Simulation and analysis of flow around tilting asymmetric ducted fans mounted at the wing tips of a vertical take-off and landing unmanned aerial vehicle

Abstract

Tilting ducted fans attached to the wing tips of vertical take-off and landing unmanned aerial vehicles define new applications for these types of aerial vehicles. This new configuration gives vertical take-off and landing unmanned aerial vehicles the ability to hover like helicopters and fly forward like airplanes, which results in using any arbitrary location for take-off and landing combined with increasing range and speed. Furthermore, generating additional lift using asymmetrical shape for the external body of the ducted fans can lead to reducing the wing area and related overall drag, which results in saving more energy. This research provides experimental results from wind tunnel tests in addition to computational fluid dynamics simulations to investigate the advantages of using an asymmetrical tilting ducted fan instead of a symmetrical one. “actuator disk model” combined with the assumption of “constant delivered power” to the propeller were used successfully to calculate the induced velocity to the rotor plane of the ducted fan in the computational fluid dynamics simulations. The effects of the stall and flow separation on the aerodynamic coefficients were also studied and compared for the symmetrical and asymmetrical ducted fans. Both computational fluid dynamics and experimental results showed noticeable improvement in the lift coefficient using an asymmetrical shape for the external body of the tilting ducted fans.

Keywords

Tilting ducted fan vertical take-off and landing unmanned aerial vehicle computational fluid dynamics modeling

Get full access to this article

View all access options for this article.

References

McCormick

. Aerodynamics of V/STOL flight, Mineola, NY: Dover Publications, 1999.

Gress Gary R. Lift fans as gyroscopes for controlling compact VTOL air vehicles: Overview and Development Status of Oblique Active Tilting. In: 63rd Annual forum of the American Helicopter Society, Virginia Beach, VA, 1–3 May 2007.

Martin P and Tung C. Performance and flowfield measurements on a 10-inch ducted rotor VTOL UAV. In: 60th Annual forum of the American Helicopter Society, Baltimore, MD, 7–10 June 2004.

Fleming J, Jones T, Gelhausen P, et al. Improving Control System Effectiveness for Ducted Fan VTOL UAVs Operating in Crosswinds. In: 2nd AIAA unmanned unlimited systems, technologies, and operations-aerospace, San Diego, CA, 15–18 September 2003.

Graf W, Fleming J and Wing N. Improving ducted fan UAV aerodynamics in forward flight. In: 46th AIAA aerospace sciences meeting and exhibit, Reno, NV, 7–10 January 2008.

Akturk A, Shavalikul A and Camci C. PIV measurements and computational study of a 5-inch ducted fan for V/STOL UAV applications. In: 47th AIAA aerospace sciences meeting and exhibit, Orlando, FL, 5–8 January 2009.

Camci C and Akturk A. Double ducted fan. A technology description document, The Pennsylvania State University, USA, 2010.

Mort KW and Gamse B. A wind tunnel investigation of a 7-foot diameter ducted propeller. Technical Report NASA TND-4142, NASA, August 1967.

Yaggy PF and Mort KW. A wind-tunnel investigation of a 4-foot-diameter ducted fan mounted on the tip of a semispan wing. Technical Report NASA TND-776, NASA, 1 March 1961.

10.

Mort KW and Yaggy PF. Aerodynamic characteristics of a 4-foot-diameter ducted fan mounted on the tip of a semispan wing. Technical Report NASA TND-1301, NASA, April 1962.

11.

Weir RJ. Aerodynamic design consideration for a free flying ducted propeller. In: AIAA atmospheric flight mechanics conference, Minneapolis, MN, 15–17 August 1988.

12.

Abrego AI and Bulaga RW. Performance study of a ducted fan system. In: AHS aerodynamics, aeroacoustic, test and evaluation technical specialist meeting, San Francisco, CA, January 2002.

13.

Endres

. The illustrated directory of modern commercial aircraft, St. Paul, MN: MBI Publishing Company, 2001.

14.

Leishman

. Principles of helicopter aerodynamics, 2nd ed. London: Cambridge University Press, 2006.

15.

Somers DM and Maughmer MD. Theoretical aerodynamic analyses of six airfoils for use on small wind turbines. Subcontractor Report, Report no. NREL/SR-500-33295, National Renewable Energy Laboratory, June 2003.

16.

ANSYS-Fluent Theory Guide, ANSYS Inc., November 2013.

17.

Ko A, Ohanian OJ and Gelhausen P. Ducted fan UAV modeling and simulation in preliminary design. In: AIAA modeling and simulation technologies conference and exhibit, Hilton Head, SC, 20–23 August 2007.

18.

Pereira JL. Hover and wind tunnel testing of shrouded rotors for improved micro air vehicle design. PhD Dissertation, University of Maryland, USA, 2008.

19.

Taylor

. An introduction to error analysis: the study of uncertainties in physical measurements, 2nd ed. Sausalito, CA: University Science Books, 1997.