Obtuse triangle screw configuration for optimal internal fixation of femoral neck fracture: an anatomical analysis

Abstract

Objectives:

To identify the optimal screw configuration for internal fixation of femoral neck fractures based on anatomic analysis on radiologic imaging.

Methods:

30 proximal femurs of 15 adults were constructed by CT. 3 femoral neck sections (FNS), the subcapital, medial, and the fundus, were projected on to the lateral femoral trochanteric wall. The simulated 3 screw configurations in the projection of FNS include: 2 inverted equilateral triangles symmetrised to the axis of the FNS (IET-FNS group) or the coronal axis of the proximal femur (IET-PR group) and an obtuse triangle (OT group). The distance between the screws, the distance between the centre of the FNS and the screws, and the area ratio of the triangle/FNS were calculated.

Results:

The projection of the FNS on to the lateral femoral trochanteric wall is displayed as a rotating forward ellipse. Measurements of distance between screws, distance between the centre of the FNS to the screws, and the area ratio of triangle/FNS were significantly larger in the OT group than in the IET-FNS and IET-PF groups (p < 0.05). The values of the 3 parameters in the IET-FNS group were also larger than those in the IET-PF group (p < 0.05).

Conclusions:

The obtuse triangle screw configuration displayed advantages with respect to the parameters of distance between screws, distance between the centre of FNS to screws, and the triangle area. Therefore, the obtuse triangle screw configuration may be the ideal pattern for internal fixation of femoral neck fractures (Pauwels I and II). This needs to be corroborated with biomechanics testing.

Keywords

Femoral neck section femoral neck torsion angle internal fixation inverted triangle obtuse triangle screw configuration

Get full access to this article

View all access options for this article.

References

Bhandari

Tornetta

III Hanson

et al . Optimal internal fixation for femoral neck fractures: multiple screws or sliding hip screws? J Orthop Trauma 2009; 23: 403–407.

Luttrell

Beltran

Collinge

. Preoperative decision making in the treatment of high-angle “vertical” femoral neck fractures in young adult patients. An expert opinion survey of the Orthopaedic Trauma Association’s (OTA) membership. J Orthop Trauma 2014; 28: e221–e225.

Lindequist

Törnkvist

. Quality of reduction and cortical screw support in femoral neck fractures. An analysis of 72 fractures with a new computerized measuring method. J Orthop Trauma 1995; 9: 215–221.

Lindequist

. Cortical screw support in femoral neck fractures. A radiographic analysis of 87 fractures with a new mensuration technique. Acta Orthop Scand 1993; 64: 289–293.

Basso

Klaksvik

Syversen

et al . Biomechanical femoral neck fracture experiments–a narrative review. Injury 2012; 43: 1633–1639.

Hao

Mauffrey

et al . Optimizing stability in femoral neck fracture fixation. Orthopedics 2015; 38: 625–630.

Maurer

Wright

Kummer

et al . Two or three screws for fixation of femoral neck fractures? Am J Orthop (Belle Mead NJ) 2003; 32: 438–442.

Kauffman

Simon

Kummer

et al . Internal fixation of femoral neck fractures with posterior comminution: a biomechanical study. J Orthop Trauma 1999; 13: 155–159.

Gurusamy

Parker

Rowlands

. The complications of displaced intracapsular fractures of the hip: the effect of screw positioning and angulation on fracture healing. J Bone Joint Surg Br 2005; 87: 632–634.

10.

Tan

Wong

Born

et al . Two-screw femoral neck fracture fixation: a biomechanical analysis of 2 different configurations. Am J Orthop (Belle Mead NJ) 2007; 36: 481–485.

11.

Zdero

Keast-Butler

Schemitsch

. A biomechanical comparison of two triple-screw methods for femoral neck fracture fixation in a synthetic bone model. J Trauma 2010; 69: 1537–1544.

12.

Oakey

Stover

Summers

et al . Does screw configuration affect subtrochanteric fracture after femoral neck fixation? Clin Orthop Relat Res 2006; 443: 302–306.

13.

Selvan

Oakley

Rangan

et al . Optimum configuration of cannulated hip screws for the fixation of intracapsular hip fractures: a biomechanical study. Injury 2004; 35: 136–141.

14.

Kate

. Anteversion versus torsion of the femoral neck. Acta Anat (Basel) 1976; 94: 457–463.

15.

Gurusamy

Parker

Rowlands

. The complications of displaced intracapsular fractures of the hip. J Bone Joint Surg Br 2005; 87: 632–634.

16.

Liebergall

Ben-David

Weil

et al . Computerized navigation for the internal fixation of femoral neck fractures. J Bone Joint Surg Am 2006; 88: 1748–1754.

17.

Narra

Nikander

Viik

et al . Femoral neck cross-sectional geometry and exercise loading. Clin Physiol Funct Imaging 2013; 33: 258–266.

18.

Zhang

Chang

Huang

et al . The femoral neck safe zone: a radiographic simulation study to prevent cortical perforation with multiple screw insertion. J Orthop Trauma 2015; 29: e178–e182.