Ni-Cr-B-Si hardface coating plays an important role in the mating components of nuclear power plants. Obtaining a crack-free coating with low dilution and optimum hardness is essential for reactor applications. In general, it is difficult to achieve this through conventional high heat input processes. In this work, Ni-Cr-B-Si hardface coating was successfully developed on 316LN stainless steel substrate by Cold Metal Transfer (CMT) welding process using metal-cored filler wire. Moreover, for comparative analysis, Ni-Cr-B-Si hardface coating was deposited using Plasma Transferred Arc (PTA) process. The obtained coatings were characterised for their microstructure, hardness, and wear behaviour. Results revealed higher hardness and lower specific wear rate of hardface coating made by the CMT process compared to the coating made by the PTA process. The superior behaviour of the CMT coating obtained may be due to its low dilution compared to the coating made using the PTA process. Confocal microscopy on the worn pins revealed abrasive and adhesive wear as a dominant mechanism in the CMT and PTA coatings, respectively. This study concluded that CMT could be used as an alternate potential process for depositing a crack-free hardface coating with superior wear behaviour.
BhaduriAKAlbertSKDasCR, et al.Hardfacing of austenitic stainless steel with nickel-base NiCr alloy. Int J Microstruct Mater Prop2011; 6: 40–53.
2.
KumarHRamakrishnanVAlbertSK, et al.High temperature wear and friction behaviour of 15Cr–15Ni–2Mo titanium-modified austenitic stainless steel in liquid sodium. Wear2010; 270: 1–4.
3.
CorchiaMDeloguPNenciF, et al.Microstructural aspects of wear-resistant stellite and colmonoy coatings by laser processing. Wear1987; 119: 137–152.
4.
BhaduriAKIndiraRAlbertSK, et al.Selection of hardfacing material for components of the Indian prototype fast breeder reactor. J Nucl Mater2004; 334: 109–114.
5.
KashaniHAmadehAGhasemiHM. Room and high temperature wear behaviors of nickel and cobalt base weld overlay coatings on hot forging dies. Wear2007; 262: 800–806.
6.
ChakrabortyGKumarNDasCR, et al.Study on microstructure and wear properties of different nickel base hardfacing alloys deposited on austenitic stainless steel. Surf Coat Technol2014; 244: 180–188.
7.
MishraRKKumarHHarmainGA, et al.Wear performance of Ni-Cr-B-Si hardface coatings fabricated by cold metal transfer welding. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science2022; 236: 1850–1860.
8.
PerssonDHEJacobsonSHogmarkS. Effect of temperature on friction and galling of laser processed norem 02 and stellite 21. Wear2003; 255: 498–503.
9.
BalasubramanianVVarahamoorthyRRamachandranCS, et al.Selection of welding process for hardfacing on carbon steels based on quantitative and qualitative factors. The International Journal of Advanced Manufacturing Technology2009; 40: 887–897.
10.
JagannadhamDDwivediDKGhoshPK. Weld surfacing of aluminium alloy by Ni—Cr base alloys. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications2009; 223: 117–129.
11.
BabuSBalasubramanianVMadhusudhan ReddyG, et al.Improving the ballistic immunity of armour steel weldments by plasma transferred arc (PTA) hardfacing. Materials & Design (1980-2015)2010; 31: 2664–2669.
12.
SavanthTSinghJGillJ. Laser power and scanning speed influence on the microstructure, hardness, and slurry erosion performance of Colmonoy-5 claddings. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications2020; 234: 947–961.
13.
SharmaVShahiAKumarS. Influence of different filler weld wire chemistries on metallurgical and mechanical behavior of ultrahigh strength steel welded joints. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications2019; 233: 2280–2300.
14.
FernándezECadenasMGonzálezR, et al.Wear behaviour of laser clad NiCrBSi coating. Wear2005; 259: 870–875.
15.
ÇelikON. Microstructure and wear properties of WC particle reinforced composite coating on Ti6Al4 V alloy produced by the plasma transferred arc method. Appl Surf Sci2013; 274: 334–340.
KesavanDKamarajM. The microstructure and high temperature wear performance of a nickel base hardfaced coating. Surf Coat Technol2010; 204: 4034–4043.
18.
RamachandranCSBalasubramanianVVarahamoorthyR, et al.Dry sliding wear behaviour of plasma transferred arc hardfaced colmonoy surface. Surf Eng2009; 25: 440–448.
19.
FernandesFLopesBCavaleiroA, et al.Effect of arc current on microstructure and wear characteristics of a Ni-based coating deposited by PTA on gray cast iron. Surf Coat Technol2011; 205: 4094–4106.
