In this paper, a load-sharing performance analysis method of the planetary gear system is proposed considering the coupling effects of double-helical gear and journal bearing. Firstly, the coupling effects between the meshing characteristics of the double-helical gear pair and the dynamic characteristics of journal bearing under the actual operation state are studied, the dynamic model of the double-helical gear planetary transmission system is established, and the load sharing coefficient before and after considering the coupling effects are calculated; secondly, the load sharing characteristic test rig of planetary transmission system is built, and the load sharing coefficient of gear system under the test condition is measured to verify the accuracy of the proposed method; finally, the effects of operating parameters and structural parameters on the load sharing characteristic of gear system are discussed.
Chang-JianCWJianC (2010) Nonlinear analysis for gear pair system supported by long journal bearings under nonlinear suspension. Mechanism and Machine Theory45: 569–583.
2.
DongJXWangQBTangJY, et al. (2021) Dynamic characteristics and load-sharing performance of concentric face gear split-torque transmission systems with time-varying mesh stiffness, flexible supports and deformable shafts. Meccanica56: 2893–2918.
3.
GeHShenYBZhuYQ, et al. (2021) Simulation and experimental test of load-sharing behavior of planetary gear train with flexible ring gear. Journal of Mechanical Science and Technology35(11): 4875–4888.
4.
HuCFGengGDSpanosPD (2021) Stochastic dynamic load-sharing analysis of the closed differential planetary transmission gear system by the Monte Carlo method. Mechanism and Machine Theory165: 104420.
5.
KimJGParkYJLeeSD, et al. (2018) Influence of the carrier pinhole position errors on the load sharing of a planetary gear train. International Journal of Precision Engineering and Manufacturing19(4): 537–543.
6.
LiuZXLiuZSYuXY (2018) Dynamic modeling and response of a spur planetary gear system with journal bearings under gravity effects. Journal of Vibration and Control24(16): 3569–3586.
7.
LiuYHZhenDB ZhangH, et al. (2020) Multi-objective spur gear pair optimization focused on volume and efficiency. Shock Vib2020: 8886066.
8.
LiuXFangZDJiaHT, et al. (2021) Investigation of load sharing and dynamic load characteristics of a split torque transmission system with double-helical gear modification. Shock and Vibration2021: 1–22.
9.
OuZXSongCSZhuC, et al. (2019) Dynamic response analysis for NW planetary gear transmission used in electric wheel hub. IEEE Access7: 111879–111889.
10.
PedreroJIPleguezuelosMSánchezMB (2022) Influence of meshing stiffness on load distribution between planets of planetary gear drives. Mechanism and Machine Theory170: 104718.
11.
RenFQinDLimTC, et al. (2014) Study on dynamic characteristics and load sharing of a herringbone planetary gear with manufacturing errors. International Journal of Precision Engineering and Manufacturing15(9): 1925–1934.
12.
RenFJiJLuoG, et al. (2021) Investigation of dynamic load sharing behavior for herringbone planetary gears considering multicoupling manufacturing errors. Shock and Vibration2021: 1–15.
13.
ShuaiMTingZGuo-guangJ, et al. (2020) Analytical investigation on load sharing characteristics of herringbone planetary gear train with flexible support and floating sun gear. Mechanism and Machine Theory144: 103670.
14.
ShinDPalazzoloA (2020) Nonlinear analysis of a geared rotor system supported by fluid film journal bearings. Journal of Sound and Vibration475: 115269.
15.
TangXLZouLYangW, et al. (2018) Novel mathematical modelling methods of comprehensive mesh stiffness for spur and helical gears. Applied Mathematical Modelling64: 524–540.
16.
TangXLYangKWangH, et al. (2022) Driving environment uncertainty-aware motion planning for autonomous vehicles. Chinese Journal of Mechanical Engineering35: 120.
17.
WangCLWeiJWuZH, et al. (2019) Load sharing performance of herringbone planetary gear system with flexible pin. International Journal of Precision Engineering and Manufacturing20: 2155–2169.
18.
WangSYZhuRFengJ (2020) Study on load sharing behavior of coupling gear-rotor-bearing system of GTF aero-engine based on multi-support of rotors. Mechanism and Machine Theory147: 103764.
19.
XunCDaiH (2021) Dynamic load sharing behaviours of planetary gear trains and parameter study through perturbation analysis. Shock and Vibration2021: 1–24.
20.
YangJYueYJZhuRP, et al. (2020) Dynamic characteristics of encased differential gear train with journal bearing. Mathematical Problems in Engineering2020: 2436191.
21.
YinMHChenGDSuH (2016) Theoretical and experimental studies on dynamics of double-helical gear system supported by journal bearings. Advances in Mechanical Engineering8(5): 168781401664697.
22.
ZhangJQinXPXieCY, et al. (2018) Optimization design on dynamic load sharing performance for an in-wheel motor speed reducer based on genetic algorithm. Mechanism and Machine Theory122: 132–147.
23.
ZhangCPWeiJWangFM, et al. (2020) Dynamic model and load sharing performance of planetary gear system with journal bearing. Mechanism and Machine Theory151: 103898.
