of acoustic emission signals for rail cracks based on ensemble empirical mode decomposition and constrained independent component analysis. Measurement2020; 157: 107653.
11.
WangLLiuZMiaoQ, et al. Complete ensemble local mean decomposition with adaptive noise and its application to fault diagnosis for rolling bearings. Mech Syst Signal Process2018; 106: 24–39.
12.
YangZXZhongJH. A hybrid EEMD-based SampEn and SVD for acoustic signal processing and fault diagnosis. Entropy2016; 18(4): 112.
13.
LiYJiaoSGaoX. A novel signal feature extraction technology based on empirical wavelet transform and reverse dispersion entropy. Defence Technology2021; 17(5): 1625–1635.
14.
YuJLiuH. Sparse coding shrinkage in intrinsic time-scale decomposition for weak fault feature extraction of bearings. IEEE Trans Instrum Meas2018; 67(7): 1579–1592.
15.
TraoreOIPanteraLFavretto-CristiniN, et al. Structure analysis and denoising using singular spectrum analysis: application to acoustic emission signals from nuclear safety experiments. Measurement2017; 104: 78–88.
16.
ShaoHLiWCaiB, et al. Dual-threshold attention-guided GAN and limited infrared thermal images for rotating machinery fault diagnosis under speed fluctuation. IEEE Trans Ind Inform2022; 19(9): 9933–9942.
17.
ChenMShaoHDouH, et al. Data augmentation and intelligent fault diagnosis of planetary gearbox using ILoFGAN under extremely limited samples. IEEE Trans Reliab2022; 72(3): 1029–1037.
18.
ChenXShaoHXiaoY, et al. Collaborative fault diagnosis of rotating machinery via dual adversarial guided unsupervised multi-domain adaptation network. Mech Syst Signal Process2023; 198: 110427.
19.
LvYYuanRSongG. Multivariate empirical mode decomposition and its application to fault diagnosis of rolling bearing. Mech Syst Signal Process2016; 81: 219–234.
20.
LangXZhengQXieL, et al. Direct multivariate intrinsic time-scale decomposition for oscillation monitoring. IEEE Trans Control Syst Technol2020; 28(6): 2608–2615.
21.
YanXLiuYXuY, et al. Multichannel fault diagnosis of wind turbine driving system using multivariate singular spectrum decomposition and improved Kolmogorov complexity. Renew Energy2021; 170: 724–748.
22.
WangXYangZYanX. Novel particle swarm optimization-based variational mode decomposition method for the fault diagnosis of complex rotating machinery. IEEE/ASME Trans Mechatron2018; 23(1): 68–79.
23.
MiaoYZhaoMYiY, et al. Application of sparsity-oriented VMD for gearbox fault diagnosis based on built-in encoder information. ISA Trans2020; 99: 496–504.
24.
LiHLiuTWuX, et al. An optimized VMD method and its applications in bearing fault diagnosis. Measurement2020; 166: 108185.
25.
LiJYaoXWangH, et al. Periodic impulses extraction based on improved adaptive VMD and sparse code shrinkage denoising and its application in rotating machinery fault diagnosis. Mech Syst Signal Process2019; 126: 568–589.
26.
TranMElsisiMLiuM. Effective feature selection with fuzzy entropy and similarity classifier for chatter vibration diagnosis. Measurement2021; 184: 109962.
27.
HuachunWJianZChunhuX, et al. Two-dimensional time series sample entropy algorithm: applications to rotor axis orbit feature identification. Mech Syst Signal Process2021; 147: 107123.
28.
WangDZhongJShenC, et al. Correlation dimension and approximate entropy for machine condition monitoring: revisited. Mech Syst Signal Process2021; 152: 107497.
29.
RongHJYangZXWongPK. Robust and noise-insensitive recursive maximum correntropy-based evolving fuzzy system. IEEE Trans Fuzzy Syst2020; 28(9): 2277–2284.
30.
SunYCaoYXieG, et al. Sound based fault diagnosis for rpms based on multi-scale fractional permutation entropy and two-scale algorithm. IEEE Trans Veh Technol2021; 70(1): 11184–11192.
31.
