Wireless sensor networks have attracted attention as a possible solution for applications of periodic and continuous structural health monitoring. Ensuring synchronous data acquisition across wireless nodes in large networks of sensors spatially distributed on a structure is of critical importance for many methods of structural health monitoring, especially those based on analysis of vibration. In this article we present a novel Wireless Intelligent Sensor and Actuator Network (WISAN) addressing the issue of scalability for applications of structural health monitoring. We also present a novel time synchronization algorithm that can keep the synchronization error between any number of globally distributed sensors nodes less than ±23 μs. We show proof of stability for the time synchronization algorithm. We validate WISAN in laboratory experiments, testing the actual time synchronization between randomly selected sensors in a complex network. Finally, we validate WISAN in a field experiment by reconstructing mode shapes of a highway bridge.
Lynch, J.P. and Loh, K.J. ( 2006). A summary review of wireless sensors and sensor. Networks for structural health monitoring. The Shock and Vibration Digest, 38, 91-128.
2.
Straser, E.G. and Kiremidjian, A.S. (1998). A Modular, Wireless Damage Monitoring System for Structures. Technical Report 128, John A. Blume Earthquake Engineering Center, Stanford University, Stanford, CA.
3.
Lynch, J.P., Sundararajan, A., Law, K.H., Carryer, E., Farrar, C.R., Sohn, H., Allen, D.W., Nadler, B. and Wait, J.R. ( 2004). Design and performance validation of a wireless sensing unit for structural health monitoring applications. Structural Engineering and Mechanics, 17, 393-408.
4.
Kottapalli, V.A. , Kiremidjian, A.S., Lynch, J.P., Carryer, E., Kenny, T.W., Law, K.H. and Lei, Y. (2003). Two-tiered wireless sensor network architecture for structural health monitoring. In: Proceedings of the SPIE: Smart Structures and Materials, San Diego, CA, 3-6 March, Vol. 5057, pp. 8-19.
5.
Shinozuka, M. (2003). Homeland security and safety . In: Proceedings of the International Conference on Structural Health Monitoring and Intelligent Infrastructure, Tokyo, Japan, 13-15 November, Vol. 2, pp. 1139-1145.
6.
Park, C., Chou, P.H. and Shinozuka, M. ( 2005). DuraNode: Wireless networked sensor for structural health monitoring. In: Proceedings of the 4th IEEE International Conference on Sensors, Irvine, CA.
7.
Zhao, F. and Guibas, L. ( 2004). Wireless Sensor Networks: An Information Processing Approach , San Francisco, CA: Morgan Kaufman .
8.
Kling, R.M. ( 2003). Intel Mote: An enhanced sensor network node. In: Proceedings of the International Workshop on Advanced Sensors, Structural Health Monitoring and Smart Structures , Tokyo, Japan, pp. 12-17.
9.
Kumagai, J. ( 2004). Life of birds - wireless sensor network for bird study . IEEE Spectrum, 41, 30-37.
10.
Hill, J.L. ( 2003). System architecture for wireless sensor networks. PhD Thesis, University of California, Berkeley.
11.
Maurer, W. ( 2003). The Scientist and Engineer’s Guide to Smart Dust and TinyOS Programming, Livermore, CA: DSPLab Press.
12.
Glaser, S.D. ( 2004). Some real-world applications of wireless sensor nodes . In: Proceedings of the SPIE: Smart Structures and Materials: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, San Diego, CA, 15-18 March, Vol. 5391, pp. 344-355.
13.
Tanner, N.A. , Wait, J.R., Farrar, C.R. and Sohn, H. (2003). Structural health monitoring using modular wireless sensors. Journal of Intelligent Material Systems and Structures, 14, 43-56.
14.
Grosso, A.D., Inaudi, D. and Pardi, L.2002. Overview of European activities in the health monitoring of bridges. In: First International Conference on Bridge Maintenance, Safety and Management, IABMAS'02', CIMNE, Barcelona.
15.
Doebling, S.W. , Farrar, C.R. and Prime, M.B. (1998). A summary review of vibration-based damage identification methods. Shock and Vibration Digest, 30, 91-105.
16.
Cunha, A. and Caetano, E. ( 2005). From input-output to output-only modal Identification of civil engineering structures. In: Proceedings of the first International Operational Modal Analysis Conference, Copenhagen, Denmark.
17.
Farrar, C.R. and Jauregui, D.A. (1998). Comparative study of damage identification algorithms applied to a bridge. Smart Materials and Structures, 7, 704-719.
18.
Brincker, R., Zhang, L. and Andersen, P. ( 2001). Modal identification from ambient responses using frequency domain decomposition. In: Proceedings of 18th International Modal Analysis Conference, Kissimmee, FL, USA.
19.
Sazonov, E. and Klinkhachorn, P. (2005). Optimal spatial sampling interval for damage detection by curvature or strain energy mode shapes. Journal of Sound and Vibration, 285, 783-801.
