This article addresses mainly questions about the roles of fluid systems, in particular of digital ones, in an “Industrie 4.0 (I4.0)” environment. There are three roles: the general machines’ subsystems/components’ role in machines of an I4.0 production system, the role of subsystems/components of machines which are produced under I4.0 conditions, and the manufacturing of fluid systems’ components in an I4.0 setting. These roles are discussed and examples of digital hydraulic solutions which fulfill these roles excellently are presented. They feature simplicity and robustness of hardware components and transfer of functionality to software. It is concluded that components and subsystems can support the successful realization of I4.0-type production systems decisively.
BrandstetterRDeubelTScheidlR. Digital hydraulics and Industrie 4.0. In: Proceedings of the seventh workshop on digital fluid power, Linz, Linz Center of Mechatronics GmbH, 26–27 February 2015, pp.191–207.
2.
KotheJMikelsonsLKübertT. Forming the future with Industrie 4.0. In: Proceedings of the ICAFT 2015, Chemnitz, Fraunhofer-Institut für Werkzeugmaschinen und Umformtechnik10–11 November 2015.
3.
KagermannH. (ed.). Umsetzungsempfehlungen für das Zukunftsprojekt Industrie 4.0, acatech. Deutsche Akademie der Technikwissenschaften e.V. (Geschäftsstelle der Plattform Industrie 4.0), Frankfurt am Main, April2013 (plattform-i4.0.de).
4.
Acatech. Industrie 4.0 in zwei Minuten (Internet video) (in German), http://acatech.de/industrie4.0 (accessed 22 January 2015).
5.
LinjamaMLaamanenAVileniusM. Is it time for digital hydraulics? In:Proceedings of the eighth Scandinavian international conference on fluid power, Tampere, Tampere University, 7–9 May 2003, pp.347–366.
6.
NoritsuguT. Development of PWM mode electro-pneumatic servo mechanism, part I: speed control of a pneumatic cylinder. J Fluid Contr1986; 17(1): 65–80.
7.
NoritsuguT. Development of PWM mode electro-pneumatic servo mechanism, part II: position control of a pneumatic cylinder. J Fluid Contr1987; 17(2): 7–28.
8.
AhnKYokotaS. Intelligent switching control of pneumatic actuator using on/off solenoid valves. Mechatronics2005; 15: 683–702.
9.
EndlerLDe NegriVJCastelanEB. Compressed air saving in symmetrical and asymmetrical pneumatic positioning systems. Proc IMechE, Part I: J Systems and Control Engineering2015; 229(10): 957–969.
10.
ScheidlRLinjamaMSchmidtS. Is the future of fluid power digital?Proc IMechE, Part I: J Systems and Control Engineering2012; 226(6): 721–723.
11.
PonceletJV. Cours de mécanique appliquée aux machines Gauthier-Villars, Paris, 1874.
12.
FinkC. Über gebräuchliche Modifikationen des Wattschen Regulators. VDI Z1865; 9: 271–280.
13.
FarcotJ. Le servo-moteur ou moteur asservi. Paris: J. Baudry, 1873.
14.
Flügge-LotzITaylorCF. Synthesis of a nonlinear control system. IRE Trans Autom Control1956; 1: 3–9.
15.
AchtenP. Discussion: is the future of fluid power digital?Proc IMechE, Part I: J Systems and Control Engineering2012; 226(6): 724–727.
16.
LinjamaM. Digital fluid power—state of the art. In: Proceedings of the twelfth Scandinavian international conference on fluid power (SICFP), vol. 2, iss. 4, Tampere, Tampere University, 18–20 May 2011.
17.
PlöckingerAScheidlRHuovaM. Simulation and experimental results of PWM for digital hydraulics. In: Proceedings of the fifth workshop on digital fluid power, Tampere, Tampere University, 24–25 October 2012.
FischerHLaamanenAIso-HeikoA. Digital hydraulics on rails—pilot project of improving reliability on railway rolling stock by utilizing digital valve system. In: Proceedings of the 14th Scandinavian international conference on fluid power (SICFP), Tampere, Tampere University, 20–22 May 2015.
23.
PlöckingerAWinklerBFoschumP. Digital hydraulics for an industrial micro-positioning system. In: Proceedings of the 9th international fluid power conference (IFK), Aachen, Fürdervereinigung Fluidtechnik e. V. 24–26 March 2014.
24.
WinklerBPlöckingerAScheidlR. State of the art in digital valve technology. In: Proceedings of the seventh workshop on digital fluid power, Linz, Linz Center of Mechatronics GmbH, 26–27 February 2015.
BahetiRGillH. Cyber—physical systems. In: SamadTAnnaswamyAN (eds) The impact of control technology (IEEE Control System Society, 2011; 161–166).
28.
WangYVuranMCGoddardS. Cyber-physical systems in industrial process control. ACM SIGBED Rev (Special issue on the RTSS forum on deeply embedded real-time computing) 2008; 5(1): 12, http://www.cs.virginia.edu/sigbed/archives/2008-01/Wang.pdf
29.
BradleyDRussellDFergusonI. The Internet of Things—the future or the end of mechatronics. Mechatronics2015; 27, 57–74.
30.
GradlCPlöckingerAScheidlR. Sensorless position control with a hydraulic stepper drive—concept, compression modeling and experimental investigation. Mechatronics. Epub ahead of print 7 February 2016. DOI: 10.1016/j.mechatronics.2016.01.004.
31.
BuiniHMPeterSGivargisT. Including variability of physical models into the design automation of cyber-physical systems. In: 52nd design automation conference (DAC), June2015, http://dx.doi.org/10.1145/2744769.2744857
32.
LadnerPFalknerJScheidlR. A switching technique for metal cooling. In: Proceedings of the fourth workshop on digital fluid power, Linz, Linz Center of Mechatronics GmbH, 21–22 September 2011, pp.169–182.
33.
LadnerPMairhoferMScheidlR. Method for cooling a metallic strand and switching valve for intermittent opening and closing of a volume flow of a coolant medium. European patent EP 2527061 A1 20121128 (DE), 2011.
34.
WössS. Theoretische Untersuchung über die Temperaturentwicklung beim Puls-weitenmodulierten Kühlen in Stranggussanlagen. Master’s Thesis, Johannes Kepler University Linz, Linz, 2012.
35.
StellnbergerR. Automatische Fehlererkennung in einem Puls-weitenmodulierten Sekundärkühlsystem für Stranggußanlagen. Master’s Thesis, Johannes Kepler University Linz, Linz, 2013.
