This work targets the development of the multidisciplinary design for centrifugal fans, based on the calculation of the fan performance following changes in the fan structure and manufacture. A parametric method that starts from the blade number and manufacturing parameters is first developed to control the shape of fan assembly and its fluid domain. The parametric code, and the aerodynamic and structure analysing codes are then integrated, from the solution of which algorithms are developed to calculate the fan indexes including the flow rate, pressure rise, fan efficiency, fan strength, and the motor power. Validation of the proposed method is performed by the comparison with an experimental test. An orthogonal sampling opens out relevant changes of the fan working performance with respect to the blade number and manufacturing parameters. Results suggest ranges for the blade number and manufacturing parameters that have a sound performance and structure safety when converting the motor power to airflow.
ByrneJCardiffPBrabazonA, et al.
Evolving parametric aircraft models for design exploration and optimisation. Neurocomputing2014;
142: 39–47.
2.
CuiDFengGZhouP, et al.
Parametric design-based multi-objective optimisation for high-pressure turbine disc. Int J Prod Res2017;
55: 4847–4861.
3.
ParkHSDangXP.
Structural optimization based on CAD–CAE integration and metamodeling techniques. Comput-Aided Des2010;
42: 889–902.
4.
PengLLiuLLongT, et al.
An efficient truss structure optimization framework based on CAD/CAE integration and sequential radial basis function meta model. Struct Multidisc Optim2014;
50: 329–346.
5.
SundenBLuoLWangS.
Optimization of the blade profile and cooling structure in a gas turbine stage considering both the aerodynamics and heat transfer. Heat Trans Res2015;
46: 599–629.
6.
RancourtDBolduc-TeasdaleFBouchardED, et al.
Design space exploration of gyrocopter-type airborne wind turbines. Wind Energ2016;
19: 895–909.
7.
ZhangMGouWLiL, et al.
Multidisciplinary design and optimization of the twin-web turbine disk. Struct Multidisc Optim2016;
53: 1129–1141.
8.
Proietti D, Pranzitelli A, Andrews GE, et al. Multi-objective CFD optimisation of shaped hole film cooling with mesh morphing. In: ASME Turbine Technical Conference and Exposition, Montreal, Quebec, Canada, 15–19 June 2015. New York: ASME, pp. 42–49.
9.
LiLJiaoJSunS, et al.
Aerodynamic shape optimization of a single turbine stage based on parameterized free-form deformation with mapping design parameters. Energy2019;
169: 444–455.
10.
ZhangMGouWLiL, et al.
Multidisciplinary design and multi-objective optimization on guide fins of twin-web disk using Kriging surrogate model. Struct Multidisc Optim2017;
55: 361–373.
11.
JafariSNikolaidisT.
Meta-heuristic global optimization algorithms for aircraft engines modelling and controller design; a review, research challenges, and exploring the future. Prog Aerosp2019;
104: 40–53.
12.
CorsiniADelibraGSheardAG.
A critical review of computational methods and their application in industrial fan design. ISRN Mech Eng2013;
2013: 1–20.
13.
ZhangMJPomfretMJWongCM.
Three-dimensional viscous flow simulation in a backswept centrifugal impeller at the design point. Comput Fluids1996;
25: 497–507.
14.
KimSJSungHJWallinS, et al.
Design of the centrifugal fan of a belt-driven starter generator with reduced flow noise. Int J Heat Fluid Flow2019;
76: 72–84.
15.
ZhouSLiY.
Volute characteristics of centrifugal fan based on dynamic moment correction method. Proc IMechE, Part A: J Power and Energy2019;
233: 176–185.
16.
KimJ-HChaK-HKimK-Y, et al.
Numerical investigation on aerodynamic performance of a centrifugal fan with splitter blades. Int J Fluid Mach Syst2012;
5: 168–173.
17.
AyadAFAbdallaHMAlyAA.
Effect of semi-open impeller side clearance on the centrifugal pump performance using CFD. Aerosp Sci Technol2015;
47: 247–255.
18.
KaranthKVSharmaNY.
CFD analysis on the effect of radial gap on impeller-diffuser flow interaction as well as on the flow characteristics of a centrifugal fan. Int J Rotat Mach2009;
2009: 1–8.
19.
YuZLiSHeW, et al.
Numerical simulation of flow field for a whole centrifugal fan and analysis of the effects of blade inlet angle and impeller gap. HVAC&R Res2005;
11: 263–283.
20.
EnginTGurMScholzR.
Effects of tip clearance and impeller geometry on the performance of semi-open ceramic centrifugal fan impellers at elevated temperatures. Exp Therm Fluid Sci2006;
30: 565–577.
21.
LeeYT.
Impact of fan gap flow on the centrifugal impeller aerodynamics. J Fluid Eng2010;
132: 1–7.
22.
LiCWangSLJiaY.
The performance of a centrifugal fan with enlarged impeller. Energy Convers Manag2011;
52: 2902–2910.
23.
SonPNKimJWByunSM, et al.
Effects of inlet radius and bell mouth radius and flow rate and sound quality of centrifugal blower. J Mech Sci Technol2012;
26: 1531–1538.
24.
WuYHuangD.
Optimization design of axial fan blade. J Chin Inst Eng2019;
42: 473–478.
25.
LeeYTLimHC.
Performance assessment of various fan ribs inside a centrifugal blower. Energy2016;
94: 609–622.
26.
HeXZhengX.
Performance improvement of transonic centrifugal compressors by optimization of complex three-dimensional features. Proc IMechE, Part G: J Aerospace Engineering2017;
231: 723–738.
27.
HeoM-WKimJ-HSeoT-W, et al.
Aerodynamic and aeroacoustic optimization for design of a forward-curved blades centrifugal fan. Proc IMechE, Part A: J Power and Energy2016;
230: 154–174.
28.
Editorial Committee of China Aeronautical Materials Handbook. China aeronautical materials handbook. 2nd ed.
Beijing:
China Standard Press, 2001,
vol. 1, pp. 437, 554.
29.
AndersonJD. Computational fluid dynamics. 1st ed.
New York:
McGraw-Hill Inc, 1995,
chap. 2, p. 37.
