A surface reconstruction strategy based on deformable template for repairing damaged turbine blades

Abstract

Recently, rapid repair of damaged blade has become the focus of considerable interest for extending its service life. However, due to the defects caused by high temperature and pressure of operations as well as foreign object impact, the turbine blades often undergo the deviations of the actual part profile from its design model, such that this nominal Computer Aided Design (CAD) model cannot be directly used in the process of repair for tool path generation of laser cladding and Numerical Control (NC) machining, thus to nicely repair the damaged or worn blades, it is necessary to reconstruct the surface model of the actual blade. This paper develops a deformable template-based approach to recovering the surface of blade from the cross-sectional profiles. The mathematical model for cross-sectional profile reconstruction is first established and is then solved by an alternate iteration optimization strategy consisting of registration and deformation of the template curve. Since the proposed method can automatically transform and deform the template curve to best fit the cross-sectional points, the compatibility conditions between different sections are automatically satisfied and there is no need for the data preprocessing such as data sorting, parameterization, etc. which are necessary for the traditional surface fitting methods. Undoubtedly, this considerably simplifies the reconstruction problem of the damaged blade and nicely adapts to blade part-to-part variation. Moreover, a method of closest point computation that combines the arithmetic for Bernstein-form polynomials and Bézier curve subdivision is also given based on bintree decomposition to improve the iteration processes of 2D profile reconstruction. Then, according to these reconstructed sectional profiles, the actual blade surface is reconstructed by surface skinning operations. Finally, the proposed method is tested on a sample blade, and the experimental results show that our method can precisely reconstruct the surface of the damaged blade, especially for the blades with area defects.

Keywords

Turbine blade repair curve/surface reconstruction template curve alternate iteration optimization

Get full access to this article

View all access options for this article.

References

Gao

Folkes

Yilmaz

. Investigation of a 3D non-contact measurement based blade repair integration system. Aircr Eng Aerosp Tec 2005; 77(1): 3–41.

Carter

. Common failures in gas turbine blades. Eng Fail Anal 2005; 12(2): 237–247.

Jones J, McNut P, Tosi R, et al. Remanufacture of turbine blades by laser cladding, machining and in-process scanning in a single machine. In: 23rd annual international solid freeform fabrication symposium, Austin, TX, USA, 2012, pp.821–827.

Yilmaz

Gindy

. A repair and overhaul methodology for aero-engine components. Robot Cim-Int Manuf 2010; 26(2): 190–201.

Delcam to promote adaptive blade repair at TurboExpo. http://www.delcam.com/news/press_article.asp?releaseId=939. Accessed on 27 May 2010.

Bremer C. Automated repair and overhaul of aero-engine and industrial gas turbine components. In: Proceedings of the ASME turbo expo 2005, Reno-Tahoe, Nevada, USA, 2005.

Gao

Chen

Yilmaz

. An integrated adaptive repair solution for complex aerospace components through geometry reconstruction. Int J Adv Manuf Tech 2008; 36(11–12): 1170–1179.

Gao

Chen

Gindy

. An automated GDT inspection system based on non-contact 3D digitization. Int J Prod Res 2006; 44(1): 117–134.

Costa

Vilar

. Laser powder deposition. Rapid Prototyping J 2009; 15(4): 264–279.

10.

Stimper B. Using laser powder cladding to build up worn compressor blade tips. Available at: http://www. mtu.de/en/technologies/engineering_news/production/Stimper_Laser_power_cladding.pdf, 2001.

11.

Bremer C. Adaptive welding strategies for repair and overhall of turbine blades and blisks. In: The 3rd international conference on laser assisted net shape engineering, Erlangen, Germany, 2001.

12.

Dix B. Aerofoil machining and polishing combined into a single automated process. Aircr Eng Aerosp Tec 2004; 76(5).

13.

Zheng

Zhong

Chen

. Worn area modeling for automating the repair of turbine blades. Int J Adv Manuf Tech 2006; 29(4): 1062–1067.

