This work deals with the durability assessment, after ageing, of wood-based sandwich panels, carried out according to the European guideline ETAG 016, Annex C7 Climatic testing cycles. ETAG 016-2 is a guideline to assess the wood-based sandwich panels for roofs. It has tests and criteria for evaluating the results of these tests. As regards durability and performance under the weather, it proposes to choose one of three different climatic cycles. The choice depends on the material of the core. Each climate cycle has assessment criteria to measure whether the cycle has been successfully overcome or not. This assessment is related to the standard EN 14509, paragraph 5.2.3.1 that contains the same climatic test cycles. In this work we subjected several types of non-metallic sandwich panels to this test and criteria. Then, a critical review of these acceptance criteria was done. As a result, some recommendations are proposed regarding the acceptance criteria and testing procedure.
Kerkkänen T and Tiainen T. Durability of different types of sandwich panels under climatic conditions. Report 15/1999, Institute of Materials Science, Tampere University of Technology, Finland, 1999.
3.
ETAG 016-1: Guideline for European Technical Approval of Self-supporting Composite Lightweight Panels. Part one: General. Edition November 2003. European Organisation for Technical Approvals (EOTA).
4.
ETAG 016-2: Guideline for European Technical Approval of Self-supporting Composite Lightweight Panels. Part 2: Specific aspects relating to Self-supporting Composite Lightweight Panels for use in roofs. Edition November 2003. European Organisation for Technical Approvals (EOTA).
5.
EN 14509: 2006. Self-supporting double skin metal faced insulating sandwich panels – Factory made products – Specifications.
6.
prEN 14509: 2002. Self-supporting double skin metal faced insulating sandwich panels – Factory made products – Specification.
7.
MateoRCabreroJCHermosoE. Ageing tests study on wood-based sandwich panels. Mater Construct2011; 61: 583–586.
8.
KojimaYSuzukiS. Evaluation of wood-based panel durability using bending properties after accelerated aging treatments. J Wood Sci2011; 57: 126–133.
9.
KojimaYSuzukiS. Evaluating the durability of wood-based panels using internal bond strength results from accelerated aging treatments. J Wood Sci2011; 57: 7–13.
10.
MousaMAUddinN. Structural behavior and modeling of full-scale composite structural insulated wall panels. J Eng Struct2012; 41: 320–334.
11.
EN 1995-1-1: 2006, Eurocode 5: Design of timber structures – Part 1-1: General – Common rules and rules for buildings.
12.
EN 312: 2010. Particleboards. Specifications.
13.
EN 520: 2004+A1: 2009. Gypsum plasterboards. Definitions, requirements and test methods.
14.
European Convention for Construction Steelwork, TWG 7.9 Sandwich panels and relates structures. European Recommendations for Sandwich Panels. Part I: Design. Brussels: ECCS, 2001. ISBN: 92-9147-000-62. pp.43–44, 66.
