Nickel-based thick hardface coatings are employed in nuclear power plants because of their superior wear and high-temperature resistance properties. Unfortunately, fabrication of a crack-free coating with less dilution is difficult using the conventional hardfacing techniques like Plasma Transferred Arc (PTA), Metal Inert Gas (MIG) etc. A sound coating having optimum hardness and better wear resistance property is essential for reactor applications. The current work aims to investigate the wear behaviour of Ni-Cr-B-Si hardface coating deposited on 316LN stainless steel, where metal-cored filler wire was used as a consumable in the Cold Metal Transfer (CMT) welding process. The hardface coating was characterized for its hardness and microstructure. Apart from that, pin-on-disc wear tests were performed using the extracted pin specimens from the hardfaced substrate. From this experiment, a micro-hardness of 531.24 ± 73.15 HV0.5 was measured across the coating cross-section. The microstructure analysis revealed the presence of precipitates like borides and carbides in the coating. Further, a specific wear rate of the order of 10−14 m3/Nm was found from the wear tests. Confocal microscopy on the worn surfaces of the pin specimens revealed, the surface damages mostly occurred by ploughing and fracture. The investigation ensures that CMT can be used for depositing crack-free, low dilution and wear-resistant hardface coatings in nuclear industries.
BhaduriAKAlbertSKDasCR, et al.
Hardfacing of austenitic stainless steel with nickel-base NiCr alloy. Int J Microstruct Mater Prop2011;
6: 40.
2.
CorchiaMDeloguPNenciF, et al.
Microstructural aspects of wear-resistant stellite and colmonoy coatings by laser processing. Wear1987;
119: 137–152.
3.
BhaduriAKIndiraRAlbertSK, et al.
Selection of hardfacing material for components of the Indian prototype fast breeder reactor. J Nucl Mater2004;
334: 109–114.
4.
KashaniHAmadehAGhasemiHM.Room and high temperature wear behaviors of nickel and cobalt base weld overlay coatings on hot forging dies. Wear2007;
262: 800–806.
5.
ChakrabortyGKumarNDasCR, et al.
Study on microstructure and wear properties of different nickel base hardfacing alloys deposited on austenitic stainless steel. Surf Coat Technol2014;
244: 180–188.
6.
PerssonDHJacobsonSHogmarkS.Effect of temperature on friction and galling of laser processed norem 02 and stellite 21. Wear2003;
255: 498–503.
7.
BalasubramanianVVarahamoorthyRRamachandranCS, et al.
Selection of welding process for hardfacing on carbon steels based on quantitative and qualitative factors. Int J Adv Manuf Technol2009;
40: 887–897.
XuGKutsunaMLiuZ, et al.
Characteristics of Ni-based coating layer formed by laser and plasma cladding processes. Mater Sci Eng A2006;
417: 63–72.
10.
MagoJBansalSGuptaD, et al. Influence of microwave heating on metallurgical and mechanical properties of Ni-40Cr 3 C 2 composite clads in the context of cavitation erosion resistance characteristics. Proc IMechE, Part C: J Mechanical Engineering Science2020; 235(7): 1258–1276. 095440622094034.
11.
BansalSMagoJGuptaD, et al.
Parametric optimization and analysis of cavitation erosion behavior of Ni-based + 10WC microwave processed composite clad using Taguchi approach. Surf Topogr2021;
9: 015011.
12.
BabuSBalasubramanianVMadhusudhan ReddyG, et al.
Improving the ballistic immunity of armour steel weldments by plasma transferred arc (PTA) hardfacing. Mater Des2010;
31: 2664–2669.
13.
BalasubramanianVLakshminarayananAKVarahamoorthyR, et al.
Understanding the parameters controlling plasma transferred arc hardfacing using response surface methodology. Mater Manuf Process2008;
23: 674–682.
14.
AmushahiMHAshrafizadehFShamanianM.Characterization of boride-rich hardfacing on carbon steel by arc spray and GMAW processes. Surf Coat Technol2010;
204: 2723–2728.
15.
FernándezECadenasMGonzálezR, et al.
Wear behaviour of laser clad NiCrBSi coating. Wear2005;
259: 870–875.
16.
ÇelikON.Microstructure and wear properties of WC particle reinforced composite coating on Ti6Al4V alloy produced by the plasma transferred arc method. Appl Surf Sci2013;
274: 334–340.
