Extrusion-based additive manufacturing of aluminium-filled ethylene vinyl acetate for electrically conductive 3D part printing

Abstract

Addition of carbon-based fillers to enhance electrical conductivity is quite popular but addition of metal fillers is still a challenge due to oxidation and unavailability of metal nano-powders. In this paper, fabrication of flexible electrically conductive parts is proposed using aluminium metal powder as filler material. Aluminium metal powder is mixed with ethylene vinyl acetate (EVA) by chemical mixing process. Cyclohexane is used as a mixing medium in which EVA is dissolved and aluminium powder is added by weight. An in-house developed material extrusion tool mounted on CNC milling machine is used for printing of flexible electrically conductive samples. Pellet-based extrusion process is used for printing flexible parts as conventional filament-based 3D is not suitable due to buckling. Composite with filler loading in 5%, 10%, 20% and 30% were made and samples were printed. Investigations were made on printability of composite and its electrical conductivity. The aluminium fillers presence and dispersion in polymer were ensured. The samples were printed in temperature range of 130–140 °C through 0.4 mm diameter nozzle. It was found that the resistivity drops by around 60% on varying the filler concentration from 20% to 30%; 81.6 kΩ is the lowest resistance observed with 30% filler concentration. A simulation study on thermal behaviour of material extrusion tool has been done and is validated practically. The application of flexible electrically conductive parts lies in fabrication of various electronic devices like antenna, display boards, solar panels, and wearable health monitoring devices.

Keywords

Extrusion aluminium powder ethylene vinyl acetate (EVA)flexible conductive polymer polymer composite

Get full access to this article

View all access options for this article.

References

Kwok

Goh

KHH

Tan

, et al. Electrically conductive filament for 3D-printed circuits and sensors. Appl Mater Today 2017; 9: 167–175.

Vidakis

Petousis

Mountakis

, et al. On the thermal and mechanical performance of polycarbonate / Titanium nitride nanocomposites in material extrusion additive manufacturing. Compos Part C Open Access 2022; 8: 100291.

Tan

Low

. Embedded electrical tracks in 3D printed objects by fused filament fabrication of highly conductive composites. Addit Manuf 2018; 23: 294–302.

Kim

Cruz

, et al. One-step electrodeposition of copper on conductive 3D printed objects. Addit Manuf 2019; 27: 318–326.

Wang

Liu

. Compatible hybrid 3D printing of metal and nonmetal inks for direct manufacture of end functional devices. Sci China Technol Sci 2014; 57: 2089–2095.

Czyzewski

Burzyński

Gaweł

, et al. Rapid prototyping of electrically conductive components using 3D printing technology. J Mater Process Technol 2009; 209: 5281–5285.

Prathumwan

Subannajui

. Fabrication of a ceramic/metal (Al₂O₃/Al) composite by 3D printing as an advanced refractory with enhanced electrical conductivity. RSC Adv 2020; 10: 32301–32308.

Tan

Hoy

Show

, et al. Single droplet 3D printing of electrically conductive resin using high aspect ratio silver nanowires. Addit Manuf 2021; 48: 102473.

Nurhudan

Supriadi

Whulanza

, et al. Additive manufacturing of metallic based on extrusion process: a review. J Manuf Process 2021; 66: 228–237.

10.

Peng

Vogt

Cakmak

. Complex flow and temperature history during melt extrusion in material extrusion additive manufacturing. Addit Manuf 2018; 22: 197–206.

11.

Kumar

Puneet

, et al. Extrusion-based additive manufacturing process for producing flexible parts. J Brazilian Soc Mech Sci Eng 2018; 40: 1–12.

12.

Valkenaers

Vogeler

Voet

, et al. Screw extrusion based 3D printing, a novel additive manufacturing technology. Coma’13 2013: 235–238.

13.

Laureto

Tomasi

King

, et al. Thermal properties of 3-D printed polylactic acid-metal composites. Prog Addit Manuf 2017; 2: 57–71.

14.

Athukorala

Tran

Balu

, et al. 3D Printable electrically conductive hydrogel scaffolds for biomedical applications: a review. Polymers (Basel) 2021; 13: 1–21.

15.

Montalvo Navarrete

Hidalgo-Salazar

Escobar Nunez

, et al. Thermal and mechanical behavior of biocomposites using additive manufacturing. Int J Interact Des Manuf 2018; 12: 449–458.

16.

Helena

Ramos

Varum

, et al. The use of 3d printing technology for manufacturing metal antennas in the 5 g/iot context. Sensors; 2021; 21(10): 3321.

17.

Shaqour

Abuabiah

Abdel-Fattah

, et al. Gaining a better understanding of the extrusion process in fused filament fabrication 3D printing: a review. Int J Adv Manuf Technol 2021; 114: 1279–1291.

18.

Bhandari

Lopez-Anido

. Discrete-event simulation thermal model for extrusion-based additive manufacturing of pla and abs. Materials (Basel) 2020; 13: 1–21.

19.

Diani

Gall

. Finite strain 3D thermoviscoelastic constitutive model. Society 2006; 46(4): 1–10.

20.

D’Amico

Peterson

. An adaptable FEA simulation of material extrusion additive manufacturing heat transfer in 3D. Addit Manuf 2018; 21: 422–430.

21.

Sharma

Pant

Jain

, et al. Numerical and experimental analysis of heat transfer in inductive conduction based wire metal deposition process. Proc Inst Mech Eng Part C J Mech Eng Sci 2022; 236: 2395–2407.

22.

Bajpai

Jain

. Investigation on using graphite filler for 3D printing of flexible electrically conductive polymer by extrusion-based additive manufacturing. Polym Eng Sci 2023; 64(1): 328–338.