This paper investigates a vibratory system that employs Hertzian contact theory in terms of free vibration. Nonlinear impact dampers are created by using a spring, mass, and viscous damper model. The model is simulated in MATLAB software using the DAS method as a proper simulation framework. The Taguchi method is used to examine the efficacy of impact dampers for controlling structural vibrations of the structure. It is demonstrated that the optimal factors obtained can effectively suppress the structure’s unwanted vibrations. The analysis of variance is also used to indicate the most influential factor of dampers to demonstrate their ability to quench vibrations.
SongYHeWHeX, et al. Vibration control of a high-rise building structure: theory and experiment. IEEE/CAA J Automatica Sinica2021; 8(4): 866–875.
2.
SaeedMUSunZEliasS. Research developments in adaptive intelligent vibration control of smart civil structures. J Low Freq Noise, Vibration Active Cont2021; 41: 14613484211032758.
3.
DimentbergMFIourtchenkoDV. Random vibrations with impacts: a review. Nonlinear Dyn2004; 36(2): 229–254. DOI: 10.1023/B:NODY.0000045510.93602.ca.
4.
KavyashreeBPatilSRaoVS. Review on vibration control in tall buildings: from the perspective of devices and applications. Int J Dyn Control2021; 9(3): 1316–1331.
5.
FriisTKatsanosEISaberiM, et al.Two-level friction damping and its application for passive multi-functional vibration control of high-rise buildings. Eng Structures2021; 239: 112310.
6.
ShiXZhaoFYanZ, et al.High-performance vibration isolation technique using passive negative stiffness and semiactive damping. Comput-Aided Civ Infrastruct Eng2021; 36: 1034–1055.
7.
Rodriguez-TorresAMorales-ValdezJYuW. Alternative tuning method for proportional-derived gains for active vibration control in a building structure. Trans Inst Meas Control2021; ■■■: 01423312211021052. DOI: 10.1177/01423312211021052.
8.
FreyerBHTheronNJHeynsPS, et al.Self-sensing active control of emulated tangential tool vibration hardware-in-the-loop. Control Eng Pract2021; 109: 104729.
9.
SanoTShiraiKYoshidaO, et al.Assessment of a seismic tuned mass damper with friction fail-safe mechanism for the vibration control of high-rise buildings. Struct Control Health Monit2021; 2812: e2831, DOI: 10.1002/stc.2831https://doi.org/10.1002/stc.2831.
10.
Dehghan-NiriEZahraiSMRodAF. Numerical studies of the conventional impact damper with discrete frequency optimization and uncertainty considerations. Scientia Iranica2012; 19(2): 166–178. DOI: 10.1016/j.scient.2012.01.001.
11.
DuncanMRWassgrenCRKrousgrillCM. The damping performance of a single particle impact damper. J Sound Vibration2005; 286(1–2): 123–144. DOI: 10.1016/j.jsv.2004.09.028.
12.
IbrahimRA. Vibro-impact dynamics : modeling, mapping and applications (Lecture notes in applied and computational mechanics, no. 43). Berlin, Germany: Springer Verlag, 2009, p. xi297.
13.
PopplewellNLiaoM. A simple design procedure for optimum impact dampers. J Sound Vibration1991; 146(3): 519–526. DOI: 10.1016/0022-460X(91)90707-Q.
Blazejczyk-OkolewskaB. Analysis of an impact damper of vibrations. Chaos, Solitons & Fractals2001; 12(11): 1983–1988. DOI: 10.1016/S0960-0779(00)00146-6.
17.
AfsharfardAKolahanF. Reliability-based design for damping behavior of inner mass single unit impact dampers. Qual and Reliability Eng Int2012; 29: 521–527. DOI: 10.1002/qre.1400.
18.
AfsharfardAFarshidianfarA. An efficient method to solve the strongly coupled nonlinear differential equations of impact dampers. Arch Appl Mech2011; 82: 977–984. DOI: 10.1007/s00419-011-0605-1.
19.
DasSChakrabortyA. Optimal design of MRTLCD for semi-active vibration control of building structures using genetic algorithm. In: DuttaSInanEDwivedySK (eds). Advances in rotor dynamics, control, and structural health monitoring. Singapore: Springer Singapore, 2020, pp. 615–625.
20.
GoharimaneshMAkbariA. Optimum parameters of nonlinear integrator using design of experiments based on Taguchi method. J Comput Appl Mech2015; 46(2): 233–241.
21.
GoharimaneshMAkbariATootoonchiAA. More efficiency in fuel consumption using gearbox optimization based on Taguchi method. J Ind Eng Int2014; 10(2): 1–8.
22.
TaguchiG. Introduction to quality engineering: designing quality into products and processes. Tokyo, China: The Organization, 1986.
23.
GoldsmithW. Impact: the theory and physical behaviour of colliding solids. Mineola, NY: Dover Publications, 2002, p. 379., pp. xxv,
24.
TaguchiGTungLWClausingD. System of experimental design: engineering methods to optimize quality and minimize costs. UNIPUB/Kraus International Publications, 1987.
25.
TaguchiGElsayedEAHsiangTC. Quality engineering in production systems. New York, NY: McGraw-Hill College, 1989.
26.
OttoKNAntonssonEK. Extensions to the Taguchi method of product design. Trans. Am. Soc. Mec Des1993; 115: 5–5.
