Mechanical frequency up-conversion for sub-resonance,low-frequency vibration harvesting

Abstract

This article presents analysis and model validation of a single cantilever frequency up-conversion mechanism under stochastic excitation when configured as an electromagnetic energy harvester. The results show that the mechanism is able to achieve an increase in the root mean square velocity of the cantilever end when excited at frequencies below the natural frequency of the beam in the range of 3–7 Hz, as compared to a simple cantilever. The maximum observed gains in root mean square velocity from the experiment varied from 69% at a fundamental excitation frequency of 7 Hz to 153% at 3 Hz for cantilevers with natural frequencies in the range of 8.5–13.3 Hz as compared to a simple cantilever device with the same range of natural frequency. Comparison between the experimental and simulation results demonstrates that the mathematical model of the mechanical system is able to predict the response under such excitation conditions with 99% of the points in the parameter space being fitted at the 95% confidence level. Configured as an electromagnetic harvester based on low-frequency vibration, the device has been shown in the experiment to have a potential gain in average power delivery of 91.5% compared to a simple cantilever structure.

Keywords

energy harvesting low frequency frequency up-conversion electromagnetic

Get full access to this article

View all access options for this article.

References

Ashraf

Khir

MHM

Dennis

(2011a) Analysis of frequency up-conversion based vibration energy harvesting. In: IEEE regional symposium on micro and nanoelectronics, Kota Kinabalu, Malaysia, 28–30 September, pp. 305–309. New York: IEEE.

Ashraf

Khir

MHM

Dennis

(2011b) Energy harvesting in a low frequency environment. In: Proceedings of the national postgraduate conference (NPC), Kuala Lumpur, Malaysia, 19–20 September, pp. 1–5. New York: IEEE.

Ballard

Mann

(2012) Experimental study of human walking to running dynamics with applications to energy harvesting. In: ASME 2012 international mechanical engineering congress & exposition, Houston, TX, 12–15 November, pp. 1–7. New York: ASME.

Beeby

Tudor

White

(2006) Energy harvesting vibration sources for microsystems applications. Measurement Science & Technology 17(12): R175–R195.

Blystad

LCJ

Halvorsen

(2011) A piezoelectric energy harvester with a mechanical end stop on one side. Microsystem Technologies 17(4): 505–511.

Edwards

(2014) Multi-parameter Model Validation of an Energy Harvester Frequency Up-conversion Mechanism Under Stochastic Excitation, Procedia Engineering, 87: 763–766.

Edwards

Xie

. (2013) An impact based frequency up-conversion mechanism for low frequency vibration energy harvesting. In: 17th international conference on solid-state sensors, actuators and microsystems, Barcelona, 16–20 June, pp. 1344–1347. New York: IEEE.

Livermore

(2011) Impact-driven, frequency up-converting coupled vibration energy harvesting device for low frequency operation. Smart Materials and Structures 20(4): 045004.

Halvorsen

(2008) Energy harvesters driven by broadband random vibrations. Journal of Microelectromechanical Systems 17(5): 1061–1071.

10.

Kulah

Najafi

(2004) An electromagnetic micro power generator for low-frequency environmental vibrations. In: IEEE 17th international conference on micro electro mechanical systems (MEMS), Maastricht, 25–29 January, pp. 237–240. New York: IEEE.

11.

Kulah

Najafi

(2008) Energy scavenging from low-frequency vibrations by using frequency up-conversion for wireless sensor applications. IEEE Sensors Journal 8(3): 261–268.

12.

Halvorsen

(2012) MEMS electrostatic energy harvesters with end-stop effects. Journal of Micromechanics and Microengineering 22(7): 074013.

13.

Nagurka

Huang

(2006) A mass-spring-damper model of a bouncing ball. International Journal of Engineering Education 22(2): 393–401.

14.

Paez

Swiler

(2009) Probabilistic methods in model validation. In: 27th international modal analysis conference, Orlando, FL, 9–12 February.

15.

Pancharoen

Zhu

Beeby

(2014) A hip implant energy harvester. Journal of Physics Conference Series 557(1): 012038.

16.

Priya

Inman

(2009) Energy Harvesting Technologies. New York: Springer.

17.

Saha

O’Donnell

Wang

. (2008) Electromagnetic generator for harvesting energy from human motion. Sensors and Actuators A: Physical 147(1): 248–253.

18.

Sari

Balkan

Kulah

(2009) An electromagnetic micro power generator for low frequency environmental vibrations based on the frequency up-conversion technique. Journal of Microelectromechanical Systems 19(1): 14–27.

19.

Tang

Xia

(2012) Non-contact frequency-up-conversion energy harvester for durable & broad-band automotive TPMS application. In: IEEE 25th international conference on micro electro mechanical systems (MEMS), Paris, 20 January–2 February, pp. 1273–1276. New York: IEEE.

20.

Van Minh

Hara

Oguchi

. (2013) Lead-free (K, Na)NbO3 based impact type energy harvester integrated with a cylindrical cavity for a metal ball. In: IEEE 26th international conference on micro electro mechanical systems (MEMS), Taipei, Taiwan, 20–14 January, pp. 833–836. New York: IEEE.

21.

Warman

Lumentut

Howard

(2013) Comparative numerical studies of electromechanical finite element vibration power harvester approaches of a piezoelectric unimorph. In: IEEE/ASME international conference on advanced intelligent mechatronics, Besançon, 8–11 July, pp. 748–753. New York: IEEE.

22.

Xie

Edwards

. (2014) Orthogonal experimental design of polydimethylsiloxane curing for the design of low-frequency vibrational energy harvester. Journal of Intelligent Material Systems and Structures 25(18): 2228–2234.