In the present study a modified crack growth model (MCGM) is introduced to analyse the crack propagation status in the damaged zone of fibre reinforced composites. The damaged zone is modelled on the basis of a virtual crack being subjected to a cohesive closure stress. The residual strengths of composite laminates are evaluated characterizing the matrix crack density at the damaged zone and defining a relationship between the plate stiffness before and after damage. Experimental tests were performed employing epoxy/glass fibre reinforced composite laminates to determine the residual strength of centre cracked specimens. The residual strength of composite panels using the new model correlates well with experimental results when compared with previous models.
NuismerR. J.WhitneyJ. M.Uni-axial fracture of composite laminates containing stress concentrations. ASTM STP 593, American Society for Testing and Materials, Philadelphia, 1975, pp. 117–142.
3.
KarlakR. F.Hole effects in a related series of symmetrical laminates. In Proceedings of 4th Joint ASM-Metallurgical Society of AIME Symposium onFailure Modes in Composites, 1979, pp. 105–117.
BäcklundJ.Fracture analysis of notched compositesComputers and Struct., 1981, 13, 145–154.
6.
BäcklundJ.AronssonC.-G.Tensile fracture of laminates with holeJ. Composite Mater., 1986, 20, 259–286.
7.
AronssonC.-G.BäcklundJ.Tensile fracture of laminates with cracksJ. Composite Mater., 1986, 20, 287–307.
8.
AronssonC.-G.BäcklundJ.Damage mechanics analysis of matrix effects in notched laminates In Composite Materials: Fatigue and Fracture, 1986, ASTM STP 907, pp. 134–157 (American Society for Testing and Materials, Philadelphia).
9.
AronssonC.-G.Staking sequence effects on fracture of notched carbon fiber/epoxy compositesComposite Sci. Technol., 1985, 24, 179–198.
10.
CarlssonL. A.AronssonC.-G.BäcklundJ.Notch sensitivity of thermoset and thermoplastic laminate loaded in tensionJ. Mater. Sci., 1988.
11.
AronssonC.-G.HollmanK.Strength prediction of carbon/epoxy composites with small holes and small cracks. In Proceedings of International Symposium onComposite Materials and Structures, ISCMS, 1986, pp. 737–745.
12.
ErikssonI.AronssonC. G.Strength of tensile loaded graphite/epoxy laminates containing cracks, open and filled holesJ. Composite Mater., 1990, 24, 456–482.
13.
Afaghi-KhatibiA.YeL.MaiY.-W.Effective crack growth and residual strength of composite laminates with a sharp notchJ. Composite Mater., 1996, 30, 333–357.
14.
IrwinG. R.Fracture In Handbuch der Physik, 1958, Vol. 6, pp. 551–590 (Springer, Berlin).
15.
ParkerA. P.The mechanics of fracture and fatigue, an introduction, 1981 (E. &F. N. Spon, London).
16.
SchwalbeK.-H.A modification of COD concept and its tentative application to the residual strength of centre cracked panels In Fracture Mechanics, 1980, ASTM STP 700, pp. 500–512 (American Society for Testing and Materials, Philadelphia).
17.
NewmanJ. C.A crack-closure model for predicting fatigue crack growth under aircraft spectrum loading In Methods and Models for Predicting Fatigue Crack Growth under Random Loading, 1981, ASTM STP 748, pp. 53–84 (American Society for Testing and Materials, Philadelphia).
18.
ShahidI.An accumulative damage model for tensile and shear failures of laminated composite platesJ. Composite Mater., 1995, 29, 926–981.
19.
VarnaJ.Effective properties of damaged laminated composites reinforced with continuous UD fibers. ECCM-10, Brugge, Belgium, 2002.
20.
VarnaJ.JoffeR.KrasnikovsA.COD based simulation of transverse cracking and stiffness reduction in [S, 90n]S laminatesComposite Sci. Technol., 2001, 61, 637–656.
