Sage Journals: Discover world-class research

Abstract

For various reasons, manufacturers of cold-forged steel parts are becoming increasingly interested in forming at elevated temperatures below 500 °C. The objective of this study, published by the Institute for Metal Forming Technology (IFU) of the University of Stuttgart, is to evaluate the capability of various phosphate coatings in combination with MoS₂ lubrication for extrusion processes of steel parts at elevated temperatures; it emphasizes the temperature range between 250 °C and 500 °C. Temperature resistance and the lubricating effect of the tested lubrication systems were examined using the double-cup-extrusion-test. Additionally, friction factors were calculated by comparing the test results with finite-element analysis.

Keywords

steel extrusion elevated temperatures lubricant carrier coatings double-cup-extrusion-test friction factor estimation

Get full access to this article

View all access options for this article.

References

Liewald, M., Mletzko, C., Felde, A., and Meidert, M. Evaluation of lubricants for bulk metal forming of steel at elevated temperatures using double-cup-extrusion-test and spike-test. In Proceedings of the 42ndInternational Cold Forging Group Plenary Meeting, Shanghai, People's Republic of China, 20–24 September 2009, pp. 167–174.

Groche

Kappes

Dünkel

Mauer

Die Bedeutung von Tribologie-Modellversuchen für die Kaltmassivumformung (in German). Tribologie und Schmierungstechnik, 2002, 49(6), 15–18.

Burgdorf

Über die Ermittlung des Reibwertes fürVerfahren der Massivumformung durch den Ringstauchversuch (in German). Industrieanzeiger, 1967, 89, 623–629.

Pöhlandt

Banabic

Lange

On the determination of friction coefficients by ring compression. UTFscience, 2004, 3, 1–3.

Geiger, M. Der Stofffluß beim kombinierten Napffließpressen (in German). Doctoral Thesis, University of Stuttgart, 1976.

Buschhausen

Weinmann

Lee

Altan

Evaluation of lubrication and friction in cold forging using a double backward-extrusion process. J.Mater. Process. Technol., 1992, 33(1–2), 95–108.

Ghobrial

M. I.

Lee

Altan

Bay

Hansen

Factors affecting the double cup extrusion test for evaluation of friction in cold and warm forging. CIRP Ann. – Manuf. Technol., 1993, 42(1), 347–351.

Tan

Bay

Zhang

On parameters affecting metal flow and friction in the double cup extrusion test. Scand. J. Metall., 1998, 27(6), 246–252.

Kim, H., Padwad, S., and Altan, T. Evaluation of new lubricants for cold forging without zinc phosphate coating. In Proceedings of the 37th International Cold Forging Group Plenary Meeting, Istanbul, Turkey, 12–15 September 2004, pp. 1–7.

10.

Schrader, T., Shirgaokar, M., and Altan, T. Analysis of double cup extrusion test for evaluation of lubricants. In Proceedings of the 4th JSTP International Seminar on Precision forging, Nara, Japan, 21–24 March 2006, pp. 77–82.

11.

Schrader

Shirgaokar

Altan

A critical evaluation of the double cup extrusion test for selection of cold forging lubricants. J. Mater. Process. Technol., 2007, 189(1–3), 36–44.

12.

Mletzko, C., Liewald, M., and Felde, A. Evaluation of lubricant carrier coatings for bulk metal forming of steel at elevated temperatures using double-cup-extrusion-test. In Proceedings of the 4th International Conference on Tribology in manufacturing processes, Nice, France, 13–15 June 2010, pp. 61–70.

13.

ICFG (Ed.) International Cold Forging Group 1967–1992: Objectives, history, published documents, 1992 (Meisenbach Verlag, Bamberg).

14.

VDE e.V. (Ed.) Taschenbuch der Stahl-Eisen-Werkstoffblätter (in German), 2001 (Verlag Stahleisen, Düsseldorf).

15.

Bay

Azushima

Groche

Ishibashi

Merklein

Morishita

Nakamura

Schmid

Yoshida

Environmentally benign tribo-systems for metal forming. CIRP Ann. Manuf. Technol., 2010, 59(2), 760–780.

Evaluation of lubricant carrier coatings for bulk metal forming of steel at temperatures between 250 °C and 500 °C using the double-cup-extrusion-test

Abstract

Keywords

Get full access to this article

References