The interest in pullulan produced from industrial wastes has substantially increased due to its industrial applications. The major constraint in pullulan production is expensive and low yield. In this study, attempts were made on the evaluation of media components for maximum pullulan production from Aureobasidium pullulans MTCC 1991 using cassava waste in solid-state fermentation. A statistical approach was scrutinized to evaluate the effects of yeast extract, K2HPO4, (NH4)2SO4, MgSO4⋅7H2O, and NaCl on pullulan production. The optimal conditions eliciting the maximum pullulan yield (6.45 g pullulan/L of culture broth) were found to be 0.6 g/L yeast extract, 3 g/L K2HPO4, 0.2 g/L (NH4)2SO4, 0.3 g/L MgSO4⋅7H2O, and 1 g/L NaCl. The produced pullulan was extracted using the solvent precipitation method and characterized by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy spectroscopic analysis that confirmed pullulan with linear α (1–6) linkage. The results revealed that cassava waste could be used as an effective carbon source for the production of pullulan.
ChiZWangFChiZ, et al.
Bioproducts from Aureobasidium pullulans, a biotechnologically important yeast. Appl Microbiol Biotechnol2009;
82: 793–804.
3.
GaurRSinghRGuptaM, et al.
Aureobasidium pullulans, an economically important polymorphic yeast with special reference to pullulan. Afr J Biotechnol2010;
9: 7989–7997.
4.
ChengKCDemirciACatchmarkJM.Evaluation of medium composition and fermentation parameters on pullulan production by Aureobasidium pullulans. Food Sci Technol Int2011;
17: 99–109.
5.
LeeJHKimJHZhuIH, et al.
Optimization of conditions for the production of pullulan and high molecular weight pullulan by Aureobasidium pullulans. Biotechnol Lett2001;
23: 817–820.
6.
NicolausBKambourovaMToksoyOnerE.Exopolysaccharides from extremophiles: from fundamentals to biotechnology. Environ Technol2010;
31: 1145–1158.
7.
SinghRSSainiGKKennedyJF.Pullulan: microbial sources, production and applications. Carbohydr Polym2008;
73: 515–531.
8.
SinghRSKaurN.Biochemical and molecular characterization of a new pullulan producer Rhodosporidium paludigenum PUPY-06. J Appl Biol Biotechnol2018;
6: 28–37.
9.
LeathersTD.Biotechnological production and applications of pullulan. Appl Microbiol Biotechnol2003;
62: 468–473.
10.
SinghRSKaurNSharmaR, et al.
Carbamoylethyl pullulan: QbD based synthesis, characterization and corneal wound healing potential. Int J Biol Macromol2018;
118: 2245–2255.
11.
TabasumSNoreenAMaqsoodMF, et al.
A review on versatile applications of blends and composites of pullulan with natural and synthetic polymers. Int J Biol Macromol2018;
120: 603–632.
12.
SinghRSKaurNKennedyJF.Pullulan and pullulan derivatives as promising biomolecules for drug and gene targeting. Carbohydr Polym2015;
123: 190–207.
13.
SinghRSKaurNRanaV, et al.
Pullulan: a novel molecule for biomedical applications. Carbohydr Polym2017;
171: 102–121.
14.
ShingelKI.Current knowledge on biosynthesis, biological activity and chemical modification of the exopolysaccharide, pullulan. Carbohydr Res2004;
339: 447–460.
15.
SadhPKDuhanSDuhanJS.Agro-industrial wastes and their utilization using solid state fermentation: a review. Bioresour Bioprocess2018;
5: 15.
16.
OlukanniDOlatunjiT.Cassava waste management and biogas generation potential in selected local government areas in Ogun State, Nigeria. Recycling2018;
3: 58.
17.
TonukariNJEzedomTEnumaCC, et al.
White gold: cassava as an industrial base. Am J Plant Sci2015;
6: 972–979.
18.
SrivasTAnatharamanM.Cassava marketing system in India. Technical bulletin series no. 43.
Thiruvananthapuram, India:
Central Tuber Crops Research Institute, 2005.
19.
GoksungurYUzunogullariPDagbagliS.Optimization of pullulan production from hydrolysed potato starch waste by response surface methodology. Carbohydr Polym2011;
83: 1330–1337.
20.
ThirumavalavanKManikkadanTRDhanasekarR.Pullulan production from coconut by-products by Aureobasidium pullulans. Afr J Biotechnol2009;
8: 255–258.
21.
GanduriVSRaoKRSPodaS.Production of pullulan using jaggery as substrate by Aureobasidium pullulans MTCC 2195. Curr Trends Biotechnol Pharm2016;
10: 296–300.
22.
SharmaNPrasadGSChoudhuryAR.Utilization of corn steep liquor for biosynthesis of pullulan, an important exopolysaccharide. Carbohydr Polym2013;
93: 95–101.
23.
SenaRFCostelliMCGibsonLH, et al.
