A pure-bending model for thin films, accurate to leading order in film thickness, is rigorously established on the basis of the three-dimensional theory of materially uniform elastic bodies. A model accounting for both stretching and bending is also proposed. This incorporates a natural extension of Koiter’s theory. We show that the classical Kirchhoff–Love hypothesis, to the effect that material lines normal to the film remain so in the course of deformation, is not generally valid.
EpsteinMElzanowskiM (2007) Material Inhomogeneities and their Evolution. Berlin: Springer.
3.
GuptaASteigmannDJStolkenJS (2007) On the evolution of plasticity and incompatibility. Math Mech Solids12: 583–610.
4.
RajagopalKR (2003) Diffusion through polymeric solids undergoing large deformations. Mat Sci Technol19: 1175–1180.
5.
TempletGSteigmannDJ (2013) Diffusion and swelling in finitely deforming elastomers. Math Mech Compl Sys1: 105–128.
6.
RajagopalKSrinivasaA (1998) Inelastic behavior of materials. Part 1: Theoretical underpinnings. Int J Plasticity14: 945.
7.
WangC-C (1967) On the geometric structures of simple bodies, a mathematical foundation for the theory of continuous distributions of dislocations. Arch Rat Mech Anal27, 33–94.
8.
FoxDDRaoultASimoJC (1993) A justification of nonlinear properly invariant plate theories. Arch Rat Mech Anal124: 157–199.
9.
CiarletPG (2005) An introduction to differential geometry with applications to elasticity. J Elasticity78–79: 3–201.
10.
FrieseckeGJamesRDMoraMGMüllerS (2003) Derivation of nonlinear bending theory for shells from three-dimensional elasticity by Gamma-convergence. C R Acad Sci I336: 697–702.
11.
FrieseckeGJamesRDMüllerS (2006) A hierarchy of plate models derived from nonlinear elasticity by gamma-convergence. Arch Rat Mech Anal180: 183–236.
12.
NiordsonFI (ed.) (1968) Proceedings of the IUTAM Symposium on the Theory of Thin Shells, Copenhagen. Berlin: Springer, 1968.
13.
McMahonJGorielyATaborM (2011) Nonlinear morphoelastic plates I: Genesis of residual stress. Math Mech Solids16: 812–832.
14.
McMahonJGorielyATaborM (2011) Nonlinear morphoelastic plates II: Exodus to buckled states. Math Mech Solids16: 833–871.
15.
Ben AmarMDervauxJ (2008) Morphogenesis of growing soft tissues. Phys Rev Lett101: 068101.
16.
EpsteinMde LeónM (2000) Homogeneity without uniformity: toward a mathematical theory of functionally graded materials. Int J Solids and Structures37: 7577–7591.
17.
WangC-CCrossJJ (1977) On the field equations for a smooth, materially uniform, elastic shell. Arch Rat Mech Anal65: 57–72.
18.
EpsteinMde LeónM (1998) On uniformity of shells. Int J Solids and Structures35: 2173–2182.
19.
KoiterWT (1966) On the nonlinear theory of thin elastic shells. Proc Knonklijke Nederlandse Akademie van WetenschappenB69: 1–54.
20.
SfyrisD (2011) The strong ellipticity condition under changes in the current and reference configuration. J Elasticity103: 281–287.
21.
SteigmannDJ (2013) A well-posed finite-strain model for thin elastic sheets with bending stiffness. Math Mech Solids13: 103–112.
22.
SteigmannDJ (2007) Thin-plate theory for large elastic deformations. Int J Non-linear Mech42: 233–240.
23.
LovelockDRundH (1989) Tensors, Differential Forms and Variational Principles. New York: Dover.
24.
SteigmannDJ (2009) A concise derivation of membrane theory from three-dimensional nonlinear elasticity. J Elasticity97: 97–101.
25.
SteigmannDJOgdenRW (2014) Classical plate buckling theory as the small-thickness limit of three-dimensional incremental elasticity. ZAMM94: 7–20.
26.
ParoniRTomasettiG (2014) Buckling of residually stressed plates: an asymptotic approach. Math Mech Solids. DOI: 10.1177/1081286513512148.
27.
CiarletPMardareS (2012) An intrinsic approach and a notion of polyconvexity for nonlinearly elastic plates. C R Acad Sci Paris Ser I350: 111–116.
28.
MiaraBLodsV (1998) Nonlinearly elastic shell models I. The membrane model. Arch Rat Mech Anal142: 331–353.
29.
MiaraB (1998) Nonlinearly elastic shells II. The flexural model. Arch Rat Mech Anal142: 355–374.
30.
CiarletPGRoquefortA (2000) Justification d’un modèle bi-dimensionnel non linéaire de coque analogue à celui de W.T. Koiter. C R Acad Sci I331: 411–416.
31.
CerdaEMahadevanL (2003) Geometry and physics of wrinkling. Phys Rev Lett90: 074302.
32.
PuntelEDeseriLFriedE (2011) Wrinkling of a stretched thin sheet. J Elasticity105: 137–170.
33.
TaylorMBertoldiKSteigmannDJ (2014) Spatial resolution of wrinkle patterns in thin elastic sheets at finite strain. J Mech Phys Solids62: 163–180.
34.
TruesdellCNollW (1965) The Nonlinear Field Theories of Mechanics (S. Flügge’s Handbuch der Physik, Vol. III/3). Berlin: Springer.
