The most recent idea of using the exothermic coating to reduce the drag coefficient on blunt noses in hypersonic flows is numerically simulated to study parametrically the effect of material properties. The conjugate heat transfer is considered by simultaneous solution of flow and solid phase governing equations in numerical procedure. The results show that changing some effective parameters in material properties may increase the coating effectiveness significantly. Using such analysis leads to choose the proper materials for specific flight missions.
MenezesVSaravananSJagadeeshG. Experimental investigations of hypersonic flow over highly blunted cones with aerospikes. AIAA J2003; 41: 1955–1966.
2.
Kurbatskii KA and Montanari F. Application of pressure-based coupled solver to the problem of hypersonic missiles with aerospikes. In: 45th aerospace sciences meeting and exhibit, Nevada, 8–11 January 2007, paper no. AIAA-2007-462.
3.
Srinivasan GR and Chamberlain RR. Drag reduction of spiked missile by heat addition. In: AIAA atmospheric flight mechanics conference, Rhode Island, 16–19 August 2004, paper no. AIAA-2004-4714.
4.
KremeyerKSebastianKShuCW. Computational study of shock mitigation and drag reduction by pulsed energy lines. AIAA J2006; 44: 1720–1731.
5.
CaiCHeX. Energy-deposition/extraction effects on oblique shock waves over a wedge. AIAA J2007; 45: 2267–2272.
6.
VenukumarBJagadeeshGReddyKPJ. Counterflow drag reduction by supersonic jet for a blunt body in hypersonic flow. Phys Fluids2006; 18.
7.
KulkarniVReddyKPJ. Enhancement in counterflow drag reduction by supersonic jet in high enthalpy flows. Phys Fluids2008; 20.
8.
KulkarniVHegdeGMJagadeeshG. Aerodynamic drag reduction by heat addition into the shock layer for a large angle blunt cone in hypersonic flow. Phys Fluids2008; 20.
9.
TahsiniAM. Heat release effects on drag reduction in high speed flows. Int J Heat Mass Transfer2013; 57: 657–661.
10.
KuoKK. Principles of combustion2005. 2nd ed, USA: Wiley and Sons.
HirschC. Numerical computation of internal and external flows, England: Wiley and Sons, 1988.
13.
LiouMS. A sequel to AUSM: AUSM+. J Comput Phys1996; 129: 364–382.
14.
TahsiniAM. Turbulence and additive effects on ignition delay in supersonic combustion. Proc IMechE, Part G: J Aerospace Engineering2013; 227: 93–99.
15.
YuSKennedyIM. A preliminary kinetic model of chromium in a hydrogen/air flame. Combust Sci Technol2000; 160: 35–45.
16.
KashireninovOEFontijnA. Modeling of chromium combustion in incineration: thermochemistry of Cr-C-H-Cl combustion in air and selection of key reactions. Combust Flame1998; 113: 498–506.
17.
YuSJonesADChangDP. The transformation of chromium in a laminar premixed hydrogen-air flame. Twenty seventh symposium on combustion, the combustion institute, 1998, pp.1639–1645. USA: The Combustion Institute.