20.
OberländerBCLugscheiderE. Comparison of properties of coatings produced by laser cladding and conventional methods. Mater Sci Technol1992; 8: 657–665.
21.
BalaguruSMuraliVChellapandiP, et al.Effect of dilution on micro hardness of Ni–Cr–B–Si alloy hardfaced on austenitic stainless steel plate for sodium-cooled fast reactor applications. Nuclear Engineering and Technology2020; 52: 589–596.
22.
SelviSVishvaksenanARajasekarE. Cold metal transfer (CMT) technology - an overview. Defence Technology2018; 14: 28–44.
23.
RajeevGPKamarajMBakshiSR. Al-Si-Mn Alloy Coating on Aluminum Substrate using Cold Metal Transfer (CMT) Welding Technique. JOM2014; 66: 1061–1067.
24.
ZhangHTFengJCHeP, et al.The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel. Materials Science and Engineering: A2009; 499: 111–113.
25.
WangYChenXShenQ, et al.Effect of magnetic field on the microstructure and mechanical properties of inconel 625 superalloy fabricated by wire arc additive manufacturing. J Manuf Process2021; 64: 10–19.
26.
TangXZhangSCuiX, et al.Tribological and cavitation erosion behaviors of nickel-based and iron-based coatings deposited on AISI 304 stainless steel by cold metal transfer. Journal of Materials Research and Technology2020; 9: 6665–6681.
27.
VarghesePVetrivendanEDashMK, et al.Weld overlay coating of Inconel 617 M on type 316 L stainless steel by cold metal transfer process. Surf Coat Technol2019; 357: 1004–1013.
28.
OlaOTDoernFE. A study of cold metal transfer clads in nickel-base INCONEL 718 superalloy. Mater Des2014; 57: 51–59.
29.
TianYShenJHuS, et al.Effects of cold metal transfer mode on the reaction layer of wire and arc additive-manufactured Ti-6Al-4V/Al-6.25Cu dissimilar alloys. J Mater Sci Technol2021; 74: 35–45.
30.
KumarHRamakrishnanVAlbertSK, et al.Friction and wear behaviour of Ni-Cr-B hardface coating on 316LN stainless steel in liquid sodium at elevated temperature. J Nucl Mater2017; 495: 431–437.
31.
NaghizadehMMirzadehH. Effects of grain size on mechanical properties and work-hardening behavior of AISI 304 austenitic stainless steel. Steel Res Int2019; 90: 1900153.
32.
ChakrabortyGRaniRRamaseshanR, et al.High temperature tribological behavior of nickel base hardfacing alloys. Tribol Trans2021; 64: 658–666.
33.
DasCRAlbertSKBhaduriAK, et al.Effects of dilution on microstructure and wear behaviour of NiCr hardface deposits. Mater Sci Technol2007; 23: 771–779.
34.
HemmatiIOcelíkVCsachK, et al.Microstructure and phase formation in a rapidly solidified Laser-Deposited Ni-Cr-B-Si-C hardfacing alloy. Metallurgical and Materials Transactions A2014; 45: 878–892.
35.
KumarHAlbertSKSudhaC, et al.Hardfacing of a modified 9Cr–1Mo steel component using a Nickel-Base Alloy. Trans Indian Inst Met2011; 64: 339–343.
36.
HemmatiIOcelíkVde HossonJ. Toughening mechanism for Ni–Cr–B–Si–C laser deposited coatings. Materials Science and Engineering: A2013; 582: 305–315.
37.
KesavanDKamarajM. Influence of aging treatment on microstructure, wear and corrosion behavior of a nickel base hardfaced coating. Wear2011; 272: 7–17.
38.
GachotCRosenkranzAHsuSM, et al.A critical assessment of surface texturing for friction and wear improvement. Wear2017; 372–373: 21–41.
39.
RosenkranzACostaHLBaykaraMZ, et al.Synergetic effects of surface texturing and solid lubricants to tailor friction and wear – A review. Tribol Int2021; 155: 106792.
40.
AwasthiRLimayePKKumarS, et al.Wear characteristics of Ni-Based hardfacing alloy deposited on stainless steel substrate by Laser cladding. Metallurgical and Materials Transactions A2015; 46: 1237–1252.
41.
KatoK. Friction and wear of passive metals and coatings. In: LandoltDMischlerS (eds) Tribocorrosion of passive metals and coatings, 2011, 65–99. Cambridge, UK: Elsevier.
