Thermoplastic composites offer the possibility of post processing by re-melting of the polymer, but this can lead to a loss of consolidation. The aim of this study is to investigate and quantify the mechanisms leading to deconsolidation. A model is introduced based on the first law of thermodynamics including the following mechanisms: decompaction of the fibre reinforcement network affected by the stored energy during compaction, void evolution due to the surface tension and the gas expansion, moisture in the polymer, and external pressure. These deconsolidation mechanisms are interdependent and have a significant effect on deconsolidation. The modeling approach predicts the deconsolidated state with good agreement to physical measurements.
LeeW., SpringerG. A., model of the manufacturing process of thermoplastic matrix composites. Journal of Composite Materials, 21(11), (1987) 1017–1055.
2.
ChangI. Y., LeesJ.K., Recent development in thermoplastic composites: A review of matrix systems and processing methods. Journal of Thermoplastic Composite Materials, 1(3), (1988) 277–296.
3.
HouM., YeL., MaiY.W., An experimental study of resistance welding of carbon fibre reinforced polyetherimide (CF Fabric/PEI) composite material. Applied Composite Materials, 6(1), (1996) 35–49.
4.
HenningerF., YeL., FriedrichK., Deconsolidation behaviour of glass fibre-polyamide 12 composites sheet material during post-processing. Plastics Rubber and Composites Processing and Applications, 28(6), (1998) 287–292.
5.
YangF., PitchumaniR., Interlaminar contact development during thermoplastic fusion bonding. Polymer Engineering and Science, 42(2), (2002) 424–438.
6.
SchledjewskiR., LatrilleM., Processing of Unidirectional fibre reinforced tapes - fundamentals on the way to a process simulation tool (ProSimFRT). Composite Science and Technology, 63(14), (2003) 2111–2118.
7.
KhanM.A., SchledjewskiR., Influencing factors for an Online Consolidating Thermoplastic Tape Placement Process. 17thICCM, Edinburgh, (2009).
8.
TierneyJ., GillespieJ.W., Modeling of heat transfer and void dynamics for the thermoplastic composite tow-placement process. Journal of Composite Materials, 37(19), (2003) 1745–1768.
9.
BrzeskiM., SchledjewskiR., Modeling and phenomena investigation of velocity dependent laminate quality for thermoplastic tape placement by means of diode laser heating. 14thECCM, Budapest (2010).
10.
BeehagA., YeL., Role of cooling pressure on interlaminar fracture properties of commingled CF/PEEK composites. Composites, Part A, 27(3), (1996) 175–182.
11.
AgeorgesC., YeL., HouM., Experimental investigation of the resistance welding of thermoplastic-matrix composites. Part II: optimum processing window and mechanical performance. Composite Science and Technology, 60(8), (2000) 1191–1202.
12.
StreetJ.R., FrickeA.L., ReissL.P., Dynamics of Phase Growth in Viscous, Non-Newtonian Liquids. Industrial & Engineering Chemistry Fundamentals, 10(1), (1971) 54–64.
13.
AmonM., DensonC.D., A study of the dynamics of foam growth: Analysis of the growth of closely spaced spherical bubbles, Polymer Engineering and Science, 24(13), (1984) 1026–1034.
14.
RanganathanS., AdvaniS.G., LamontiaM.A., A Non-Isothermal Process Model for Consolidation and Void Reduction during In-Situ Tow Placement of Thermoplastic Composites. Journal of Composite Materials, 29(8), (1995) 1040–1062.
15.
TierneyJ., GillespieJ.W., Modeling of in situ strength development for the thermoplastic composite tow placement process. Journal of Composite Materials, 40 (2006) 1487–1506.
16.
KhanM.A., MitschangP., SchledjewskiR., Tracing the void content development and identification of its effecting parameters during in-situ consolidation of thermoplastic tape material. Polymers and Polymer Composites, 18(1), (2009) 1–15.
17.
YeL., YuM., MaiY.W., Thermal de-consolidation of thermoplastic matrix composites – I. Growth of voids. Composite Science and Technology, 62(16), (2002) 2121–2130.
18.
YuM., YeL., MaiY.W., Thermal de-consolidation of thermoplastic matrix composites – II. …Migration” of voids and …re-consolidation”. Composite Science and Technology, 64(2), (2004) 191–202.
19.
YeL., ChenZ.R., LuM., HouM., De-consolidation and re-consolidation in CF/PPS thermoplastic matrix composites. Composites Part A, 36(7), (2005) 915–922.
20.
WolfrathJ., MichaudV., MånsonJ.A.E., Deconsolidation in glass mat thermoplastics: Influence of the initial fibre /matrix configuration. Composite Science and Technology, 65(10), (2005) 1601–1608.
21.
WolfrathJ., MichaudV., MånsonJ.A.E., Deconsolidation in glass mat thermoplastic composites: Analysis of the mechanism. Composites Part A, 36(12), (2005) 1608–1616.
22.
KellyP.A., BickertonS., A comprehensive filling and tooling force analysis for ridged mould LCM processes. Composites Part A, 40(11), (2009) 1685–1697.
23.
WalbranW.A., VerlyeB., BickertonS., KellyP.A., Prediction and experimental verification of normal stress distributions on mould tools during Liquid Composite Moulding. Composites Part A, 43(1), (2012) 138–149.
24.
GarbassiF., MorraM., OcchielloE., Polymer surfaces – from physics to technology.Chichester: John Wiley and Sons (1994).
25.
MaK.-X., HoC.-H., ZhuF., ChungT.-S., Investigation of surface energy for organic light emitting polymers and indium tin oxide. Thin Solid Films, 371(1), (2000) 140–147.
26.
MenkeT.J., Maßschneidern der Eigenschaften von PolypropenMischungen und Olefincopolymeren.Halle: Martin-Luther-University Halle-Wittenberg (2001).
27.
YangD., XuZ., LiuC., WangL., Experimental study on the surface characteristics of polymer melts. Colloids and Surfaces A, 367, (2010) 174–180.
28.
BaehrH., KabelacS., Thermodynamik, Grundlagen und technische Anwendungen.Berlin Heidelberg: Springer–Verlag (2006).
ArroyoM., Lopez-ManchadoM.A., AvalosF., Crystallization kinetics of polypropylene: II Effect of the addition of short glass fibres. Polymer, 38(22), (1997) 5587–5593.
31.
YenilmezB., SenanM., SozerE.M., Variation of part thickness and compaction pressure in vacuum infusion process. Composite Science and Technology, 69(11), (2009) 1710–1719.
