The article deals with the effect of stress triaxiality on the inelastic deformation behavior of aluminum alloys. The proposed continuum model takes into account a stress-triaxiality-dependent yield condition as well as a damage criterion with different branches corresponding to various damage modes depending on the stress triaxiality and the Lode parameter. Numerical simulations of experiments with smooth and pre-notched tension and shear specimens are presented covering a wide range of stress triaxialities. Numerical results show good agreement with available experimental data. The analyses allow verification of the macroscopic model and identification of material parameters.
Asaro, R.J. ( 1983). Micromechanics of Crystals and Polycrystals, Advances in Applied Mechanics, 23: 2-115.
2.
Bai, Y. and Wierzbicki, T. ( 2008). A New Model of Metal Plasticity and Fracture with Pressure and Lode Dependence, International Journal of Plasticity, 24: 1071-1096.
3.
Bao, Y. and Wierzbicki, T. ( 2004). On Fracture Locus in the Equivalent Strain and Stress Triaxiality Space, International Journal of Mechanical Science , 46: 81-98.
4.
Bao, Y. and Wierzbicki, T. ( 2005). On the Cut-off Value of Negative Triaxiality for Fracture , Engineering Fracture Mechanics, 72: 1049-1069.
5.
Bonora, N., Gentile, D., Pirondi, A. and Newaz, G. ( 2005). Ductile Damage Evolution under Triaxial State of Stress: Theory and Experiment, International Journal of Plasticity , 21: 981-1007.
6.
Bonora, N., Ruggiero, A., Esposito, L. and Gentile, D. ( 2006). CDM Modeling of Ductile Failure in Ferritic Steels: Assessment of the Geometry Transferability of Model Parameters, International Journal of Plasticity, 22: 2015-2047.
7.
Borvik, T., Hopperstad, O.S. and Berstad, T. ( 2003). On the Influence of Stress Triaxiality and Strain Rate on the Behavior of a Structural Steel. Part II. Numerical Study, European Journal of Mechanics (A/Solids), 22: 15-32.
8.
Borvik, T., Hopperstad, O.S., Dey, S., Pizzinato, E.V., Langseth, M. and Albertini, C. ( 2005). Strength and Ductility of Weldox 460 E Steel at High Strain Rates, Elevated Temperatures and Various Stress Triaxialities, Engineering Fracture Mechanics, 72: 1071-1087.
9.
Brünig, M. ( 1996). Macroscopic Theory and Nonlinear Finite Element Analysis of Micromechanics of Single Crystals at Finite Strains, Computational Mechanics, 18: 471-484.
10.
Brünig, M. ( 1998). Microscopic Modeling of Volume Expansion and Pressure Dependence of Plastic Yielding in Crystalline Solids, Archive of Applied Mechanics, 68: 71-84.
11.
Brünig, M. ( 1999). Numerical Simulation of the Large Elastic-Plastic Deformation Behavior of Hydrostatic Stress-Sensitive Solids, International Journal of Plasticity, 15: 1237-1264.
12.
Brünig, M. ( 2003a). An Anisotropic Ductile Damage Model Based on Irreversible Thermodynamics, International Journal of Plasticity, 19: 1679-1713.
13.
Brünig, M. ( 2003b). Numerical Analysis of Anisotropic Ductile Damage, Computer Methods in Applied Mechanics and Engineering, 192: 2949-2976.
14.
Brünig, M., Chyra, O., Albrecht, D., Driemeier, L. and Alves, M. ( 2008). A Ductile Damage Criterion at Various Stress Triaxialities , International Journal of Plasticity, 24: 1731-1755.
15.
Brünig, M. and Obrecht, H. ( 1998). Finite Elastic-plastic Deformation Behaviour of Crystalline Solids Based on a Non-associated Macroscopic Flow Rule, International Journal of Plasticity, 14: 1189-1208.
16.
Chaboche, J.L. ( 1988a). Continuum Damage Mechanics: Part I - General Concepts , Journal of Applied Mechanics, 55: 59-64.
17.
Chaboche, J.L. ( 1988b). Continuum Damage Mechanics: Part II - Damage Growth, Crack Initiation, and Crack Growth, Journal of Applied Mechanics , 55: 65-72.
18.
Chow, C.L. and Wang, J. ( 1987). An Anisotropic Theory of Continuum Damage Mechanics for Ductile Fracture, Engineering Fracture Mechanics, 27: 547-558.
19.
Driemeier, L., Brünig, M., Micheli, G. and Alves, M. ( 2009). Experiments on Stress-triaxiality Dependence of Material Behavior of Aluminum Alloys (submitted for publication).
20.
Hancock, J.W. and Mackenzie, A.C. ( 1976). On the Mechanisms of Ductile Failure in High-strength Steels Subjected to Multi-axial Stress-states, Journal of the Mechanics and Physics of Solids, 24: 147-169.
21.
Havner, K.S. ( 1992). Finite Plastic Deformations of Crystalline Solids, Cambridge, University Press.
22.
Hayakawa, K., Murakami, S. and Liu, Y. ( 1998). An Irreversible Thermodynamics Theory for Elastic-plastic-damage Materials, European Journal of Mechanics (A/Solids), 17: 13-32.
23.
Krajcinovic, D. ( 1989). Damage Mechanics, Mechanics of Materials , 8: 117-197.
24.
Lemaitre, J. ( 1996). A Course on Damage Mechanics, 2nd edn, Berlin, Springer-Verlag .
25.
Oh, C.K., Kim, Y.J., Park, J.M., Baek, J.H. and Kim, W.S. ( 2007). Development of Stress-modified Fracture Strain for Ductile Failure of API X65 Steel, International Journal of Fracture , 143: 119-133.
26.
Spitzig, W.A. and Richmond, O. ( 1984). The Effect of Pressure on the Flow Stress of Metals, Acta Metallurgica, 32: 457-463.
27.
Spitzig, W.A., Smelser, R.E. and Richmond, O. ( 1988). The Evolution of Damage and Fracture in Iron Compacts with Various Initial Porosities, Acta Metallurgica, 36: 1201-1211.
28.
Tvergaard, V. ( 1990). Material Failure by Void Growth to Coalescence, Advances in Applied Mechanics, 27: 83-151.
