Coir fiber crystallinity is crucial since it widens the range of possible uses for natural fiber. To increase the crystallinity of coir fiber, the study describes an easy-to-use, simple-to-implement method that is cost-effective, eco-friendly, and highly productive. With the help of dodecyl methacrylate disperson, hydrocarbon molecules of varying chain lengths are covalently attached to the surface of coir fibers, modulating their surface wettability. There are a few different long-chain hydrocarbon compounds employed, including n-butyl methacrylate, n-octyl acrylate, and dodecyl methacrylate (DM), but DM has shown to be the most effective. The degree of grafting yield alteration is determined gravimetrically. It has been found that grafting yields of 28–30 wt.% can be used to convert hydrophilic coir fibers into water repellent crystalline fibers (water contact angle 148°). A total of 15 nm of dispersion, a disperson rate of 2 nm/min, DM concentration of 20%, and water content of 10% are fixed as key reaction parameters. Thermal and mechanical analyses show no significant changes in the fiber structure during alteration. The grafting and changes in surface wettability are well supported by the surface morphology of pure and modified coir fiber, which can be seen using scanning electron microscopy.
Hameed KhanHKrishnakumarV.Soil productivity and nutrition. In The coconut palm (Cocos nucifera L.)-research and development perspectives. Singapore: Springer, 2018, pp. 323–442.
NagMKKumarP. Fabrication and characterization of woven and comingled nonwoven sheet polypropylene hybrid composite by recycling and alkali-treated coir waste fibers. Proc IMechE, Part C: J Mech Eng Sci2023; 237: 09544062221149388.
4.
LvCLiuJ. Alkaline degradation of plant fiber reinforcements in geopolymer: a review. Molecules2023; 28: 1868.
5.
PulikkalparambilHVargheseSAChonhenchobV, et al.Recent advances in natural fibers-based materials for food packaging applications. Polymers (Basel)2023; 15: 1393.
6.
NagMKKumarP. Synthesis and characterization of high-performance blended alkali-activated geopolymer (FA/GBFS) from industrial wastes. Iran J Sci Technol Trans Civil Eng2023; 47: 2051–22071.
7.
NamTHOgiharaSTungNH,et al.Effect of alkali treatment on interfacial and mechanical properties of coir fiber reinforced poly (butylene succinate) biodegradable composites. Compos B: Eng2011; 42: 1648–1656.
8.
NagMK. Lifetime estimation and surface degradation of MCCB contact tips due to multiple electrical interruptions. Proc IMechE, Part C: J Mechanical Engineering Science2023: 09544062231185497.
9.
KurienRAAnilMMMohanSS,et al.Natural fiber composites as sustainable resources for emerging applications-a review. Mater Today Proc2023.
10.
AzwaZNYousifBFManaloAC,et al.A review on the degradability of polymeric composites based on natural fibers. Mater Des2013; 47: 424–442.
11.
KumarNM. Material cost optimisation of stored energy mechanism for air circuit breaker. Doctoral dissertation. NIT Jamshedpur.
12.
TranLQFuentesCADupont-GillainC, et al.Wetting analysis and surface characterization of coir fibres used as reinforcement for composites. Colloids Surf, A2011; 377: 251–260.
13.
TayfunÜAkarAÖ, Hac, et al.Performance enhancement of coir fiber-reinforced elastomeric polyurethane eco-composites via theenrichment of fiber surface using sustainable modifications. Green Mater2023; 11: 125–1136.
14.
MartinelliFRRibeiroFRMarvilaMT, et al.A review of the use of coconut fiber in cement composites. Polymers (Basel)2023; 15: 1309.
15.
KumarTSKumarSSKumarLR.Coir fibers, their composites and applications. In Plant fibers, their composites, and applications. Amsterdam, Netherlands: Elsevier, 2022, pp. 253–282.
16.
ChristauSAlyamac-SeydibeyogluEThayerK,et al.Effects of an aqueous surface modification via a grafting-through polymerization approach on the fibrillation and drying of bleached softwood kraft pulp. Cellulose2023; 30: 901–914.
17.
DugvekarMDixitS. Thermal, structural, and morphological examination of mercerized coir fiber–reinforced composites. Proc IMechE Part E: J Process Mech Eng2023; 237: 982–988.
18.
LvNWangXPengS, et al.Study of the kinetics and equilibrium of the adsorption of oils onto hydrophobic coir fiber modified via the sol-gel method. Int J Environ Res Public Health2018; 15: 969.
19.
NagMKShrivastavaA. Characterization and performance evaluation of nylon-66 composite at various composition of carbon fibers and GNP reinforcement. J Reinf Plast Compos2023; 30: 07316844231198923.
20.
NagMKKumarP. Fabrication and characterization of laminated natural fibers and SS303 wire mesh reinforced epoxy-based hybrid composite. Proc IMechE, Part L: J Materials: Design Applications2024; 238: 73–99.
