Restricted accessResearch articleFirst published online 2026
Analysis and wavelet transform of vapor capillary dynamics during laser beam welding of aluminum gravity die-cast parts using in situ synchrotron diagnostics
In this study, laser beam welding (LBW) of gravity die-cast components made from the aluminum casting alloy EN AC-AlSi7Mg0.3 is investigated. The experiments are carried out using in situ X-ray observation with synchrotron radiation at the Deutsches Elektronen-Synchrotron (DESY), PETRA III beamline P07 EH4 in Hamburg, Germany. Phase-contrast videography is employed to investigate the keyhole dynamics in the LBW process, and the resulting weld pool ejections are visualized. In this investigation, the wavelet transform is introduced for time-resolved frequency analysis of keyhole dynamics in the welding process. First, the statistical fundamentals of the wavelet transform are presented based on the current state of the art. In preliminary studies, locally varying weldability is quantified using the position-dependent empirical probability of melt pool ejections. Melt pool ejections are classified as either stochastic or systematic. The subsequent wavelet analysis visualizes the frequency behavior of the maximum keyhole depth. This is followed by a position-dependent comparison of welds using frequency analyses based on the wavelet transform. This methodological study confirms the suitability of the wavelet transform for time-resolved frequency analysis of keyhole dynamics in LBW.
DIN EN ISO13919-2:2021-06. Electron and laser-beam welded joints – requirements and recommendations on quality levels for imperfections – part 2: aluminum, magnesium and their alloys and pure copper.
2.
LutzeP. Gasgehalt und Schweißeignung von Aluminium-Druckguss. PhD Thesis, University of Stuttgart, Germany, 1989.
3.
NörenbergK. Untersuchungen zur Schweißbarkeit von Aluminium-Druckguss. PhD Thesis, Technical University Carolo-Wilhelmina zu Braunschweig, Germany, 1991.
4.
WiesnerS. Wirtschaftliche Herstellung von gasarmen, schweißbarem Aluminium-Druckguss. PhD Thesis, University of Stuttgart, Germany, 2003.
5.
WinklerR. Porenbildung beim Laserstrahlschweißen von Aluminium-Druckguss. PhD Thesis, University of Stuttgart, Germany, 2004.
6.
GrefW. Laserstrahlschweißen von Aluminiumwerkstoffen mit der Fokusmatrixtechnik. PhD Thesis, Technical University Carolo-Wilhelmina zu Braunschweig, Germany, 2005.
7.
DittrichDJahnAStandfussJ, et al.Laser beam welding of atmosphere aluminum die-cast material using high frequency beam oscillation and brilliant beam sources. J Laser Appl2017; 29: 022425.
8.
TeichmannFMüllerSDilgerK. On the occurrence of weld bead porosity during laser vacuum welding of high pressure aluminum die castings. Procedia CIRP2018; 74: 438–441.
9.
FritzscheAHilgenbergKTeichmannF, et al.Improved degassing in laser beam welding of aluminum die casting by an electromagnetic field. J Mater Process Technol2018; 253: 51–56.
10.
SokolovMFranciosaPCeglarekD. Remote laser welding of die casting aluminum parts for automotive applications with beam oscillation and adjustable ring mode laser. In: Lasers in manufacturing conference (LiM 2021), Munich, Germany, 21–24 June 2021.
11.
KrischkeSTeichmannFHoffmannN, et al.Schweißeignung von Aluminium-Druckgusswerkstoffen. Schweißen Schneiden2023; 75: 674–681.
12.
BörnerSDittrichDSahmT, et al.X-ray analysis of capillary and melt pool dynamics using laser beam oscillation welding for aluminum die-casts. J Laser Appl2025; 37: 022019.
13.
TorrenceCCompoGP. A practical guide to wavelet analysis. Bull Am Meteorol Soc1998; 79: 61–78.
14.
RioulODuhamelP. Fast algorithms for discrete and continuous wavelet transforms. IEEE Trans Inf Theory1992; 38: 569–586.
15.
KatsavriasCPapadimitriouCHillarisA, et al.Application of wavelet methods in the investigation of geospace disturbances: a review and an evaluation of the approach for quantifying wavelet power. Atmosphere (Basel)2022; 13: 499.
16.
SinghAMaitiS. Selection of optimum wavelet in CWT analysis of geophysical downhole data. J Indian Geophys Union2017; 21: 153–166.
17.
MiXRenHOuyangZ, et al.The use of the Mexican Hat and the Morlet wavelets for detection of ecological patterns. Plant Ecol2004; 179: 1–19.
18.
ArtsLPAVan den BroekEL. The fast continuous wavelet transformation (fCWT) for real-time, high-quality, noise-resistant time-frequency analysis. Nat Comput Sci2022; 2: 47–58.
19.
RhifMAbbesAMartinezB, et al.An improved trend vegetation analysis for non-stationary NDVI time series based on wavelet transformation. Environ Sci Pollut Res Int2021; 28: 46603–46613.
20.
MallatS. A wavelet tour of signal processing. 3rd ed. London: Academic Press, 2009, p.2.
21.
Al BassamNRamachandranVEratt ParameswaranS. Wavelet theory and application in communication and signal processing. In: Wavelet Theory. London: IntechOpen, 2021, pp.45–62.
22.
SchrickerKSchmidtLFriedmannH, et al.Characterization of keyhole dynamics in laser welding of copper by means of high-speed synchrotron X-ray imaging. Procedia CIRP2022; 111: 501–506.
23.
WolffNHohlweckTVroomenU, et al.Development of an experimental setup to investigate influences on component distortion in gravity die casting and a first variation of temperature control strategy. Metals (Basel)2021; 11: 2028.
24.
SpurkCDietrichFHummelM, et al.In situ synchrotron investigations of beam diameter influence on vapor capillary formation during laser beam welding of copper alloy with a blue laser beam source. J Manuf Mater Process2024; 8: 47.
25.
HummelMSpurkCHeiderA, et al.Development workflow based on in situ synchrotron investigations to optimize laser processing of copper pins. J Laser Appl2024; 36: 042001.
26.
WangCYYehICHLiaoHYM. YOLOv9: learning what you want to learn using programmable gradient information. In: European conference on computer vision, Milan, Italy, 29 September–4 October 2024, pp.1–21. Cham: Springer Nature Switzerland.
27.
ŁuczakD. Mechanical vibrations analysis in direct drive using CWT with complex Morlet wavelet. Power Electron Drives2023; 8: 65–73.
28.
LiuWTangB. A hybrid time-frequency method based on improved Morlet wavelet and auto terms window. Expert Syst Appl2011; 38: 7575–7581.
29.
LatkaMTuralskaMKolodziejD, et al.Scaling properties of cerebral hemodynamics. In: LosaGAMerliniDNonnenmacherTF (eds) Fractals in biology and medicine. 4. Basel: Birkhäuser, 2005, pp.121–129.
30.
Gómez-LunaEMayorGAGuerraJP. Application of wavelet transform to obtain the frequency response of a transformer from transient signals – part II: practical assessment and validation. IEEE Trans Power Deliv2014; 29: 2231–2238.
31.
CohenMX. A better way to define and describe Morlet wavelets for time-frequency analysis. Neuroimage2019; 199: 81–86.
32.
MaraunDKurthsJ. Cross wavelet analysis: significance testing and pitfalls. Nonlinear Process Geophys2004; 11: 505–514.
