Sage Journals: Discover world-class research

Abstract

In this experimental study, three stable nano-bio-lubricants were prepared by dispersing CuO nanoparticles in three bio-lubricants and later investigations were carried out to determine pressure distribution and frictional performance of ISO VG46 oil, bio-lubricants and nano-bio-lubricants in hydrodynamic journal bearing under different loads and speeds. The experimental results revealed that pressure of oils inside bearing depends on viscosity of oils. Addition of nanoparticles in bio-lubricants did not help to enhance the maximum pressure of oil inside bearing. Frictional performance of ISO VG46 oil and bio-lubricants was according to their viscosity but coefficient of friction of nano-bio-lubricants was higher compared to ISO VG46 oil inspite of having approximately same viscosity compared to ISO VG46 oil. Among all the oils, ISO VG46 oil and bio-lubricant 9010 had similar performance and hence Bio-lubricant 9010 can be used in place of ISO VG46 oil in journal bearing.

Keywords

Journal bearing bio-lubricants nano-bio-lubricants ISO VG46

Get full access to this article

View all access options for this article.

References

Ferron

Frene

Boncompain

. A study of the thermohydrodynamic performance of a plain journal bearing comparison between theory and experiments. J Lubricat Technol 1983; 105: 422–428.

Kasolang

Ahmad

Joyce

, et al. Preliminary study of pressure profile in hydrodynamic lubrication journal bearing. Proc Eng 2012; 41: 1743–1749.

Baskar S and Sriram G. Experimental analysis of hydrodynamic journal bearing under different biolubricants. In: IEEE-International Conference On Advances In Engineering, Science And Management (ICAESM -2012), Nagapattinam, Tamil Nadu, India, 30-31 March 2012, pp. 132–135. IEEE.

Durak

Çetinkaya

Yeinigün

, et al. Effects of sunflower oil added to base oil on the friction coefficient of statically loaded journal bearings. Lubricat Sci 2004; 21: 207–222.

Durak

. A study on friction behavior of rapeseed oil as an environmentally friendly additive in lubricating oil. Ind Lubricat Tribol 2004; 56: 23–37.

Baskar S and Sriram G. Pressure distribution analysis of a hydrodynamic journal bearing using vegetable oil based nano lubricant. In: International Conference on Advances in Tribology, NIT, Calicut, India, 22 February 2014.

Baskar

Sriram

Arumugam

. Tribological analysis of a hydrodynamic journal bearing under the influence of synthetic and biolubricants. Tribol Transac 2017; 60: 428–436.

Solghar

. Investigation of nanoparticle additive impacts on thermohydrodynamic characteristics of journal bearings. Proc IMechE, Part J: J Engineering Tribology 2015; 229: 1176–1186.

Willing

. Lubricants based on renewable resources – an environmentally compatible alternative to mineral oil products. Chemosphere 2001; 43: 89–98.

10.

Asadauskas

. Oxidative stability and antiwear properties of high oleic vegetable oils. Lubricat Eng 1996; 52: 877.

11.

Shahabuddin

Masjuki

Kalam

. Experimental investigation into tribological characteristics of bio-lubricant formulated from Jatropha oil. Proc Eng 2013; 56: 597–606.

12.

El-Kinawy

El-Hamidi

Abdallah

. Utilization of non edible oils in lubrication as substitution to mineral oils. J Appl Sci Res 2013; 9: 3492–3496.

13.

Joseph

Saxena

Sharma

. Study of some non-edible vegetable oils of Indian origin for lubricant application. Lubricat Sci 2007; 24: 181–197.

14.

Nicoletti

. The importance of the heat capacity of lubricants with nanoparticles in the static behavior of journal bearings. J Tribol 2014; 136: 044502.

15.

Monshi

Foroughi

Monshi

. Modified Scherrer equation to estimate more accurately nano-crystallite size using XRD. World J Nano Sci Eng 2012; 2: 154–160.

16.

Zhang

. Oleic acid coating on the monodisperse magnetite nanoparticles. Appl Surf Sci 2006; 253: 2611–2617.

17.

Kole

Dey

. Enhanced thermophysical properties of copper nanoparticles dispersed in gear oil. Appl Therm Eng 2013; 56: 45–53.

18.

Katpatal DC, Andhare AB and Padole PM. Viscosity behaviour and thermal conductivity prediction of CuO-blend oil based nano-blended lubricant. Proc IMechE, Part J: J Engineering Tribology. 2019; 2019: 1350650119864242.

19.

Brito

Miranda

Bouyer

, et al. Experimental investigation of the influence of supply temperature and supply pressure on the performance of a two-axial groove hydrodynamic journal bearing. J Tribol 2007; 129: 98–105.

20.

Bhandari

. Machine design data book 20141st ed.. McGraw Hill.

21.

Bouyer

Fillon

. Experimental measurement of the friction torque on hydrodynamic plain journal bearings during start-up. Tribol Int 2011; 44: 772–781.

22.

Adatepe

Bıyıklıoglu

Sofuoglu

. An experimental investigation on frictional behavior of statically loaded micro-grooved journal bearing. Tribol Int 2011; 44: 1942–1948.

Performance of nano-bio-lubricants,ISO VG46 oil and its blend with Jatropha oil in statically loaded hydrodynamic plain journal bearing

Abstract

Keywords

Get full access to this article

References