The effects of the spot size and beam wobbling on the mechanical properties and microstructure of the AA 6061 aluminum alloy during laser welding have been investigated. Changing the spot size from 0.6 to 0.3 mm reduced the required heat input for full penetration by 56% for a static laser beam and by 62% for a wobbling laser beam. Using a 0.3 mm diameter spot with beam wobbling reduced the severity of surface defects such as undercuts and excessive reinforcement. When the heat input and bead width were increased, laser beam wobbling increased the width of the equiaxed microstructure region in the weld metal. Grain refinement and the reduction in solute strengthening due to evaporation only had small effects on the weld metal strength.
ZhaoHWhiteDRDebroyT. Current issues and problems in laser welding of automotive aluminum alloys. Int Mater Rev1999; 44: 238–266.
3.
WuSCHuYNSongXP, et al.On the microstructural and mechanical characterization of hybrid Laser-welded Al-Zn-Mg-Cu alloys. J Mater Eng PerformApr. 2015; 24: 1540–1550.
4.
LiuCNorthwoodDOBholeSD. Tensile fracture behavior in CO2 laser beam welds of 7075-T6 aluminum alloy. Mater DesOct. 2004; 25: 573–577.
5.
CaoXWallaceWPoonC, et al.Research and progress in laser welding of wrought aluminum alloys. I. laser welding processes. Mater Manuf ProcessesJan. 2003; 18: 1–22.
6.
El-BatahgyAMKlimova-KorsmikOAkhmetovA, et al.High-power fiber laser welding of high-strength aa7075-t6 aluminum alloy welds for mechanical properties research. MaterialsDec. 2021; 14: 7498.
7.
NarsimhacharyDBatheRNPadmanabhamG, et al.Influence of temperature profile during laser welding of aluminum alloy 6061 T6 on microstructure and mechanical properties. Mater Manuf ProcessesAug. 2014; 29(8): 948–953. doi:https://doi.org/10.1080/10426914.2013.872258
8.
NarsimhacharyD. Effect of laser welding parameters on 6061 aluminium alloy. Odisha, India: National Institute of Technology Rourkela, 2014.
9.
VerhaegheGHiltonP. The effect of spot size and laser beam quality on welding performance when using high-power continuous wave solid-state lasers. In: International Congress on Applications of Lasers & Electro-Optics, 2005, p. 507, Laser Institute of America. doi:https://doi.org/10.2351/1.5060500.
10.
ShahLHKhodabakhshiFGerlichA. Effect of beam wobbling on laser welding of aluminum and magnesium alloy with nickel interlayer. J Manuf ProcessJan. 2019; 37: 212–219.
11.
RamiarisonHBarkaNPilcherC, et al.Weldability improvement by wobbling technique in high power density laser welding of two aluminum alloys: Al-5052 and Al-6061. J Laser ApplAug. 2021; 33: 032015.
12.
PangXDaiJChenSZhangM. Microstructure and mechanical properties of fiber laser welding of aluminum alloy with beam oscillation. Appl Sci (Switzerland)Dec. 2019; 9. doi:https://doi.org/10.3390/app9235096
13.
FetzerFSommerMWeberR, et al.Reduction of pores by means of laser beam oscillation during remote welding of AlMgSi. Opt Lasers EngSep. 2018; 108: 68–77.
14.
ZhaoJJiangPGengS, et al.Experimental and numerical study on the effect of increasing frequency on the morphology and microstructure of aluminum alloy in laser wobbling welding. J Mater Res TechnolNov. 2022; 21: 267–282.
15.
LiuTMuZHuR, et al.Sinusoidal oscillating laser welding of 7075 aluminum alloy: hydrodynamics, porosity formation and optimization. Int J Heat Mass TransfSep. 2019; 140: 346–358.
16.
YangHChenJHudaN, et al.Effect of beam wobbling on microstructure and hardness during laser welding of X70 pipeline steel. Sci Technol Weld JoiningJul. 2022; 27: 326–338.
17.
WangZOliveiraJPZengZ, et al.Laser beam oscillating welding of 5A06 aluminum alloys: microstructure, porosity and mechanical properties. Opt Laser TechnolApr. 2019; 111: 58–65.
18.
