In this work is proposed the application of the ProSim process simulator for the analysis of wine aroma concentration by performing a two-level simulation: First, ProSim is used to attain a preliminary design of a distillation tower, and afterward the simulator is employed to analyze the behavior of the tower in a more precise way. The UNIFAC model was used for nonideal behavior description of the mixtures. In this application, the concentration of a 13-compound mixture was simulated. In fact, the numerical methods implemented in ProSim made it possible to attain the convergence quickly even with minor compounds. The results obtained showed that the use of ProSim results to be very advantageous because it is timesaving and improvements are attained with respect to the specific programs developed by researchers.
BernaA, RossellóC, MuletA (1987). Simulación de la Síntesis del Amoniaco Utilizando el Programa General ProSim. Ing Quim223: 557–562.
2.
BestRJ, BewajiEO, JohnsWR, KassimHO (1994). Steady-state and dynamic simulation of food processes including spatial effects. Food Bioproducts Proc72(C2): 79–85.
3.
DaubasB, PingaudH, KoehretB (1991).Development d'un simulateur de procédés discontinuous, semicontinuous and continuous: ProSim. Recent Prog Genie Procede5(13): 307–12.
4.
EvansLB (1981). Advances in Process Flowsheeting Systems, in Foundations of Computer-Aided Chemical Process Design (MachRSH, SeiderWD, eds.). Vol. I, pp. 425–469. New York: Engineering Foundation.
5.
FranksRGE (1972). Modeling and Simulation in Chemical Engineering.New York: Wiley.
6.
GalbeM, ZacchiG (1992). Simulation of ethanol production processes based on enzymatic hydrolysis of lignocellulosic materials using ASPEN PLUS. Appl Biochem Biotechnol34/35, 93–104.
7.
HimmelblauDM, BischoffKB (1976). Análisis y Simulación de Procesos.Barcelona: Ed. Reverte.
8.
Le LannJM, KoehretB (1987).Transport property prediction for engineering calculations. Proc. 4th Mediterranean Congr. Chem. Eng Barcelona, pp. 538–539.
9.
LoraJ, IborraMI, PérezR, CarbonellI (1992). Simulación del proceso de destilación para la concentración de aromas del vino. Rev Esp Cienc Tecnol Aliment32: 621–633.
10.
MuletA, MuratetG, EnjalbertM (1977). Eficacia de platos de rectificación a reflujo parcial. An Quím73: 1202–1207.
11.
MuletA, BernaA, BaldasanoJM, AucejoA, JouliaX, KoehretB (1986). ProSim: un simulador de procesos para microordenador. Ing Quím211: 163–170.
12.
PérezR, SalvadorMD, MeleroR, NadalMI, GasqueF (1989). Dealcoholization of wine by column distillation. Preliminary studies. Rev Agroquim Tecnol Aliment29: 124–130.
ProSimSA (1993). Manuel Utilisateur.Tolouse: Ecole Nationale Supérieure d'Ingénieurs de Génie Chimique.
15.
RamanR (1985). Chemical Process Computations.London: Elsevier.
16.
ReidRC, PrausnitzJM, PolingBE (1988). Properties of Gases and Liquids, 4th ed.New York: McGraw-Hill.
17.
RichardP, DuranceTD, SandbergGMM (1991). A computer simulation of thermal sterilization of canned foods with sub-freezing initial temperatures. Can Inst Food Sci Technol J24(1/2): 95–98.
18.
RoseLM (1985). Distillation Design in Practice.Amsterdam: Elsevier.
19.
RussellLW (1994). The application of modern process modelling package to CSR refineries. Int Sugar J96(1143): 88–90, 95-98.
SeaderJD (1992). Destilación. En Manual del Ingeniero Químico (PerryRH, GreenDW, MaloneyJO, eds.). Tomo 2, pp. Chapter 13 pp. 1–104. México: McGraw-Hill.
22.
SkjoeldebrandC, OhlssonT (1993a). A computer simulation program for evaluation of continuous heat treatment of particulate foods products: I. Design. J Food Eng20(2): 149–165.
23.
SkjoeldebrandC, OhlssonT (1993b). A Computer simulation program for evaluation of continuous heat treatment of particulate foods products: II. Utilisation. J Food Eng20(2): 167–187.
24.
TalleyPK, BaleCW, WatanasaryS, AnaviS (1993). Process modelling in metallurgy: applications of ASPEN PLUS to metallurgical processes. Chem. Extr. Metall., Proc. Int. Symp., 2nd, pp. 341–352.
