Effects of struts profiles and skewed angles on the aerodynamic performance of gas turbine exhaust diffuser

Abstract

The strut structure directly affects the flow field characteristics and aerodynamic performance of the gas turbine exhaust diffuser. The effects of the strut profiles and strut skewed angles on the aerodynamic performance of the exhaust diffuser at different inlet pre-swirls were numerically investigated using three-dimensional Reynolds-Averaged Navier-Stokes(RANS) and Realizable k-ε turbulence model. The numerical static pressure recovery coefficient of the exhaust diffuser is in agreement with the experimental data well. The reliability of the numerical method for the exhaust diffuser performance analysis was demonstrated. Exhaust diffusers with four kinds of vertical strut profiles obtain the highest static pressure recovery coefficient at the inlet pre-swirl of 0.35. The similar static pressure recovery coefficient of exhaust diffusers with four kinds of vertical strut airfoils are observed when the inlet pre-swirl is less than 0.48. The static pressure recovery coefficient of exhaust diffusers with vertical b1 and b2 struts are higher than that with the a1 and a2 struts when the inlet pre-swirl is greater than 0.48. At the inlet pre-swirl of 0.35, The static pressure recovery coefficient of the exhaust diffuser with the a1 strut decreases with the increasing of the strut skewed angles. The static pressure recovery coefficient of the exhaust diffuser with the b1 strut increases with the increasing of the strut skewed angles, and the static pressure recovery coefficient increases by 3.6% compared with the vertical design when the skewed angle of b1 strut is 40 $°$ . At the inlet pre-swirl of 0.64. The static pressure recovery coefficient of the exhaust diffuser with the a1 strut increases by 8.7% compared with the vertical design when the skewed angle of a1 strut is greater than 20^°. In addition, the static pressure recovery coefficient of the exhaust diffuser with the b1 strut decreases by 3.8% compared with the vertical design when the skewed angle of b1 strut is 40^°. The method to improve the aerodynamic performance of the exhaust diffuser by appropriate increase the strut maximum thickness and design the strut skewed angle is proposed in this work.