An important aspect of the integrity of oil and gas pipelines is the heat-affected zone (HAZ) of girth welds where the microstructure of the as-hot rolled steel is altered with potentially adverse effects on the HAZ properties. Therefore, it is critical to evaluate the HAZ microstructure for different welding scenarios. Here, an integrated microstructure evolution model is proposed and applied to the HAZ of an X80 linepipe steel. The model considers dissolution of Nb-rich precipitates, austenite grain growth and austenite decomposition into ferrite and bainite. Microstructure maps showing the fraction of transformation products as a function of distance from the fusion line are obtained and used to compare the effect of different welding procedures on the HAZ microstructure.
MishraS. and DebRoyT.: ‘Non-isothermal grain growth in metals and alloys’, Mater. Sci. Technol., 2006, 22, 253–278. doi: 10.1179/174328406X84094
2.
AshbyM. F. and EasterlingK. E.: ‘A first report on diagrams for grain growth in welds’, Acta Metall., 1982, 30, 1969–1978. doi: 10.1016/0001-6160(82)90100-6
3.
AndersenI. and GrongO.: ‘Analytical modelling of grain growth in metals and alloys in the presence of growing and dissolving precipitates—I. Normal grain growth’, Acta Metall. Mater., 1995, 43, 2673–2688. doi: 10.1016/0956-7151(94)00488-4
4.
BanerjeeK., MilitzerM., PerezM. and WangX.: ‘Non isothermal austenite grain growth kinetics in a microalloyed X80 linepipe steel’, Metall. Mater. Trans. A, 2010, 41, 3161–3172. doi: 10.1007/s11661-010-0376-2
5.
MoonJ., LeeJ. and LeeC.: ‘Prediction for the austenite grain size in the presence of growing particles in the weld HAZ of Ti-microalloyed steel’, Mater. Sci. Eng. A, 2007, 459, 40–46. doi: 10.1016/j.msea.2006.12.073
BhadeshiaH. K. D. H., SvenssonL. E. and GretoftB.: ‘A model for the development of microstructure in low-alloy steel (Fe–Mn–Si–C) weld deposits’, Acta Metall., 1985, 33, 1271–1283. doi: 10.1016/0001-6160(85)90238-X
8.
GrongO.: ‘Metallurgical modeling of welding’, Materials modeling series; 1997, London, Institute of Materials.
9.
ZhangW., ElmerJ. W. and DebRoyT.: ‘Integrated modelling of thermal cycles, austenite formation, grain growth and decomposition in the heat affected zone of carbon steel’, Sci. Technol. Weld. Join., 2005, 10, 574–582. doi: 10.1179/174329305X48365
10.
MilitzerM.: ‘Computer simulation of microstructure evolution in low carbon sheet steels’, ISIJ Int., 2007, 47, 1–15. doi: 10.2355/isijinternational.47.1
11.
MaalekianM., RadisR., MilitzerM., MoreauA. and PooleW. J.: ‘In situ measurement and modelling of austenite grain growth in a Ti/Nb microalloyed steel’, Acta Mater., 2012, 60, 1015–1026. doi: 10.1016/j.actamat.2011.11.016
12.
MilitzerM., GiumelliA. K., HawboltE. B. and MeadowcroftT. R.: ‘Austenite grain growth kinetics in Al-killed plain carbon steels’, Metall. Mater. Trans. A, 1996, 27, 3399–3409. doi: 10.1007/BF02595433
13.
ZhangL. P., DavisC. L. and StrangwoodM.: ‘Effect of TiN particles and microstructure on fracture toughness in simulated heat-affected zones of a structural steel’, Metall. Mater. Trans. A, 1999, 30, 2089–2096. doi: 10.1007/s11661-999-0019-7
14.
EasterlingK.: ‘Introduction to the physical metallurgy of welding’; 1992, Oxford, Butterworth-Heinemann Ltd.
15.