21.
NagMKKumarPNayakS, et al.A comprehensive study on Various factors influences the mechanical behavior of natural fiber-reinforced composite. In International conference on sustainable technologies and advances in automation, aerospace and robotics. Singapore: Springer Nature Singapore, 2023, pp. 471–481.
22.
DhaliKGhasemlouMDaverF, et al.A review of nanocellulose as a new material towards environmental sustainability. Sci Total Environ2021; 775: 145871.
23.
KumarHMishraRKHarmainGA. Effect of mating material on wear behaviour of Ni-based hardface coating. Proc IMechE, Part L: J Materials: Design and Applications2023:14644207231190492.
24.
MishraRKKumarHHarmainGA,et al.Comparative wear behaviour of Ni-Cr-B-Si hardface coatings made by cold metal transfer and plasma transfer Arc welding processes. Proc IMechE, Part L: J Materials: Design Appl2023; 237: 92–106.
25.
Kumar MishraRKumarHHarmainGA,et al.Wear performance of Ni-Cr-B-Si hardface coatings fabricated by cold metal transfer welding. Proc IMechE, Part C: J Mech Eng Sci2022; 236: 1850–1860.
26.
NagMK.Significance of concurrent engineering methods used in automotive industries. IJSREM2023; 7: 1–4.
27.
WimmerRFreyMHausmannM, et al.Plant-Fiber and wood-based functional materials. In Springer handbook of wood science and technology. Cham: Springer, 2023, pp. 1645–1693.
28.
NagMKKumarPPaswanMK.Environmental impacts from the system of solar energy. In Recent advances in power systems: select proceedings of EPREC 2020. Singapore: Springer, 2021, pp. 453–465.
29.
FariaDLMendesLMJuniorJB.Effect of surface treatment on the technological properties of coconut fiber–reinforced plant polyurethane composites. Environ Sci Pollut Res2023; 30: 52124–52140.
30.
VarmaDSVarmaMVarmaIK. Coir fibers: part I: effect of physical and chemical treatments on properties. Text Res J1984; 54: 827–832.
31.
ArrakhizFZEl AchabyMKakouAC, et al.Mechanical properties of high density polyethylene reinforced with chemically modified coir fibers: impact of chemical treatments. Mater Des2012; 37: 379–383.
32.
NagMKKumarP.Optimization of cost and performance of the material used in the mechanism unit of Air Circuit Breaker (ACB) based on various analysis approach. Proc IMechE, Part B: J Eng Manufacture2023: 09544054231168682.
33.
NagMKShrivastavaASolankiK. Active cooling system incorporated in a portable laptop cooling pad. Int J Therm Energy Appl2022; 8: 1–8.
34.
Chimeni-YomeniDFazliADuboisC,et al.Low density polyethylene composites based on flax fibers modified by a combination of coupling agent. Polymer Eng Sci2022; 62: 3553–3565.
35.
MészárosLKaraYFeketeT,et al.Development of self-reinforced low-density polyethylene using γ-irradiation cross-linked polyethylene fibres. Radiat Phys Chem2020; 170: 108655.
36.
ChauhanGSGuleriaLSharmaR. Synthesis, characterization and metal ion sorption studies of graft copolymers of cellulose with glycidyl methacrylate and some comonomers. Cellulose2005; 12: 97–110.
37.
KumarVGulatiKLalS,et al.Effect of gamma irradiation on tensile and thermal properties of poplar wood flour-linear low density polyethylene composites. Radiat Phys Chem2020; 174: 108922.
38.
DasSSinghaAKChaudhuriA, et al.Lengthwise coir fiber properties variation and its effect on coir–polyester composite. J Textile Inst2019; 110: 1695–1702.
39.
CecciRRPassosAAde Aguiar NetoTC,et al.Banana pseudostem fibers characterization and comparison with reported data on coir and coir fibers. SN Appl Sci2020; 2: 20.
40.
ParkESBoxerSG.Origins of the sensitivity of molecular vibrations to electric fields: carbonyl and nitrosyl stretches in model compounds and proteins. J Phys Chem B2002; 106: 5800–5806.
41.
BorovkovVYJiangMFuY.Investigation of copper carbonyl species formed upon CO adsorption on copper-exchanged zeolites by diffuse reflectance FTIR. J Phys Chem B1999; 103: 5010–5019.
42.
AhmedEM. Hydrogel: preparation, characterization, and applications: a review. J Adv Res2015; 6: 105–121.
43.
BaeSEChoSYWonYD, et al.Changes in S-allyl cysteine contents and physicochemical properties of black garlic during heat treatment. LWT-Food Sci Technol2014; 55: 397–402.
44.
