Many investigations into laser oscillations for mitigating severe porosity in aluminum alloys have involved trading off penetration depth, potentially disrupting the porosity suppression mechanism. In this study, an oscillation laser butt-lap welding technique was designed, and the effect of oscillation frequency on cross-section morphologies and porosity rate was investigated while maintaining the constant weld depth. The findings unveiled that heightened oscillation frequencies led to diminished porosity levels, and this pattern remained consistent, even in cases where weld depths were extended. High-frequency laser beam oscillation enhanced the stability of the keyhole, increased the duration of the molten pool existence, and reduced porosity to 0.17%. Thus, this study offered significant insights into the impact of oscillation on laser welding of aluminum alloys.
ChenXJiangNJiangM, et al.Numerical investigation of asymmetric weld fusion geometry in laser welding of aluminium alloy with beam oscillation. Sci Technol Weld Join2022; 27: 595–605.
2.
DahiyaKMehrotraPKhannaP. Mathematical modelling to predict angular distortion in MIG welding of aluminium 6063 plates. Mater Today Proc2022; 62: 3183–3188.
3.
GrabmannSMayrLKickMK, et al.Enhancing laser-based contacting of aluminum current collector foils for the production of lithium-ion batteries using a nanosecond pulsed fiber laser. Procedia CIRP2022; 111: 778–783.
4.
LiuZWangKHeH, et al.Method for evaluating laser welding quality of battery module based on coupling model. J Power Sources2022; 546: 231959.
5.
LiuFTanCMaG, et al.Method for evaluating laser welding quality of battery module based on coupling model. Sci Technol Weld Join2022; 27: 437–445.
6.
HuangLHuaXWuD. Relationship between the weld pool convection and metallurgical and mechanical properties in hybrid welding for butt joint of 10-mm-thick aluminum alloy plate. Welding in the World2018; 62: 895–903.
7.
MaDJiangPShuL, et al.Multi-sensing signals diagnosis and CNN-based detection of porosity defect during al alloys laser welding. J Manuf Syst2022; 62: 334–346.
8.
SetoNKatayamaSMatsunawaA. High-speed simultaneous observation of plasma and keyhole behavior during high power CO2 laser welding: effect of shielding gas on porosity formation. J Laser Appl2000; 12: 245–250.
9.
AminzadehABarkaNEl OuafiA, et al.Experimental analysis of overlap fiber laser welding for aluminum alloys: porosity recognition and quality inspection. Opt Lasers Eng2024; 173: 107890.
10.
Sattarpanah KarganroudiSFeujofack KemdaVBBarkaN. A novel method of identifying porosity during laser welding of galvanized steels using microhardness pattern matrix. Manuf Lett2020; 25: 98–101.
11.
YanSMengZChenB, et al.Prediction of temperature field and residual stress of oscillation laser welding of 316LN stainless steel. Opt Laser Technol2022; 145, 107493.
12.
GaoXSWuCSGoeckeSF, et al.Numerical simulation of temperature field, fluid flow and weld bead formation in oscillating single mode laser-GMA hybrid welding. J Mater Process Technol2017; 242: 147–159.
13.
ChenCWangCChenN, et al.Effect of multiple hit and break of oscillating pulse laser-TIG hybrid welding on porosity suppression of ultra-high strength steel. J Manuf Process2022; 83: 387–397.
14.
ZhangCYuYChenC, et al.Suppressing porosity of a laser keyhole welded AL-6Mg alloy via beam oscillation. J Mater Process Technol2020; 278: 116382.
15.
KabasakalogluTSErdoganM. Characterisation of figure-eight shaped oscillation laser welding behaviour of 5083 aluminium alloy. Sci Technol Weld Join2020; 25: 609–616.
16.
RamiarisonHBarkaNAmiraS. Optimization of parameters in laser welding of aluminum alloy 5052-H32 using beam oscillation technique for mechanical performance improvement. Int J Lightweight Mater Manuf2022; 5: 470–483.
17.
XiaHTaoWLiL, et al.Ninshu Effect of laser beam models on laser welding–brazing al to steel. Opt Laser Technol2020; 122: 105845.
18.
YuanGZhouZLiX, et al.Blue laser welding of 7075-T6 aluminum alloy and carbon fiber reinforced polyetheretherketone. Opt Laser Technol2022; 155, 108440.
19.
YangBZhaoHWuL, et al.Interfacial microstructure and mechanical properties of laser-welded 6061Al/AISI304 dissimilar lap joints via beam oscillation. J Mater Res Technol2020; 9: 14630–14644.
20.
ShiLLiXJiangL, et al.Numerical study of keyhole-induced porosity suppression mechanism in laser welding with beam oscillation. Sci Technol Weld Join2021; 26: 349–355.
21.
WangLGaoMZhangC, et al.Effect of beam oscillating pattern on weld characterization of laser welding of AA6061-T6 aluminum alloy. Mater Des2016; 108: 707–717.
22.
XuJRongYHuangY, et al.Keyhole-induced porosity formation during laser welding. J Mater Process Technol2018; 252: 720–727.
23.
MaCChenBMengZ, et al.Characteristic of keyhole, molten pool and microstructure of oscillating laser TIG hybrid welding. Opt Laser Technol2023; 161, 109142.
24.
KawahitoYMatsumotoNAbeY, et al.Relationship of laser absorption to keyhole behavior in high power fiber laser welding of stainless steel and aluminum alloy. J Mater Process Technol2011; 211: 1563–1568.
25.
HummelMHagenlocherCHaeuslerA, et al.Analysis on the influence of vapor capillary aspect ratio on pore formation in laser beam welding of aluminum. J Mater Process Technol2023; 312, 117862.
26.
SchweierMHeinsJFHauboldMW, et al.Spatter formation in Laser welding with beam oscillation. Phys Procedia2013; 41: 20–30.
27.
XuBLiuFLinD, et al.Investigation of weld formation and porosity in 5052 aluminium alloy laser-GMA hybrid welding assisted by magnetic field with different orientations. Sci Technol Weld Join2022; 27: 672–682.
28.
WangLLiuYYangC, et al.Study of porosity suppression in oscillating laser-MIG hybrid welding of AA6082 aluminum alloy.J Mater Process Technol2021; 292, 117053.