ErogluM. and AksoyM.: ‘Effect of initial grain size on microstructure and toughness of intercritical heat-affected zone of a low carbon steel’, Mater. Sci. Eng. A, 2000, 286, 289–297. doi: 10.1016/S0921-5093(00)00801-7
16.
KouS.: ‘Welding metallurgy’; 2nd ed.; 2003, Hoboken, NJ, John Wiley & Sons Inc.
17.
IonJ. C., EasterlingK. E. and AshbyM. F.: ‘A second report on diagrams of microstructure and hardness for heat-affected zones in welds’, Acta Metall., 1984, 32, 1949–1962. doi: 10.1016/0001-6160(84)90176-7
18.
BhadeshiaH. K. D. H. and SvenssonL. E.: ‘Modelling the evolution of microstructure in steel weld metal’, in ‘Mathematical modeling of weld phenomena’ (eds. EasterlingK. E. and CerjakH.), 109–182; 1993, London, Institute of Materials.
19.
ThiessenR. G., RichardsonI. M. and SietsmaJ.: ‘Physically based modelling of phase transformations during welding of low-carbon steel’, Mater. Sci. Eng. A, 2006, 427, 223–231. doi: 10.1016/j.msea.2006.04.076
20.
GaudetM.: ‘The tensile properties and toughness of microstructures relevant to the HAZ of X80 Line pipe Steel Girth Welds’, PhD thesis, The University of British Columbia, Vancouver, BC, Canada, 2015.
21.
FazeliF., TaftehR., MilitzerM. and PooleW. J.: ‘Modeling the effect of Nb on austenite decomposition in advanced steels’, Proc. Int. Symp. on ‘The recent developments in plate steels’, 2011, AIST, Warrendale, PA, 343–350.
22.
FazeliF. and MilitzerM.: ‘Effect of Nb on austenite formation and decomposition in an X80 linepipe steel’, J. Iron Steel Res. Int., 2011, 18(1–2), 658–663.
23.
ReichertJ. M., GarcinT., MilitzerM. and PooleW. J.: ‘Formation of matensite/austenite (M/A) in X80 linepipe steel’, Proc. 9th Int. Pipeline Conf., 2012, Calgary, Alberta, Canada, IPC 2012–90465.
24.
ReichertJ. M. and MilitzerM.: ‘Quantifying the effect of Nb and Mo on transformation products using advanced EBSD analysis’, HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015, CSM/CAE/TMS, 2016, 143–149.
25.
ReichertJ. M., MilitzerM., PooleW. J. and CollinsL.: ‘A new approach using EBSD to quantitatively distinguish complex transformation products along the HAZ in X80 linepipe steel’, Proc. 11th Int. Pipeline Conf., 2014, Calgary, Alberta, Canada, IPC 2014–33668.
26.
ReichertJ. M., Personal communication, 2015.
27.
MilitzerM., PandiR. and HawboltE. B.: ‘Ferrite nucleation and growth during continuous cooling’, Metall. Mater. Trans. A, 1996, 27, 1547–1556. doi: 10.1007/BF02649814
28.
MilitzerM., HawboltE. B. and MeadowcroftT. R.: ‘Microstructural model for hot strip rolling of high-strength low-alloy steels’, Metall. Mater. Trans. A, 2000, 31, 1247–1259. doi: 10.1007/s11661-000-0120-4
29.
LiuD., FazeliF., MilitzerM. and PooleW. J.: ‘A microstructure evolution model for hot rolling of a Mo-TRIP steel’, Metall. Mater. Trans. A, 2007, 38, 894–909. doi: 10.1007/s11661-007-9116-7
30.
LuJ.: ‘Quantitative microstructural characterization of microalloyed steels’, PhD thesis, University of Alberta, Edmonton, AL, Canada, 2009, 165–177.
31.
ZenerC.: ‘Grains, phases, interfaces: an interpretation of microstructure’, Trans. AIME, 1948, 175, 15–51.
