A single-cylinder full-metal engine with a real combustion chamber geometry was used to investigate particulate number emissions resulting from transient engine operation. The formation of particulate number emissions depends on mixture formation influenced by the in-cylinder flow and injection, and the formation of fuel films on the in-cylinder walls. For the investigation of this multi-parameter process, simultaneous endoscopic PIV and combustion visualization were applied. Hence, the measurement techniques allowed the investigation of in-cylinder flow, flame propagation, and soot formation. The test rig was modified to apply a generic load step and a realistic tip-in with Miller cycle. The reproducibility of the engine parameters during the transient allowed statistical analysis and the comparison between steady-state operating points. Cause-and-effect chains concerning the formation of soot are concluded by correlation analysis of parameters extracted from the flow field, the flame propagation and the soot luminosity.
European Commission Regulation No 459/2012. J Eur Union2012: 16–24.
2.
European Commission Regulation 2017/1151. J Eur Union2017: 1–643.
3.
BoulouchosKKirchenP.A phenomenological mean value soot model for transient engine operation. MTZ Worldw2008; 69: 58–65.
4.
PeckhamMSFinchACampbellBPricePDaviesMT. Study of particle number emissions from a turbocharged gasoline direct injection (GDI) engine including data from a fast-response particle size spectrometer. SAE technical paper 2011-01-1224, 2011.
5.
PeckhamMSFinchACampbellB. Analysis of transient HC, CO, NOx and CO2 emissions from a GDI engine using fast response gas analyzers. SAE technical paper 2011-01-1227, 2011.
6.
SabathilDKoenigsteinASchaffnerPFritzscheJDoehlerA. The influence of DISI engine operating parameters on particle number emissions. SAE technical paper 2011-01-0143, 2011.
7.
HadlerJLensch-FranzenCGohlMMinkT.Einflussfaktoren auf die Partikelentstehung unter Realfahrbedingungen. MTZ Motortech Z2016; 77: 52–61.
8.
DrakeMCFanslerTDSolomonASSzekelyJr GA. Piston fuel films as a source of smoke and hydrocarbon emissions from a wall-controlled spark-ignited direct-injection engine. SAE technical paper 2003-01-0547, 2003.
9.
KettererJEChengWK.On the nature of particulate emissions from DISI engines at cold-fast-idle. SAE Int J Engines2014; 7: 986–994.
10.
StevensESteeperR.Piston wetting in an optical DISI engine: fuel films, pool fires, and soot generation. SAE technical paper 2001-01-1203, 2001.
11.
DagefördeHKubachHKochTSpicherU.Innermotorische Ursachen für Partikelemissionen bei Ottomotoren mit Direkteinspritzung. In: BargendeMReussH-CWiedemannJ (eds) 14. Internationales stuttgarter symposium. Wiesbaden: Springer Fachmedien Wiesbaden, 2014, pp.435–459.
12.
BodeJSchorrJKrügerCDreizlerABöhmB.Influence of three-dimensional in-cylinder flows on cycle-to-cycle variations in a fired stratified DISI engine measured by time-resolved dual-plane PIV. Proc Combust Inst2017; 36(3): 3477–3485.
13.
StiehlRSchorrJKrügerCDreizlerABöhmB.In-cylinder flow and fuel spray interactions in a stratified spray-guided gasoline engine investigated by high-speed laser imaging techniques. Flow Turbul Combust2013; 91: 431–450.
14.
PetersonBReussDLSickV.On the ignition and flame development in a spray-guided direct-injection spark-ignition engine. Combust Flame2014; 161(1): 240–255.
15.
PetersonBBaumEBöhmBDreizlerA.Early flame propagation in a spark-ignition engine measured with quasi 4D-diagnostics. Proc Combust Inst2015; 35(3): 3829–3837.
16.
BaumEPetersonBBöhmBDreizlerA.On the validation of LES applied to internal combustion engine flows: part 1: comprehensive experimental database. Flow Turbul Combust2014; 92(1–2): 269–297.
17.
NicolletFKrügerCSchorrJNicoudEColinOAngelbergerC, et al. A PIV-guided large-eddy simulation of in-cylinder flows. Oil Gas Sci Technol Rev IFP Energies Nouv2017; 72(5): 28.
18.
SteeperRRStevensEJ. Characterization of combustion, piston temperatures, fuel sprays, and fuel-air mixing in a DISI optical engine. SAE technical paper 2000-01-2900, 2000.
19.
KashdanJThirouardB.Optical engines as representative tools in the development of new combustion engine concepts. Oil Gas Sci Technol Rev IFP Energies Nouv2011; 66(5): 759–777.
20.
DischCPfeilJKubachHKochTSpicherUThieleO.Experimental investigations of a DISI engine in transient operation with regard to particle and gaseous engine-out emissions. SAE Int J Engines2016; 9(1): 262–278.
21.
GoschützMSchulzCKaiserSA.Endoscopic imaging of early flame propagation in a near-production engine. SAE Int J Engines2014; 7: 351–365.
22.
SchueckCKochTSamenfinkWSchünemannETafelSTowaeO.Optical investigations of soot formation mechanisms and possible countermeasures on a turbocharged port fuel injection SI engine. SAE Int J Engines2016; 9: 2010–2021.
23.
DierksheideUMeyerPHovestadtTHentschelW.Endoscopic 2D particle image velocimetry (PIV) flow field measurements in IC engines. Exp Fluids2002; 33: 794–800.
24.
FachCRödelNSchorrJKrügerCDreizlerABöhmB.Multi-parameter imaging of in-cylinder processes during transient engine operation for the investigation of soot formation. Int J Engine Res2021; 146808742110199.
25.
MerolaSSTornatoreCMarchittoLValentinoGCorcioneFE.Experimental investigations of butanol-gasoline blends effects on the combustion process in a SI engine. Int J Energy Environ Eng2012; 3: 6.
AdrianRJ.Particle-imaging techniques for experimental fluid mechanics. Annu Rev Fluid Mech1991; 23(1): 261–304.
28.
TsaiR.A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses. IEEE J Robot Automat1987; 3(4): 323–344.
29.
WillertCE.Assessment of camera models for use in planar velocimetry calibration. Exp Fluids2006; 41: 135–143.
30.
Mounaïm-RousselleCLandryLHalterFFoucherF.Experimental characteristics of turbulent premixed flame in a boosted Spark-Ignition engine. Proc Combust Inst2013; 34(2): 2941–2949.
31.
SchiffmannPReussDLSickV.Empirical investigation of spark-ignited flame-initiation cycle-to-cycle variability in a homogeneous charge reciprocating engine. Int J Engine Res2018; 19(5): 491–508.
32.
DabovKFoiAKatkovnikVEgiazarianK.Image restoration by sparse 3D transform-domain collaborative filtering. In: Image processing: Algorithms and systems VI (Vol. 6812, pp. 62–73). SPIE.
33.
StiehlRBodeJSchorrJKrugerCDreizlerABohmB. Influence of intake geometry variations on in-cylinder flow and flow–spray interactions in a stratified direct-injection spark-ignition engine captured by time-resolved particle image velocimetry. Int J Engine Res2016; 17(9): 983–997.
