The continuum element method for determining natural frequencies and mode shapes of the crankshaft is developed. The crankshaft is modelled into a series of space continuum beam elements. They include the effects of shear deformation and rotary inertia of the cross-section. An analytical expression for the dynamic stiffness matrix for each of the elements is derived. The overall dynamic stiffness matrix of the crankshaft is assembled in turn. The natural frequencies are calculated with the Wittrick—Williams algorithm. The mode shapes of the crankshaft are computed by the recursive Newton method. Two illustrative crankshafts are discussed to evaluate the performance of the method. Solutions calculated by the finite element method and experimental work are also enumerated for comparison. The results show that the current method is appropriate for free vibration analysis of the crankshaft.
RaoD. K.‘Torsional vibration of crankshafts in reciprocating machines.’Shock Vibr. Dig.16 (2) (1984): 14–23
4.
PriebschH. H.AffenzellerJ.GranS.‘Prediction technique for stress and vibration of nonlinear supported, rotating crankshafts.’Trans. ASME, J. Engng Gas Turbines Power115 (4) (1993): 711–720
LeiX. Y.Dynamic modeling of vibration and analysis on crack fault in I.C.E. crankshafts PhD Thesis, Dalian University of Technology, Dalian, People's Republic of China, 2003
7.
MourelatosZ. P.‘An efficient crankshaft dynamic analysis using substructuring with Ritz vectors.’J. Sound Vibr.238 (3) (2000): 495–527
8.
PrakashV.VenkateshD. N.ShrinivasaU.‘The effect of bearing stiffnesses on crankshaft natural frequencies.’ SAE paper 940697, 1994
9.
HariuN.OkadaA.‘A method of predicting and improving NVH and stress in operating crankshaft using nonlinear vibration analysis.’ SAE paper 970502, 1994
10.
RaubJ.JonesJ. D.KleyP.RebbertM.‘Analytical investigation of crankshaft dynamics as a virtual engine module.’ SAE paper 1999–01-1750, 1999
11.
DuH. Y. I.‘Simulation of flexible rotating crankshaft with flexible engine block and hydrodynamic bearings for a V6 engine.’ SAE paper 1999–01-1752, 1999
12.
AthavaleS. M.SajanpawarP. R.‘Analytical studies on influence of crankshaft vibrations on engine noise using integrated parametric finite element model: Quick assessment tool.’ SAE paper 1999–01-1769, 1999
13.
KangY.SheenG. J.TsengM. H.TuS. H.ChiangH. W.‘Modal analyses and experiments for engine crankshafts.’J. Sound Vibr.214 (3) (1998): 413–430
14.
AminudinB. A.OhJ. E.LeeJ. Y.‘Analysis of an in-line engine crankshaft under the firing condition.’Proc. IMechE, Part D: J. Automobile Engineering219 (3) (2005): 345–353
15.
OkamuraH.ShinnoA.YamanakaT.SuzukiA.SogabeK.‘A dynamic stiffness matrix approach to the analysis of three-dimensional vibrations of automobile engine crankshafts: Part 1 — background and application to free vibrations. In Proceedings of the ASME Winter Meeting onVehicle noise, Dallas, Texas, USA,’ 1990 NCA-vol. 9, pp. 47–58 (American Society of Mechanical Engineers, New York).
16.
OkamuraH.ShinnoA.YamanakaT.SuzukiA.SogabeK.‘Simple modeling and analysis for crankshaft three-dimensional vibrations, part 1: Background and application to free vibrations.’Trans. ASME, J. Vibr. Acoustics117 (1) (1995): 70–79
PestelE. C.LeckieF. A.Matrix methods in elastomechanics (New York: McGraw-Hill1963)
22.
WilliamsF. W.WittrickW. H.‘An automatic computational procedure for calculating natural frequencies of skeletal structures.’Int. J. Mech. Sci.12 (9) (1970): 781–791
23.
WittrickW. H.WilliamsF. W.‘A general algorithm for computing natural frequencies of elastic structures.’Q. J. Mechanics Appl. Math.24 (3) (1971): 263–284
24.
YuanS.YeK.WilliamsF. W.KennedyD.‘Recursive second order convergence method for natural frequencies and modes when using dynamic stiffness matrices.’Int. J. Numer. Meth. Engng56 (12) (2003): 1795–1814
25.
YuanS.YeK.WilliamsF. W.‘Second order mode-finding method in dynamic stiffness matrix methods.’J. Sound Vibr.269 (3–5) (2004): 689–708
26.
DjoudiM. S.KennedyD.WilliamsF. W.YuanS.YeK.‘Exact substructuring in recursive Newton's method for solving transcendental eigenproblems.’J. Sound Vibr.280 (3–5) (2005): 883–902
27.
TimoshenkoS.YoungD. H.WeaverW.Vibration problems in engineering, 4th edition (New York: John Wiley1974)
28.
ZhuB. F.The finite element method theory and applications, 2nd edition (Beijing: China WaterPower Press1998)
29.
ChengF. Y.‘Vibrations of Timoshenko beams and frameworks.’J. Struct. Div., ASCE96 (ST3) (1970): 551–571
30.
HowsonW. P.WilliamsF. W.‘Natural frequencies of frames with axially loaded Timoshenko members.’J. Sound Vibr.26 (4) (1973): 503–515
31.
HuangT. C.‘The effect of rotatory inertia and of shear deformation on the frequency and normal mode equations of uniform beams with simple end conditions.’Trans. ASME, J. Appl. Mechanics28 (4) (1961): 579–584
32.
RichardsT. H.LeungY. T.‘An accurate method in structural vibration analysis.’J. Sound Vibr.55 (3) (1977): 363–376
33.
BatheK. J.Finite element procedures (Englewood Cliffs, New Jersey: Prentice-Hall1996)