Enhanced production of pullulan by two strains of A. pullulans with different concentrations of soybean oil in sucrose solution in batch fermentations. Braz J Chem Eng2006;
23: 507–515.
24.
ChiZZhaoS.Optimization of medium and cultivation conditions for pullulan production by a new pullulan-producing yeast strain. Enzyme Microb Technol2003;
33: 206–211.
25.
GoksungurYUcanAGuvencU.Production of pullulan from beet molasses and synthetic medium by Aureobasidium pullulans. Turk J Biol2004;
28: 23–30.
26.
SeoHPSonCWChungCH, et al.
Production of high molecular weight pullulan by Aureobasidium pullulans HP-2001 with soybean pomace as a nitrogen source. Bioresour Technol2004;
95: 293–299.
27.
HafezAMAAbdelhadyHMSharafMS, et al.
Bioconversion of various industrial by-products and agricultural wastes into pullulan. J Appl Sci Res2007;
3: 1416–1425.
28.
SugumaranKRGowthamiESwathiB, et al.
Production of pullulan by Aureobasidium pullulans from Asian palm kernel: a novel substrate. Carbohydr Polym2013;
92: 697–703.
29.
VivekNPandeyABinodP.An efficient aqueous two phase systems using dual inorganic electrolytes to separate 1, 3-propanediol from the fermented broth. Bioresour Technol2018;
254: 239–246.
30.
KachhawaDKBhattacharjeePSinghalRS.Studies on downstream processing of pullulan. Carbohydr Polym2003;
52: 25–28.
31.
MishraBVuppuS.A study on downstream processing for the production of pullulan by Aureobasidium pullulans-SB-01 from the fermentation broth. Res J Recent Sci2013;
2: 16–19.
32.
MillerGL.Use of dinitrosalicylic acid reagent for determination of reducing sugar. Anal Chem1959;
31: 426–428.
33.
MontgomeryDC.Design and analysis of experiments.
New York, NY:
Wiley and Sons, 2017.
34.
GalbraithSCBhatiaHLiuH, et al.
Media formulation optimization: current and future opportunities. Curr Opin Chem Eng2018;
22: 42–47.
35.
AntonyJ.Design of experiments for engineers and scientists.
Burlington, MA:
Elsevier, 2003.
36.
KacurakovaMCapekPSasinkovaV, et al.
FT-IR study of plant cell wall model compounds: pectic polysaccharides and hemicelluloses. Carbohydr Polym2000;
43: 195–203.
37.
MehtaAPrasadGSChoudhuryAR.Cost effective production of pullulan from agri-industrial residues using response surface methodology. Int J Biol Macromol2014;
64: 252–256.
38.
PadmanabanSBalajiNMuthukumaranC, et al.
Statistical optimization of process parameters for exopolysaccharide production by Aureobasidium pullulans using sweet potato based medium. 3 Biotech2015;
5: 1067–1073.
39.
CordovaVLGCordovaVAYTaylorKE, et al.
Response surface methodology for optimization of enzyme-catalyzed azo dye decolorization. J Environ Eng2019;
145: 04019013.
40.
MathialaganTViraraghavanT.Biosorption of pentachlorophenol by fungal biomass from aqueous solutions: a factorial design analysis. Environ Technol2005;
26: 571–580.
41.
GarciaGCVidalesCJANapolesAJ, et al.
Optimization of phenol removal using Ti/PbO2 anode with response surface methodology. J Environ Eng2016;
142: 04016004.
42.
ChoudhuryARBhattacharjeePPrasadGS.Development of suitable solvent system for downstream processing of biopolymer pullulan using response surface methodology. Plos One2013;
8: e77071.
43.
GaoWKimYJChungCH, et al.
Optimization of mineral salts in medium for enhanced production of pullulan by Aureobasidium pullulans HP-2001 using an orthogonal array method. Biotechnol Bioproc E2010;
15: 837–845.
44.
SinghRGaurRBansalS, et al.
Production of pullulan from a high yielding strain of Aureobasidium pullulans in non-stirred flask-type fermentation system. J Microbiol Biotech Res2017;
7: 26–32.
45.
GaoWChungCLiJ, et al.
Application of statistical experimental design for optimization of physiological factors and their influences on production of pullulan by Aureobasidium pullulans HP-2001 using an orthogonal array method. Korean J Chem Eng2011;
28: 2184–2189.
46.
YuXWangYWeiG, et al.
Media optimization for elevated molecular weight and mass production of pigment-free pullulan. Carbohydr Polym2012;
89: 928–934.
47.
SugumaranKRJothiPPonnusamiV.Bioconversion of industrial solid waste: cassava bagasse for pullulan production in solid state fermentation. Carbohydr Polym2014;
99: 22–30.
48.
CastellaneTCLOtoboniALemosE.Characterization of exopolysaccharides produced by Rhizobia species. Rev Bras Ciênc Solo2015;
39: 1566–1575.
