Optimization and surface modification in electrical discharge machining of AA 6061/SiC p composite using Cu

Abstract

This paper presents the experimental investigation on the electro-discharge machining of aluminum alloy 6061 reinforced with SiC particles using sintered Cu–W electrode. Experiments have been designed as per central composite rotatable design, using response surface methodology. Machining characteristics such as material removal rate (MRR), electrode wear ratio (EWR), and surface roughness (SR) have been investigated under the influence of four electrical process parameters; namely peak current, pulse on time, pulse off time, and gap voltage. The process parameters have been optimized to obtain optimal combination of MRR, EWR, and SR. Further, the influence of sintered Cu–W electrode on surface characteristics has been analyzed with scanning electron microscopy, energy dispersive spectroscopy, and Vicker microhardness tests. The results revealed that all the process parameters significantly affect MRR, EWR, and SR. The machined surface properties are modified as a result of material transfer from the electrode. The recast layer thickness is increased at higher setting of electrical parameters. The hardness across the machined surface is also increased by the use of sintered Cu–W electrode.

Keywords

Aluminum composite dielectric fluid electrode electrical discharge machining material removal rate electrode wear ratio surface roughness

Get full access to this article

View all access options for this article.

References

Surappa

. Aluminium matrix composites: Challenges and opportunities. Sadhana 2003; 28: 319–334.

Kevorkijan

. Aluminum composites for automotive applications: A global perspective. JOM 1999; 51: 54–58.

Manna

Bhattacharyya

. A study on different tooling system during machining of Al/SiC-MMC. J Mater Process Technol 2000; 123: 476–482.

El-Gallab

Sklad

. Machining of Al/SiC particulate metal-matrix composites—part I: Tool performance. J Mater Process Technol 1998; 83: 151–158.

Pandey

Shan

. Modern machining processes, New Delhi: Tata McGraw Hill, 2008, pp. 840–840.

Singh

Raghukandan

Rathinasabapathi

. Electric discharge machining of Al-10%SiC_P as-cast metal matrix composites. J Mater Process Technol 2004; 155–156: 1653–1657.

Dhar

Purohit

Saini

. Mathematical modeling of electrical discharge machining of cast Al-4Cu-6Si alloy-10wt.% SiC composites. J Mater Process Technol 2007; 194: 24–29.

Habib

. Study of the parameters in electrical discharge machining through response surface, methodology approach. Appl Math Model 2009; 33: 4397–4407.

Seo

Kim

Ramulu

. Electrical discharge machining of functionally graded 15–35Vol% SiC_p/Al composites. Mater Manuf Process 2006; l21: 479–487.

10.

Singh

Kumar

. Influences of process parameters on MRR improvement in simple and powder mixed EDM of A6061/10%SiC composite. Mater Manuf Process 2015; 30: 303–312.

11.

Kern R. Sinker electrode material selection. Tech tips, EDM Today, July/August 2008.

12.

Beri

Maheshwari

Sharma

. Technological advancement in electrical discharge machining with powder metallurgy processed electrodes: A review. Mater Manuf Process 2010; 25: 1186–1197.

13.

Chen

Yan

. Dry Electrical discharge coating process on aluminum by using titanium powder compact electrode. Mater Manuf Process 2013; 28: 1286–1293.

14.

Wang

Fang

. Surface modification process by electrical discharge a machining with A Ti powder green compact electrode. J Mater Process Technol 2002; 129: 139–142.

15.

Lonardo

Buzzone

. Effect of flushing and electrode material on die sinking EDM. Ann CIRP 1999; 48: 123–126.

16.

Soni

Chakraverti

. Experimental investigation on migration of material during EDM of die steel (T215 Cr12). J Mater Process Technol 1996; 56: 439–451.

17.

Lee

. Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide. J Mater Process Technol 2003; 139: 315–321.

18.

Lee

. Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of tungsten carbide. J Mater Process Technol 2001; 115: 344–358.

19.

Zhan

Takahashi

Kunieda

. Dry electrical discharge machining of cemented carbide. J Mater Process Technol 2004; 149: 353–357.

20.

Curodeau

Rishard

Villeneuve

. Molds surface finishing with new EDM process in air with thermoplastic composite electrodes. J Mater Process Technol 2004; 149: 278–283.

21.

Singh

Maheshwari

Pandey

. Some investigations into the electric discharge machining of hardened tool steel using different electrode materials. J Mater Process Technol 2004; 149: 272–277.

22.

Ferreira

. A study of die helical thread cavity surface finish made by Cu-W electrodes with planetary EDM. Int J Adv Manuf Technol 2007; 34: 1120–1132.

23.

Chen

Y-F

Chow

H-M

Lin

Y-C

. Surface modification using semi-sintered electrodes on electrical discharge machining. Int J Adv Manuf Technol 2008; 36: 490–500.

24.

Janmanee

Muttamara

. Performance of difference electrode materials in electrical discharge machining of tungsten carbide. Energy Res J 2010; 1: 87–90.

25.

Eswara

Patowari

. Parametric study of electric discharge coating using powder metallurgical green compact electrodes. Mater Manuf Process 2014; 29: 1131–1138.

26.

Muthuramalingam

Mohan

. Influence of tool electrode properties on machinability in spark erosion machining. Mater Manuf Process 2013; 28: 939–943.

27.

Dewangan

Biswas

Gangopadhyay

. Influence of different tool electrode materials on EDMed surface integrity of AISI P20 tool steel. Mater Manuf Process 2014; 29: 1387–1394.

28.

Montgomery

. Design and analysis of experiments, 5th ed. New Delhi: Wiley India Pvt. Ltd., 2010.

29.

Kumar

Shan

. Effect of process parameters on the solidification time of Al-7% Si alloy castings produced by VAEPC process. Mater Manuf Process 2007; 22: 879–886.

30.

Singh B, Kumar J and Kumar S. Investigating the influence of process parameters of ZNC EDM on machinability of A6061/10% SiC composite. Adv Mater Sci Eng 2013. http://dx.doi.org/10.1155/2013/173427.

31.

Das

Misra

. Experimental investigation on surface modification of aluminum by electric discharge coating process using TiC/Cu green compact tool-electrode. Mach Sci Technol 2012; 16: 601–623.

Optimization and surface modification in electrical discharge machining of AA 6061/SiC p composite using Cu–W electrode

Abstract

Keywords

Get full access to this article

References