The article deals with the effect of stress triaxiality on the inelastic deformation behavior of aluminum alloys. The proposed continuum model takes into account stress triaxiality dependence of the yield condition as well as of the damage criterion and the fracture condition with different branches corresponding to various damage and failure modes depending on the stress triaxiality and the Lode parameter. Results of numerical cell simulations on the microscale are presented and corresponding identification of micromechanically motivated material parameters is discussed. Furthermore, numerical results of three-dimensional macromechanical finite element analyses are compared with experimental data obtained from smooth and pre-notched tension specimens. The analyses allow verification of the continuum model and identification of further material parameters.
Bai, Y. and Wierzbicki, T. ( 2008). A New Model of Metal Plasticity and Fracture with Pressure and Lode Dependence, International Journal of Plasticity, 24: 1071-1096.
2.
Bao, Y. and Wierzbicki, T. ( 2004). On Fracture Locus in the Equivalent Strain and Stress Triaxiality Space, International Journal of Mechanical Sciences , 46: 81-98.
3.
Bao, Y. and Wierzbicki, T. ( 2005). On the Cut-Off Value of Negative Triaxiality for Fracture , Engineering Fracture Mechanics, 72: 1049-1069.
4.
Becker, R., Smelser, R.E. and Richmond, O. ( 1989). The Effect of Void Shape on the Development of Damage and Fracture in Plane-Strain Tension, Journal of the Mechanics and Physics of Solids, 37: 111-129.
5.
Bonora, N., Gentile, D., Pirondi, A. and Newaz, G. ( 2005). Ductile Damage Evolution Under Triaxial State of Stress: Theory and Experiment, International Journal of Plasticity , 21: 981-1007.
6.
Bonora, N., Ruggiero, A., Esposito, L. and Gentile, D. ( 2006). CDM Modeling of Ductile Failure in Ferritic Steels: Assessment of the Geometry Transferability of Model Parameters, International Journal of Plasticity, 22: 2015-2047.
7.
Borvik, T., Hopperstad, O.S. and Berstad, T. ( 2003). On the Influence of Stress Triaxiality and Strain Rate on the Behavior of a Structural Steel. Part II. Numerical Study, European Journal of Mechanics - A/Solids, 22: 15-32.
8.
Borvik, T., Hopperstad, O.S., Dey, S., Pizzinato, E.V., Langseth, M. and Albertini, C. ( 2005). Strength and Ductility of Weldox 460 E Steel at High Strain Rates, Elevated Temperatures and Various Stress Triaxialities, Engineering Fracture Mechanics, 72: 1071-1087.
9.
Brocks, W., Sun, D.-Z. and Hönig, A. ( 1995). Verification of the Transferability of Micromechanical Parameters by Cell Model Calculations with Visco-Plastic Material, International Journal of Plasticity, 11: 971-989.
10.
Brünig, M. ( 1999). Numerical Simulation of the Large Elastic-Plastic Deformation Behavior of Hydrostatic Stress-Sensitive Solids, International Journal of Plasticity, 15: 1237-1264.
11.
Brünig, M. ( 2003a). An anisotropic Ductile Damage Model Based on Irreversible Thermodynamics, International Journal of Plasticity, 19: 1679-1713.
12.
Brünig, M. ( 2003b). Numerical Analysis of Anisotropic Ductile Damage, Computer Methods in Applied Mechanics and Engineering, 192: 2949-2976.
13.
Brünig, M., Albrecht, D. and Gerke, S. ( 2009). Numerical Analyses of Stress-Triaxiality-Dependent Inelastic Deformation Behaviour of Aluminium Alloys, International Journal of Damage Mechanics, in press.
14.
Brünig, M., Chyra, O., Albrecht, D., Driemeier, L. and Alves, M. ( 2008). A Ductile Damage Criterion at Various Stress Triaxialities , International Journal of Plasticity, 24: 1731-1755.
15.
Chaboche, J.L. ( 1988a). Continuum Damage Mechanics: Part I - General Concepts , Journal of Applied Mechanics, 55: 59-64.
16.
Chaboche, J.L. ( 1988b). Continuum Damage Mechanics: Part II - Damage Growth, Crack Initiation, and Crack Growth, Journal of Applied Mechanics , 55: 65-72.
17.
Chow, C.L. and Wang, J. ( 1987). An Anisotropic Theory of Continuum Damage Mechanics for Ductile Fracture, Engineering Fracture Mechanics, 27: 547-558.
18.
Coppola, T., Cortese, L. and Folgarait, P. ( 2009). The Effect of Stress Invariants on Ductile Fracture Limit in Steels, Engineering Fracture Mechanics, 76: 1288-1302.
19.
Driemeier, L., Brünig, M., Micheli, G. and Alves, M. ( 2010). Experiments on Stress-Triaxiality Dependence of Material Behavior of Aluminum Alloys, Mechanics of Materials, 42: 207-217.
20.
Fabrègue, D. and Pardoen, T. ( 2008). A Constitutive Model for Elasto-Plastic Solids Containing Primary and Secondary Voids, Journal of the Mechanics and Physics of Solids, 56: 719-741.
21.
Gao, X., Zhang, T., Hayden, M. and Roe, C. ( 2009). Effects of the Stress State on Plasticity and Ductile Failure of an Aluminum 5083 Alloy, International Journal of Plasticity, 25: 2366-2382.
22.
Hancock, J.W. and Mackenzie, A.C. ( 1976). On the Mechanisms of Ductile Failure in High-Strength Steels Subjected to Multi-Axial Stress-States, Journal of the Mechanics and Physics of Solids, 24: 147-169.
23.
Hayakawa, K., Murakami, S. and Liu, Y. ( 1998). An Irreversible Thermodynamics Theory for Elastic-Plastic-Damage Materials, European Journal of Mechanics - A/Solids, 17: 13-32.
24.
Johnson, G.R. and Cook, W.H. ( 1985). Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures, and Pressures, Engineering Fracture Mechanics, 21: 31-48.
25.
Lemaitre, J. ( 1996). A Course on Damage Mechanics, 2nd edn, Berlin, Springer-Verlag .
26.
Needleman, A. ( 1972). Void Growth in an Elastic-Plastic Medium, Journal of Applied Mechanics, 39: 964-970.
27.
Oh, C.K., Kim, Y.J., Park, J.M., Baek, J.H. and Kim, W.S. ( 2007). Development of Stress-Modified Fracture Strain for Ductile Failure of API X65 Steel, International Journal of Fracture , 143: 119-133.
28.
Rice, J.R. and Tracey, D.M. ( 1969). On the Ductile Enlargement of Voids in Triaxial Stress Fields, Journal of the Mechanics and Physics of Solids, 17: 210-217.
29.
Spitzig, W.A. and Richmond, O. ( 1984). The Effect of Pressure on the Flow Stress of Metals, Acta Metallurgica, 32: 457-463.
30.
Spitzig, W.A., Smelser, R.E. and Richmond, O. ( 1988). The Evolution of Damage and Fracture in Iron Compacts With Various Initial Porosities, Acta Metallurgica, 36: 1201-1211.
31.
Tvergaard, V. ( 1990). Material Failure by Void Growth to Coalescence, Advances in Applied Mechanics, 27: 83-151.
32.
Tvergaard, V. and Needleman, A. ( 1984). Analysis of Cup-Cone Fracture in a Round Tensile Bar , Acta Metallurgica, 32: 157-169.
