Abstract
There are well-known expressions for natural frequencies and mode shapes of a Euler-Bernoulli beam which has classical boundary conditions, such as free, fixed, and pinned. There are also expressions for particular boundary conditions, such as attached springs and masses. Surprisingly, however, there is not a method to calculate the natural frequencies and mode shapes for a Euler–Bernoulli beam which has any combination of linear boundary conditions. This paper describes a new method to achieve this, by writing the boundary conditions in terms of dynamic stiffness of attached elements. The method is valid for any boundaries provided they are linear, including dissipative boundaries. Ways to overcome numerical issues that can occur when computing higher natural frequencies and mode shapes are also discussed. Some examples are given to illustrate the applicability of the proposed method.
Keywords
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