D’OliveiraASCMParedesRSCSantosRLC.Pulsed current plasma transferred arc hardfacing. J Mater Process Technol2006;
171: 167–174.
19.
BalaguruSMuraliVChellapandiP, et al.
Effect of dilution on micro hardness of Ni–Cr–B–Si alloy hardfaced on austenitic stainless steel plate for sodium-cooled fast reactor applications. Nucl Eng Technol2020;
52: 589–596.
20.
SelviSVishvaksenanARajasekarE.Cold metal transfer (CMT) technology – an overview. Def Technol2018;
14: 28–44.
21.
RajeevGPKamarajMBakshiSR.Al-Si-Mn alloy coating on aluminum substrate using cold metal transfer (CMT) welding technique. JOM2014;
66: 1061–1067.
22.
ZhangHTFengJCHeP, et al.
The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinc-coated steel. Mater Sci Eng A2009;
499: 111–113.
23.
WangYChenXShenQ, et al.
Effect of magnetic field on the microstructure and mechanical properties of inconel 625 superalloy fabricated by wire arc additive manufacturing. J Manuf Process2021;
64: 10–19.
24.
TangXZhangSCuiX, et al.
Tribological and cavitation erosion behaviors of nickel-based and iron-based coatings deposited on AISI 304 stainless steel by cold metal transfer. J Mater Res Technol2020;
9: 6665–6681.
25.
VarghesePVetrivendanEDashMK, et al.
Weld overlay coating of inconel 617 M on type 316 L stainless steel by cold metal transfer process. Surf Coat Technol2019;
357: 1004–1013.
26.
OlaOTDoernFE.A study of cold metal transfer clads in nickel-base INCONEL 718 superalloy. Mater Des2014;
57: 51–59.
27.
TianYShenJHuS, et al.
Effects of cold metal transfer mode on the reaction layer of wire and arc additive-manufactured Ti-6Al-4V/Al-6.25Cu dissimilar alloys. J Mater Sci Technol2021;
74: 35–45.
HemmatiIOcelíkVCsachK, et al.
Microstructure and phase formation in a rapidly solidified Laser-Deposited Ni-Cr-B-Si-C hardfacing alloy. Metall Mat Trans A2014;
45: 878–892.
30.
DasCRAlbertSKBhaduriAK, et al.
Effects of dilution on microstructure and wear behaviour of NiCr hardface deposits. Mater Sci Technol2007;
23: 771–779.
31.
KumarHAlbertSKSudhaC, et al.
Hardfacing of a modified 9Cr–1Mo steel component using a nickel-base alloy. Trans Indian Inst Met2011;
64: 339–343.
32.
HemmatiIOcelíkVDe HossonJTM.Toughening mechanism for Ni–Cr–B–Si–C laser deposited coatings. Mater Sci Eng A2013;
582: 305–315.
33.
KesavanDKamarajM.Influence of aging treatment on microstructure, wear and corrosion behavior of a nickel base hardfaced coating. Wear2011;
272: 7–17.
34.
KesavanDKamarajM.The microstructure and high temperature wear performance of a nickel base hardfaced coating. Surf Coat Technol2010;
204: 4034–4043.
35.
KumarHRamakrishnanVAlbertSK, et al.
Friction and wear behaviour of Ni-Cr-B hardface coating on 316LN stainless steel in liquid sodium at elevated temperature. J Nucl Mater2017;
495: 431–437.
36.
RosenkranzACostaHLBaykaraMZ, et al.
Synergetic effects of surface texturing and solid lubricants to tailor friction and wear – a review. Tribol Int2021;
155: 106792.
37.
GachotCRosenkranzAHsuSM, et al.
A critical assessment of surface texturing for friction and wear improvement. Wear2017;
372-373: 21–41.
38.
AwasthiRLimayePKKumarS, et al.
Wear characteristics of Ni-based hardfacing alloy deposited on stainless steel substrate by laser cladding. Metall Mat Trans A2015;
46: 1237–1252.
39.
KatoK. Friction and wear of passive metals and coatings. In: Landolt D and Mischler S (eds) Tribocorrosion of passive metals and coatings. Amsterdam: Elsevier, pp. 65–99.
