Sage Journals: Discover world-class research

Abstract

Although surface topography is a directive and useful method to evaluate the quality of worn components, the common belief that the surface roughness after running-in is independent of the nature of initial roughness makes it difficult to investigate the surface topography of worn components after running-in based on unworn surface before running-in process. Trying to build the connection of surface topography before and after running-in, this article assumed running-in as a black box and adopted support vector machine as machine learning method to simulate the complex process. Through the training and validation of the simulation, the predictive model of surface topography after running-in based on unworn surface topography was established, which indicated the existence of a correlation between the surface topographies before and after running-in. The model analysis revealed that the hybrid properties of surface topographies before and after running-in have strong correlation. Especially, the correlation between input parameter Sk and output parameter Sq is a particular one among all relationships of parameter pairs.

Keywords

Surface topography running-in wear support vector machine

Get full access to this article

View all access options for this article.

References

Blau

. On the nature of running-in. Tribol Int 2005; 38: 1007–1012.

Kragelsky

Dobychin

Kombalov

. Friction and wear: calculation methods, Oxford: Pergamon, 1982.

Masouros

Dimarogonas

Lefas

. A model for wear and surface roughness transients during the running-in of bearings. Wear 1977; 45: 375–382.

Pawlus

. Change of cylinder surface topography in the initial stage of engine life. Wear 1997; 209: 69–83.

Jeng

Lin

Shyu

. Changes of surface topography during running-in process. J Tribol 2004; 126: 620–625.

Chen

. Fractal prediction models of sliding wear during the running-in process. Wear 1999; 231: 249–255.

Yuan

Peng

Zhou

. The surface roughness evolutions of wear particles and wear components under lubricated rolling wear condition. Wear 2005; 259: 512–518.

Kumar

Prakash

Sethuramiah

. A systematic methodology to characterize the running-in and steady-state wear processes. Wear 2002; 252: 445–453.

Akbarzadeh

Khonsari

. On the prediction of running-in behavior in mixed-lubrication line contact. J Tribol 2010; 132: 032102-1–032102–11.

10.

Cristianini

Shawe-Taylor

. An introduction to support vector machines, Cambridge, MA: Cambridge University Press, 2000.

11.

Kerhet

Raffetto

Bonia

. A SVM-based approach to microwave breast cancer detection. Eng Appl Artif Intel 2006; 19: 807–818.

12.

Lela

Bajić

Jozić

. Regression analysis, support vector machines, and bayesian neural network approaches to modeling surface roughness in face milling. Int J Adv Manuf Technol 2009; 42: 1082–1088.

13.

Zhang

Ding

. A vision inspection system for the surface defects of strongly reflected metal based on multi-class SVM. Expert Syst Appl 2011; 38: 5930–5939.

14.

Wei

Sun

. Surface quality prediction and processing parameter determination in electrochemical mechanical polishing of bearing rollers. Int J Adv Manuf Technol 2012; 63: 129–136.

15.

Slavkovic

Jugovic

Dragicevic

. An application of learning machine methods in prediction of wear rate of wear resistant casting parts. Comput Ind Eng 2013; 64(3): 850–857.

16.

Shi

Gindy

. Tool wear predictive model based on least squares support vector machines. Mech Syst Signal Pr 2007; 21: 1799–1814.

17.

Jones

Jansen

Fusaro

. Preliminary investigation of neural network techniques to predict tribological properties. Tribol Trans 1997; 40: 312–320.

18.

Tian

Gao

. Study and application of artificial neural network, Beijing, China: Beijing Institute of Technology Press, 2006.

19.

Suykens

JAK

Brabanter

Lukas

. Weighted least squares support vector machines: robustness and sparse approximation. Neurocomputing 2002; 48: 85–105.

20.

Wang

. Support vector machines: theory and applications, Berlin, Heidelberg: Springer-Verlag GmbH, 2005.

21.

Saravanan

Siddabattuni

VNSK

Ramachandran

. A comparative study on classification of features by SVM and PSVM extracted using Morlet wavelet for fault diagnosis of spur bevel gear box. Expert Syst Appl 2008; 35: 1351–1366.

22.

Rychetsky

. Algorithms and architectures for machine learning based on regularized neural networks and support vector approaches, Berlin, Germany: Shaker Verlag GmbH, 2001.

23.

Wang

Neskovic

Cooper

. Training data selection for support vector machines. In: Advances in natural computation, Berlin, Germany: Springer, 2005, pp. 554–564.

24.

Campbell

. Kernel methods: a survey of current techniques. Neurocomputing 2002; 48: 63–84.

25.

Vapnik

Lerner

. Pattern recognition using generalized portrait method. Automat Rem Contr 1963; 24: 774–780.

26.

Schölkopf

Smola

. Learning with kernels: support vector machines, regularization, optimization and beyond, Cambridge, MA: MIT Press, 2002.

27.

ISO TS16610-31:2010. Geometrical product specifications (GPS) – filtration – part 31: robust profile filters: Gaussian regression filters.

28.

ISO 25178-2:2012. Geometrical product ppecifications (GPS) – surface texture: areal – part 2: terms, definitions and surface texture parameters.

29.

ISO 25178-3:2012. Geometrical product specifications (GPS) – surface texture: areal – part 3: specification operators.

30.

Reizer

Galda

Dzierwa

. Simulation of textured surface topography during a low wear process. Tribol Inter 2011; 44: 1309–1319.

A parameter prediction model of running-in based on surface topography

Abstract

Keywords

Get full access to this article

References