This paper shows the importance of modelling the components of the suspension when performing dynamics simulations of a railway vehicle. Focusing on the air spring secondary suspension, a process to define an accurate component model is proposed based on a combination of laboratory tests and model identification techniques. Six models for the air spring secondary suspension are discussed and assessed based on comparison with experiments.
EvansJBergM. Challenges in simulation of rail vehicle dynamics. Veh Syst Dyn2009; 47: 1023–1048.
2.
BruniSVinolasJBergM. Modelling of suspension components in a rail vehicle dynamics context. Veh Syst Dyn2011; 49: 1021–1072.
3.
Bruni S and Mazzola L. State-of-the-art of railway vehicle modelling and validations, Deliverable D5.1, WP5, DynoTRAIN project, http://www.triotrain.eu (December 2010, accessed).
4.
Berg M and Mazzola L. R5.7 – Air spring modelling, WP5, DynoTRAIN project, http://www.triotrain.eu (February 2012, accessed).
5.
Polach O. D5.2 – Assessment of suspension modelling and identification of input parameters, WP5, DynoTRAIN project, http://www.triotrain.eu, (April 2012, accessed).
6.
AlonsoAGiménezJGNietoJVinolasJ. Air suspension characterisation and effectiveness of a variable area orifice. Veh Syst Dyn2010; 48: 271–286.
7.
DocquierNFisettePJeanmartH. Multiphysics modelling of railway vehicles equipped with pneumatic suspensions. Veh Syst Dyn2007; 45: 505–524.
FacchinettiAMazzolaLAlfiSBruniS. Mathematical modelling of the secondary airspring suspension in railway vehicles and its effect on safety and ride comfort. Veh Syst Dyn2010; 48: 429–449.
EickhoffBMEvansJRMinnisAJ. A review of modelling methods for railway vehicle suspension components. Veh Syst Dyn1995; 24: 469–496.
12.
BergM. A three-dimensional airspring model with friction and orifice damping. Veh Syst Dyn2000; 33: 528–539.
13.
Berg M. An airspring model for dynamic analysis of rail vehicles. TRITA-FKT Report 32, 1999. Stockholm, Sweden: Royal Institute of Technology.
14.
Presthus M. Derivation of air spring model parameters for train simulation. Master’s Thesis, Luleå University of Technology, Sweden, 2002.
15.
MatsumiyaSNishiokaSNishimuraSSuzukiM. On the diaphragm air spring “Sumiride”. Sumitomo Search1969; 2: 86–92.
16.
OdaNNishimuraS. Vibration of air suspension bogies and their design. Bull JSME1970; 13: 43–50.
17.
Doquier N. Multiphysics modelling of multibody systems: application to railway pneumatic suspensions. PhD Thesis, Université Catholique de Louvain, Belgium, 2010.