TrieuPVCuongHMDongHQ, et al. Adaptive fractional-order fast terminal sliding mode with fault-tolerant control for underactuated mechanical systems: application to tower cranes. Autom Constr2021: 123; 103533.
32.
XiaMLiTXuL, et al. Fault diagnosis for rotating machinery using multiple sensors and convolutional neural networks. IEEE/ASME Trans Mechatron2018; 23(1): 101–110.
33.
LiYXuF. Structural condition monitoring and identification of laser cladding metallic panels based on an acoustic emission signal feature optimization algorithm. Struct Health Monitor2021; 20(3): 1052–1073.
34.
RyanGMoscaAChangR, et al. At a glance: pixel approximate entropy as a measure of line chart complexity. IEEE Trans Vis Comput Graph2019; 25(1): 872–881.
35.
UdhayakumarRKKarmakarCPalaniswamiM. Understanding irregularity characteristics of short-term HRV signals using sample entropy profile. IEEE Trans Biomed Eng2018; 65(11): 2569–2579.
36.
LiYXuF. A novel acoustic emission sources localization and identification method in metallic plates based on stacked denoising autoencoders. IEEE Access2020; 8: 141123–141142.
37.
YanSShaoHMinZ, et al. FGDAE: a new machinery anomaly detection method towards complex operating conditions. Reliab Eng Syst Saf2023; 236: 109319.
38.
LiYXuF. Acoustic emission and moving window-improved kernel entropy component analysis for structural condition monitoring of hoisting machinery under various working conditions. Struct Health Monitor2021; 21(4): 1407–1431.
39.
HaiyangZJindongWLeeJ, et al. A compound interpolation envelope local mean decomposition and its application for fault diagnosis of reciprocating compressors. Mech Syst Signal Process2018; 110: 273–295.
40.
XuLChattertonSPennacchiP. Rolling element bearing diagnosis based on singular value decomposition and composite squared envelope spectrum. Mech Syst Signal Process2021; 148: 107174.
41.
ChengYWangZChenB, et al. An improved complementary ensemble empirical mode decomposition with adaptive noise and its application to rolling element bearing fault diagnosis. ISA Trans2019; 91: 218–234.
42.
LiJWangHWangX, et al. Rolling bearing fault diagnosis based on improved adaptive parameterless empirical wavelet transform and sparse denoising. Measurement2020; 155: 107392.
43.
GuoYZhouYZhangZ. Fault diagnosis of multi-channel data by the CNN with the multilinear principal component analysis. Measurement2021; 171: 108513.
44.
BaiRXuQMengZ, et al. Rolling bearing fault diagnosis based on multi-channel convolution neural network and multi-scale clipping fusion data augmentation. Measurement2021; 184: 109885.
45.
GaoDZhuYRenZ, et al. A novel weak fault diagnosis method for rolling bearings based on LSTM considering quasi-periodicity. Knowl-Based Syst2021; 231: 107413.
46.
ZhouFHanJYangX. Multivariate hierarchical multiscale fluctuation dispersion entropy: applications to fault diagnosis of rotating machinery. Appl Acoust2021; 182: 108271.
47.
ZhangWWangZLiX. Blockchain-based decentralized federated transfer learning methodology for collaborative machinery fault diagnosis. Reliab Eng Syst Saf2023; 229: 108885.
48.
ZhangSWangMYangF, et al. Manifold sparse auto-encoder for machine fault diagnosis, IEEE Sens J2020; 20(15): 8328–8335.
49.
LiuJLiQChenW, et al. A fast fault diagnosis method of the PEMFC system based on extreme learning machine and dempster-shafer evidence theory. IEEE Trans Transp Electrif2019; 5(1): 271–284.
50.
ShaoHJiangHZhangH, et al. Electric locomotive bearing fault diagnosis using a novel convolutional deep belief network. IEEE Trans Ind Electron2017; 65(3): 2727–2736.
51.
JanSULeeYDKooIS. A distributed sensor-fault detection and diagnosis framework using machine learning. Inform Sci2021; 547: 777–796.
52.
LiXXuYLiN, et al. Remaining useful life prediction with partial sensor malfunctions using deep adversarial networks. IEEE/CAA J Autom Sin2022; 10(1): 121–134.