WangLGaoMZhangC, et al.Effect of beam oscillating pattern on weld characterization of laser welding of AA6061-T6 aluminum alloy. Mater DesOct. 2016; 108: 707–717.
19.
KimBH, et al.Effects of weaving laser on weld microstructure and crack for al 6k21-T4 alloy. J Mater Sci Technol2011; 27: 93–96.
20.
HagenlocherCSommerMFetzerF, et al.Optimization of the solidification conditions by means of beam oscillation during laser beam welding of aluminum. Mater DesDec. 2018; 160: 1178–1185.
21.
SchemppPRethmeierM. Understanding grain refinement in aluminium welding: henry Granjon prize 2015 winner category B: materials behaviour and weldability. Weld WorldNov. 2015; 59: 767–784.
22.
ArataYMatsudaFMukaeS. Title effect of weld solidification mode on tensile properties of aluminum weld metal. Citation Trans JWRI1973; 2: 184–190.
23.
BalasubramanianVRavisankarVReddyGM. Influences of pulsed current welding and post weld aging treatment on fatigue crack growth behaviour of AA7075 aluminium alloy joints. Int J FatigueMar. 2008; 30: 405–416.
24.
MatsudaFNakataKMiyanagaY. Title effect of electromagnetic stirring on weld solidification structure of aluminum alloys (report II) : investigation on GTA in DCSP weld metal of 8 mm thick plate. Citation Trans JWRI1978; 7: 181–193.
25.
ChenGWangBMaoS, et al.Research on the ‘∞’-shaped laser scanning welding process for aluminum alloy. Opt Laser TechnolJul. 2019; 115: 32–41.
26.
HanJShiYZhangG, et al.Minimizing defects and controlling the morphology of laser welded aluminum alloys using power modulation-based laser beam oscillation. J Manuf ProcessNov. 2022; 83: 49–59.
27.
MidawiARHSimhaCHMGesingMA, et al.Elastic-plastic property evaluation using a nearly flat instrumented indenter. Int J Solids StructJan. 2017; 104–105: 81–91.
28.
MidawiARHHudaNSimhaCHM, et al.Characterization of anisotropy of strength in API-X80 line pipe welds through instrumented indentation. Metallogr Microstruct AnalDec. 2020; 9: 884–894.
29.
XuJRongYHuangY, et al.Keyhole-induced porosity formation during laser welding. J Mater Process TechnolFeb. 2018; 252: 720–727.
XueBChangBWangS, et al.Humping formation and suppression in high-speed laser welding. MaterialsApr. 2022; 15: 2420.
32.
KouS. Welding metallurgy. John Wiley & Sons, 2020.
33.
AhmadGNRazaMSSinghNK, et al.Investigating the effect of process parameters on weld pool thermal history and mechanical properties of laser welded Inconel 625 and Duplex stainless steel 2205 dissimilar welds. Optik (Stuttg)Dec. 2021; 248: 168134. doi:https://doi.org/10.1016/j.ijleo.2021.168134
34.
KurzWFisherDJ. Fundamentals of solidification. 3rd ed. Aedermannsdorf, Switzerland: Trans Tech Publications, 1992.
35.
Standard Test Methods for Determining Average Grain Size, “ASTM E112-13(2021).” 2021.
36.
ThangarajuSHeilmaierMMurtyBS, et al.On the estimation of true Hall–petch constants and their role on the superposition law exponent in Al alloys. Adv Eng MaterOct. 2012; 14: 892–897.
37.
RyenØHolmedalBNijsO, et al.Strengthening mechanisms in solid solution aluminum alloys. Metall Mater Trans AJun. 2006; 37: 1999–2006.
38.
ZhongHRometschPAEstrinY. The influence of si and mg content on the microstructure, tensile ductility, and stretch formability of 6xxx alloys. Metall Mater Trans AAug. 2013; 44: 3970–3983.
39.
HuskinsELCaoBRameshKT. Strengthening mechanisms in an Al-Mg alloy. Mater Sci Eng: AMar. 2010; 527: 1292–1298.
40.
MidawiARHSimhaCHMGerlichAP. Novel techniques for estimating yield strength from loads measured using nearly-flat instrumented indenters. Mater Sci Eng: AOct. 2016; 675: 449–453.
41.
ASM International Handbook Committee, ASM Handbook, Volume 02 - Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, 10th ed. 1990.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