GladmanT.: ‘The physical metallurgy of microalloyed steels’, The Institute of Materials; 2002, London, UK, IOM Communications Ltd.
34.
UhmS., MoonJ., LeeC., YoonY., and LeeB.: ‘Prediction model for the austenite grain size in the coarse grained heat affected zone of Fe–C–Mn steels: considering the effect of initial grain size on isothermal growth behavior’, ISIJ Int., 2004, 44, 1230–1237. doi: 10.2355/isijinternational.44.1230
35.
HillertM.: ‘On the theory of normal and abnormal grain growth’, Acta Metall., 1964, 13, 227–238. doi: 10.1016/0001-6160(65)90200-2
36.
RiosP. R.: ‘Overview no. 62: A theory for grain boundary pinning by particles’, Acta Metall., 1987, 35, 2805–2814. doi: 10.1016/0001-6160(87)90280-X
37.
HumphreysF. J. and HatherlyM.: ‘Recrystallization and related annealing phenomena’, 2nd ed., 2004; Oxford, UK, Elsevier Ltd.
38.
IrvineK. J., PickeringF. B. and GladmanT.: ‘Grain refined C–Mn steels’, J. Iron Steel Inst., 1967, 205, 161–182.
39.
ÅgrenJ.: ‘A revised expression for the diffusivity of carbon in binary Fe–C austenite’, Scripta Metall., 1986, 20, 1507–1510. doi: 10.1016/0036-9748(86)90384-4
40.
MilitzerM., FazeliF. and Azizi-AlizaminiH.: ‘Modelling of microstructure evolution in advanced high strength steels’, La Metall. Ital., 2011, 4, 35–41.
41.
AliA. and BhadeshiaH. K. D. H.: ‘Nucleation of Widmanstätten ferrite’, Mater. Sci. Technol., 1990, 6, 781–784. doi: 10.1179/mst.1990.6.8.781
42.
FazeliF., JiaT. and MilitzerM.: ‘Critical assessment of bainite models for advanced high strength steels’, Sol. St. Phen., 2011, 172–174, 1183–1188. doi: 10.4028/www.scientific.net/SSP.172-174.1183
43.
TakayamaN., MiyamotoG. and FuruharaT.: ‘Effects of transformation temperature on variant pairing of bainitic ferrite in low carbon steel’, Acta Mater., 2012, 60, 2387–2396. doi: 10.1016/j.actamat.2011.12.018
44.
SarkarS., MoreauA., MilitzerM. and PooleW. J.: ‘Evolution of austenite recrystallization and grain growth using laser ultrasonics’, Metall. Mater. Trans. A, 2008, 39, 897–907. doi: 10.1007/s11661-007-9461-6
45.
KrugerS., LamoucheG., MonchalinJ. P., KolarkR., JeskeyG. and ChoquetM.: ‘On-line monitoring of wall thickness and austenite grain size on a seamless tubing production line at the Timken Company’, Iron Steel Technol., 2005, 2, 25–31.
46.
UedaK., GarcinT. and MilitzerM.: ‘In-situ measurement of austenite grain size through reverse transformation of low carbon steel’, Proc. Int. Conf. on ‘Solid-solid phase transformation in inorganic materials’, 2015, Whistler, BC, Canada, 681–682.
47.
HamadF., CollinsL. and VolkersR.: ‘Effect of GMAW procedure on the heat-affected zone (HAZ) toughness of X80 (grade 550) linepipe’, Proc. 7th Int. Pipeline Conf., 2008, Calgary, Alberta, Canada, IPC 2008–64097.
48.
LiX., MaX., SubramanianS. V., MisraR. D. K. and ShangC.: ‘Structure–property–fracture mechanism correlation in heat-affected zone of X100 ferrite-bainite pipeline steel’, Metall. Mat. Trans. E, 2015, 2, 1–11.
