In the present study, computational data are presented regarding the tribological behaviour of convex and concave journal bearing configurations under hydrodynamic lubrication. In specific cases these results may improve journal bearing tribological properties especially by decreasing the specific tribosystem friction losses. In this direction, a journal bearing anti-friction optimization procedure is enabled.
BurtonR. A.Effects of two-dimensional, sinusoidal roughness on the load support characteristics of a lubricant filmTrans. ASME, J. Basic Engng, 1963, 85, 258–264.
2.
ChristensenH.TonderK.The hydrodynamic lubrication of rough journal bearingsTrans. ASME, J. Lubric. Technol., 1973, 95, 166–172.
3.
PatirN.ChengH. S.An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubricationTrans. ASME, 1978, 100, 12–16.
4.
PatirN.ChengH. S.Application of average flow model to lubrication between rough sliding surfacesTrans. ASME, 1979, 101, 220–230.
5.
TealeJ. L.LebeckA. O.An evaluation of the average flow model for surface roughness effects in lubricationTrans. ASME, 1980, 102, 360–367.
6.
TuragaR.SekharA. S.MajumdarB. C.The effect of roughness parameter on the performance of hydrodynamic journal bearings with rough surfacesTribology Int., 1999, 32, 231–236.
7.
PandazarasC.PetropoulosG.KoutlasG.Numerical modelling of the functional behaviour of finite sliding hydrodynamically lubricated journal bearings considering macrogeometrical deviations and dynamic loadJ. Balkan Tribological Ass., 1999, 5 (3), 43–55.
8.
PandazarasC.PetropoulosG.KoutlasG.Numerical modelling of the behaviour of various type finite journal bearings under dynamic loadingTribology in Industry, 1999, 21 (3), 90–102.
9.
PandazarasC.PetropoulosG.On the relationship between surface waviness and roughness parameters in turning: Assessment of hydrodynamically lubricated journal bearings performanceTribology in Industry, 1999, 21 (4), 121–132.
10.
RuddyA. V.DowsonD.TaylorC. M.The prediction of film thickness in a mechanical face seal with circumferential waviness on both the face and the sealJ. Mech. Sci., 1982, 24 (1), 37–43.
11.
HargreavesD. J.Surface waviness effects on the load carrying capacity of rectangular slider bearingsWear, 1991, 145, 137–151.
12.
LinJ. R.Steady state performance of finite hydrodynamic journal bearing with three-dimensional irregularitiesTrans. ASME, J. Tribology, 1994, 176, 95–102.
13.
RasheedH. E.Effect of surface waviness on the hydrodynamic lubrication of plain cylindrical sliding element bearingWear, 1998, 223, 1–6.
14.
StrzeleckiS.Friction loss of 2-lobe journal bearing with different bush profile. In Proceedings of the Balkan Tribology Conference (BALKANTRIB ′99), Sinaia, Romania, 1999, pp. 379–386.
15.
DimofteF.Bearings with non-conventional geometry (or wave bearings)—an advanced bearing technology. In Proceedings of the Balkan Tribology Conference (BALKANTRIB ′99), Sinaia, Romania, 1999, pp. 425–440.
PandazarasC.Comparison of journal bearing operational magnitudes calculated through various modern theoretical simulation modelsInd. Lubric. Tribology, 2001, 53 (5), 190–201.
18.
CameronA.Basic Lubrication Theory, 1981 (Ellis Horwood, Chichester, West Sussex).