20.
Pandey, A.K. , Biswas, M. and Samman, M.M. (1991). Damage detection from changes in curvature mode shapes. Journal of Sound and Vibration , 145, 321-332.
21.
Shi, Z.Y. and Law, S.S. (1998). Structural damage localization from modal strain energy change. Journal of Sound and Vibration , 218, 825-844.
22.
Krishnamurthy, V., Fowler, K. and Sazonov, E. (2008). The effect of time synchronization of wireless sensors on the modal analysis of structures. Smart Materials and Structures, 17, 055018.
23.
Sivrikaya, F. and Yener, B. (2004). Time synchronization in sensor networks: A survey. IEEE Network, 18, 45-50.
24.
Elson, J., Girod, L. and Estrin, D. ( 2002). Fine-grained network time synchronization using reference broadcasts. In: Proceedings of 5th Symposium on Operating Systems Design and Implementation, Boston, MA , USA.
25.
Ganeriwal, S. , Kumar, R. and Srivastava, M.B. (2003). Timing-sync protocol for sensor networks. In: Proceedings of the First International Conference on Embedded Networked Sensor Systems, Los Angeles, California, USA, pp. 138-149.
26.
Sichitiu, M.L. and Veerarittiphan , C.2003, Simple, accurate time synchronization for wireless sensor networks. In: Proceedings of the IEEE Wireless Communications and Networking Conference (WCNC 2003), New Orleans, Vol. 2, pp. 1266-1273.
27.
Greunen, J.V. and Rabaey, J.2003. Lightweight time synchronization for sensor networks. In: Proceedings of 2nd ACM lnternational Conference on Wireless Sensor Networks and Applications, San Diego, CA, USA, pp. 11-19.
28.
Wang, Y., Lynch, J.P. and Law, K.H. ( 2007). A wireless structural health monitoring system with multi-threaded sensing devices: design and validation. Structure and Infrastructure Engineering, 3, 103-120.
29.
Lynch, J.P., Law, K.H., Kiremidjian, A.S., Kenny, T.W., Carryer, E. and Partridge, A. ( 2001). The design of a wireless sensing unit for structural health monitoring. In: Proceedings of the 3rd International Workshop on Structural Health Monitoring, Stanford, CA , 12-14 September.
30.
Mitchell, K., Rao, V.S. and Pottinger, H.J. ( 2002). Lessons learned about wireless technologies for data acquisition. In: Proceedings of the SPIE: Smart Structures and Materials 2002: Smart Electronics, MEMS, and Nanotechnology, San Diego, CA, 18-21 March, Vol. 4700, pp. 331-341.
31.
Chung, H.-C., Enomoto, T., Shinozuka, M., Chou, P., Park, C., Yokoi, I. and Morishita, S. ( 2004). Real-time visualization of structural response with wireless MEMS sensors. In: Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, BC, Canada, 2-6 August.
32.
Farrar, C.R., Allen, D.W., Ball, S., Masquelier, M.P. and Park, G. ( 2005). Coupling sensing hardware with data interrogation software for structural health monitoring. In: Proceedings of the 6th International Symposium on Dynamic Problems of Mechanics (DINAME) , Ouro Preto, Brazil, 29 February - 4 March.
33.
Krishnamurthy, V. and Sazonov, E.S. (2008). Reservation-based protocol for monitoring applications using IEEE802.15.4 sensor networks. International Journal of Sensor Networks, 4(3), 155-171.
34.
Texas Instruments. Available at: www.ti.com (accessed October 2008).
35.
Chipcon Inc. Available at: www.chipcon.com (accessed October 2008).
36.
Sazonov, E., Jha, R., Janoyan, K., Krishnamurthy, V., Fuchs, M. and Cross, K. ( 2006). Wireless intelligent sensor and actuator network (WISAN): A scalable ultra-low-power platform for structural health monitoring. In: Proceedings of SPIE’s Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, Vol. 6177, pp. 234-244.
37.
LIS3L02AQ 3 axis Linear Accelerometer, ST Microelectronics Inc. Available at: www.st.com (accessed April 2006).
38.
IEEE Standard for Information technology ( 2006). Telecommunications and information exchange between systems-Local and metropolitan area networks-Specific requirements, Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) specifications for Low Rate Wireless Personal Area Networks (LR-WPANs), IEEE 802.15.4-2006.
39.
Allan, D.W. , Ashby, N. and Hodge, C.C. (1997). The science of timekeeping . Hewlett Packard Application Note1289.
40.
CS20 8 MHz Crystal, Citizen. Available at: http://www.citizencrystal.com (accessed April 2006).
41.
ARTeMIS - Operational Modal Analysis Software Provided by Structural Vibration Solutions A/S. Available at: http://www.svibs.com/ (accessed October 2008).