14.

Kruth

. Parameterization of randomly measured points for least squares fitting of B-spline curves and surfaces. Comput Aided Des 1995; 27(9): 663–675.

15.

Piegl

Tiller

. The NURBS book, The 2nd ed. New York: Springer-Verlag, 1997.

16.

Piegl

Tiller

. Parameterization for surface fitting in reverse engineering. Comput Aided Des 2001; 33(8): 593–603.

17.

Pottmann

Leopoldseder

Hofer

. Industrial geometry: recent advances and applications in CAD. Comput Aided Des 2005; 37(7): 751–766.

18.

Sun

Guo

Jia

. B-spline surface reconstruction and direct slicing from point clouds. Int J Adv Manuf Tech 2006; 27(9–10): 918–924.

19.

Lin

Huang

Lai

. Automatic reconstruction of B-spline surfaces with constrained boundaries. Comput Ind Eng 2012; 62(1): 226–244.

20.

OuYang

Feng

. Reconstruction of 2D polygonal curves and 3D triangular surfaces via clustering of Delaunay circles/spheres. Comput Aided Des 2011; 43(8): 839–847.

21.

Li YQ, Huang XP, Gong CH, et al. An engineering rules based parameterization approach for turbine blade reverse engineering. In: Proceedings of the geometric modeling and processing, 2004, pp.311–318.

22.

Mohaghegh

Sadeghi

Abdullah

. Reverse engineering of the turbine blades based on design intent. Int J Adv Manuf Tech 2007(9–101009–1020.

23.

Mohaghegh

Sadeghi

Abdullah

. Improvement of reverse-engineered turbine blades using construction geometry. Int J Adv Manuf Tech 2010; 49(5–8): 675–687.

24.

Bagci

. Reverse engineering applications for recovery of broken or worn parts and re-manufacturing: Three case studies. Adv Eng Softw 2009; 40(6): 407–418.

25.

Georgia

Sotirios

Loannis

. A software tool for parametric design of turbomachinary blades. Adv Eng Softw 2009; 40(1): 41–45.

26.

. Constraints based nonrigid registration for 2D blade for 2d blade profile reconstruction in reverse engineering. J Comput Inf Sci Eng 2009; 9(3): 1–9.

27.

Sun

Wang

Guo

. Machining localization and quality evaluation of parts with sculptured surfaces using SQP method. Int J Adv Manuf Tech 2009; 42(11–12): 1131–1139.

28.

Sun

Guo

. A unified localization approach for machining allowance optimization of complex curved surfaces. Precis Eng 2009; 33(4): 516–523.

29.

Besl

Mckay

. A method for registration of 3D shapes. IEEE T Pattern Anal 1992; 14(2): 239–256.

30.

Wang H, Kearney J and Atkinson K. Robust and efficient computation of the closest point on a spline curve. In: Proceeding of the 5th international conference on curves and surfaces, 2002, 397–406.

31.

Wallner

. A second algorithm for orthogonal projection onto curves and surfaces. Comput Aided Geom D 2005; 22(3): 251–260.

32.

Liu

Lei

Yong

. A torus patch approximation approach for point projection on surfaces. Comput Aided Geom D 2009; 26(5): 593–598.

33.

Hewitt

. Point inversion and projection for NURBS curve and surface: Control polygon approach. Comput Aided Geom D 2003; 20(2): 79–99.

34.

Liu

. Geometric algorithm for point inversion and projection onto Bezier surfaces. Front Comput Sci 2009; 3(4): 472–476.

35.

Berchtold

Bowyer

. Robust arithmetic for multivariate Bernstein-form polynomials. Comput Aided Des 2000; 32(11): 681–689.

36.

Tang

Qin

. Practical methods of optimization, Dalian: Dalian University of Technology Press, 2004.

37.

Arun

Huang

Blostein

. Least-squares fitting of two 3-d point sets. IEEE T Pattern Anal 1987; 9(5): 687–700.