PatelJMajiBMoorthyNH,et al.Xanthan gum derivatives: review of synthesis, properties and diverse applications. RSC Adv2020; 10: 27103–27136.
45.
OmidianHZohuriaan-MehrMJBouhendiH. Aqueous solution polymerization of neutralized acrylic acid using na 2 S 2 O 5/(NH 4) 2 S 2 O 8 redox pair system under atmospheric conditions. Int J Polym Mater2003; 52: 307–321.
46.
AshfaqAClochardMCCoqueretX, et al.Polymerization reactions and modifications of polymers by ionizing radiation. Polymers (Basel)2020; 12: 2877.
47.
RosiakJMUlańskiP. Synthesis of hydrogels by irradiation of polymers in aqueous solution. Radiat Phys Chem1999; 55: 139–151.
48.
GuptaBDTyagiPKRayAR,et al.Radiation-induced grafting of 2-hydroxyethyl methacrylate onto polypropylene for biomedical applications. I. Effect of synthesis conditions. J Macromol Sci, Part A: Pure Appl Chem1993; 30: 303–313.
49.
BüchiFNGuptaBHaasO,et al.Study of radiation-grafted FEP-G-polystyrene membranes as polymer electrolytes in fuel cells. Electrochim Acta1995; 40: 345–353.
50.
RätzschMArnoldMBorsigE, et al.Radical reactions on polypropylene in the solid state. Prog Polym Sci2002; 27: 1195–1282.
51.
KiatkamjornwongSMongkolsawatKSonsukM.Synthesis and property characterization of cassava starch grafted poly [acrylamide-co-(maleic acid)] superabsorbent via γ-irradiation. Polymer2002; 43: 3915–3924.
52.
AthawaleVDRathiSC.Graft polymerization: starch as a model substrate. J Macromol Sci1999; 39: 445–480.
53.
XuYBeckerHYuanJ, et al.Double-grafted cylindrical brushes: synthesis and characterization of poly (lauryl methacrylate) brushes. Macromol Chem Phys2007; 208: 1666–1675.
54.
IshiharaK. Revolutionary advances in 2-methacryloyloxyethyl phosphorylcholine polymers as biomaterials. J Biomed Mater Res A2019; 107: 933–943.
55.
MouraEManzoliJEGeraldoAB. Effects of solvent polarity on mutual styrene grafting onto polypropylene by electron beam irradiation. Radiat Phys Chem2012; 81: 1309–1313.
56.
DispenzaCAlessiSSpadaroJ. Radiation processing of polymers in aqueous media. Appl Ionizing Radiat In Mater Process2017; 2: 291–326.
57.
Le CaërS.Water radiolysis: influence of oxide surfaces on H2 production under ionizing radiation. Water (Basel)2011; 3: 235–253.
58.
LiuFLouJHristovD. X-Ray responsive nanoparticles with triggered release of nitrite, a precursor of reactive nitrogen species, for enhanced cancer radiosensitization. Nanoscale2017; 9: 14627–14634.
59.
KaurISharmaNKumariV. Modification of fiber properties through grafting of acrylonitrile to rayon by chemical and radiation methods. J Adv Res2013; 4: 547–557.
60.
DeshmukhRRShettyAR. Comparison of surface energies using various approaches and their suitability. J Appl Polym Sci2008; 107: 3707–3717.
61.
GaurAPSahooSAhmadiM, et al.Surface energy engineering for tunable wettability through controlled synthesis of MoS2. Nano Lett2014; 14: 4314–4321.
62.
ZhaoYPWangY. Fundamentals and applications of electrowetting. Rev Adhesion Adhesives2013; 1: 114–174.
63.
GuptaRKDunderdaleGJEnglandMW,et al.Oil/water separation techniques: a review of recent progresses and future directions. J Mater Chem A2017; 5: 16025–16058.
64.
RasouliSRezaeiNHamediH, et al.Superhydrophobic and superoleophilic membranes for oil-water separation application: a comprehensive review. Mater Des2021; 204: 109599.
65.
ShrivastavaANagMK. Enhancing bone cancer diagnosis through image extraction and machine learning: a state-of-the-art approach. Surg Innov2023; 31: 58–70.
66.
NyanksonERodeneDGuptaRB. Advancements in crude oil spill remediation research after the deepwater horizon oil spill. Water Air Soil Pollut2016; 227: 1–22.
67.
PandeyJKKumarAPMisraM, et al.Recent advances in biodegradable nanocomposites. J Nanosci Nanotechnol2005; 5: 497–526.
68.
IborraADíazGLópezD, et al.Copolymer based on lauryl methacrylate and poly (ethylene glycol) methyl ether methacrylate as amphiphilic macrosurfactant: synthesis, characterization and their application as dispersing agent for carbon nanotubes. Eur Polym J2017; 87: 308–317.
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
