Analytical modeling of the shape memory effect in SMA beams with rectangular cross section under reversed pure bending

Abstract

An analytical model is developed for a prismatic SMA beam with rectangular cross section subjected to alternating bending at temperature below the austenitic transformations. The loading path consists in a loading-unloading cycle under bending and then under reversed bending. Two opposite martensitic variants take place, whose volume fractions evolve linearly with the axial stress. Different Young’s moduli are taken for the austenitic and martensitic phases. As the bending moment is increased, the martensitic transformation starts from the top and bottom and then it extends inwards. If the maximum applied bending moment is large enough, then the complete Martensitic transformation takes place at the upper and lower parts of the cross section. During unloading and the following reversed bending, reorientation of the Martensite variant into the opposite one takes place starting from the boundary between the fully martensitic region and the intermediate transforming region. Special attention is devoted to calculate analytically the axial stress and Martensite variant distributions within the cross section at each stage of the process. A closed form moment-curvature relation is provided for loading and elastic unloading and in integral form for the rest of the process. The approach is then validated by comparison with analytical results available in the literature.