Engineering components operating at high temperature often fail due to the initiation and growth of cracks in the heat-affected zone adjacent to a weld. Understanding the effects of microstructural evolution in the heat-affected zone is important in order to predict and control the final properties of welded joints. This study presents a combined finite element method and phase field method for simulation of austenite grain growth in the heat-affected zone of a tempered martensite (P91) steel weld. The finite element method is used to determine the thermal history of the heat-affected zone during gas tungsten arc welding of a P91 steel plate. Then, the calculated thermal history is included in a phase field model to simulate grain growth at various positions in the heat-affected zone. The predicted mean grain size and grain distribution match well with experimental data for simulated welds from the literature. The work lays the foundation for optimising the process parameters in welding of P91 and other ferritic/martensitic steels in order to control the final heat-affected zone microstructure.
AbeF. Progress in creep-resistant steels for high efficiency coal-fired power plants. J Pressure Vessel Technol2016; 138: 040804–040804.
2.
GoldenBJLiDFGuoYNet al.Microscale deformation of a tempered martensite ferritic steel: modelling and experimental study of grain and sub-grain interactions. J Mech Phys Solid2016; 86: 42–52.
3.
O’HaraEMHarrisonNMPolomskiBKet al.Fatigue damage characterisation of MarBN steel for high temperature flexible operating conditions. Proc IMechE, Part L: J Materials: Design and Applications2017; 231: 23–37.
4.
LiDFGoldenBJO’DowdNP. Multiscale modelling of mechanical response in a martensitic steel: a micromechanical and length-scale-dependent framework for precipitate hardening. Acta Mater2014; 80: 445–456.
5.
YuXBabuSSTerasakiH. Correlation of precipitate stability to increased creep resistance of Cr-Mo steel welds. Acta Mater2013; 61: 2194–2206.
6.
LiMSunFWBarrettRAet al.Influence of material inhomogeneity on the mechanical response of a tempered martensite steel. Proc IMechE, Part L: J Materials: Design and Applications2017; 231: 14–22.
7.
WangYLiL. Microstructure evolution of fine-grained heat affected zone in type IV failure of P91 welds. Weld J2016; 95: 27–36.
8.
Abe F, Kern TU and Viswanathan R. Creep-resistant steels. New York and Washington DC: Elsevier, 2008, p.477.
9.
TomasPaulVSarojaSHariharanPet al.Identification of microstructural zones and thermal cycles in a weldment of modified 9Cr-1Mo steel. J Mater Sci2007; 42: 5700–5713.
10.
KinoshitaYYardleyVATsurekawaS. Relation between microstructures of martensite and prior austenite in 12 wt% Cr ferritic steel. J Mater Sci2011; 46: 4261–4269.
11.
KimuraKOhiNShimazuKet al.Effect of prior austenite grain size on high temperature creep properties of Cr-Mo-V rotor steel. Scripta Metall1987; 21: 19–22.
12.
MishraSDebRoyT. Measurements and Monte Carlo simulation of grain growth in the heat-affected zone of Ti–6Al–4 V welds. Acta Mater2004; 52: 1183–1192.
13.
ZhangZZWuCS. Monte Carlo simulation of grain growth in heat-affected zone of 12 wt.% Cr ferritic stainless steel hybrid welds. Comput Mater Sci2012; 65: 442–449.
14.
ChenSGuillemotGGandinCA. Three-dimensional cellular automaton-finite element modeling of solidification grain structures for arc-welding processes. Acta Mater2016; 115: 448–467.
YinHFelicelliSD. Dendrite growth simulation during solidification in the LENS process. Acta Mater2010; 58: 1455–1465.
17.
KamachaliRDSteinbachI. 3-D phase-field simulation of grain growth: topological analysis versus mean-field approximations. Acta Mater2012; 60: 2719–2728.
18.
FanDChenLQ. Computer simulation of grain growth using a continuum field model. Acta Mater1997; 45: 611–622.
19.
SteinbachI. Phase-field models in materials science. Modelling Simul Mater Sci Eng2009; 17: 073001–073001.
20.
ThiessenRGRichardsonIM. A physically based model for microstructure development in a macroscopic heat-affected zone: grain growth and recrystallization. Metall Mater Trans B2006; 37: 655–663.
21.
TolouiMMilitzerM. Phase field simulation of austenite grain growth in the HAZ of microalloyed linepipe steel. Int J Mater Res2010; 101: 542–548.
22.
NguyenNTOhtaAMatsuokaKet al.Analytical solutions for transient temperature of semi-infinite body subjected to 3-D moving heat sources. Weld J1999; 78: 265–274.
23.
ABAQUS V6.11. Providence, RI: Hibbitt, Karlsson and Sorensen, 2011.
24.
ShanXDaviesCMWangsdanTet al.Thermo-mechanical modelling of a single-bead-on-plate weld using the finite element method. Int J Pressure Vessel Piping2009; 86: 110–121.
25.
SmithMCSmithAC. NeT bead-on-plate round robin: Comparison of transient thermal predictions and measurements. Int J Pressure Vessel Piping2009; 86: 96–109.
26.
YaghiAHHydeTHBeckerAAet al.Numerical simulation of P91 pipe welding including the effects of solid-state phase transformation on residual stresses. Proc IMechE, Part L: J Materials: Design and Applications2007; 221: 213–224.
27.
Ó MurchúCLeenSBO’DonoghuePEet al.A physically-based creep damage model for effects of different precipitate types. Mater Sci Eng A2017; 682: 714–722.
28.
VivasJCapdevilaCJimenezJAet al.Effect of ausforming temperature on the microstructure of G91 steel. Metals2017; 7: 236–236.
29.
SrinivasPrasadBSRajkumarVBHariKumarKC. Numerical simulation of precipitate evolution in ferritic–martensitic power plant steels. CALPHAD2012; 36: 1–7.
30.
DavidSASiefertJAFengZ. Welding and weldability of candidate ferritic alloys for future advanced ultrasupercritical fossil power plants. Sci Technol Weld Join2013; 18: 631–651.
31.
JabbarehMAAssadiH. Modeling of grain structure and heat-affected zone in laser surface melting process. Metall Mater Trans B2013; 44: 1041–1048.
32.
MilovićLVuhererTBlačićIet al.Microstructures and mechanical properties of creep resistant steel for application at elevated temperatures. Mater Des2013; 46: 660–667.
33.
Rycroft C. Voro++: a three-dimensional Voronoi cell library in C++. Report no. LBNL-1432 E, 2009. Berkeley, CA: Lawrence Berkeley National Laboratory.
34.
SilwalBLiLDeceusterAet al.Effect of postweld heat treatment on the toughness of heat-affected zone for grade 91 steel. Weld J2013; 92: 80–87.
35.
LehtoPRemesHSaukkonenTet al.Influence of grain size distribution on the Hall–Petch relationship of welded structural steel. Mater Sci Eng A2014; 592: 28–39.
36.
ASTM E1382-97:2004. Standard test methods for determining average grain size using semiautomatic and automatic image analysis. Philadelphia, PA: ASTM International.
37.
ChanLHTuckerJCRohrerGSet al.Tail departure of log-normal grain size distributions in synthetic three-dimensional microstructures. Metall Mater Trans A2012; 43: 2810–2822.
38.
YaghiAHHydeTHBeckerAAet al.Residual stress simulation in welded sections of P91 pipes. J Mater Process Technol2005; 167: 480–487.
