Sage Journals: Discover world-class research

Abstract

Multi-point thermoforming is a new flexible technique for manufacturing three-dimensional polymer sheet parts. The fixed die utilized in conventional thermoforming process is replaced by a multi-point die, which can be reconfigured rapidly and nearly cost-free. In the present study, the effects of the elastic conditions on the surface quality and shape accuracy of the formed workpiece have been investigated through experiments and numerical simulations. The results show that an elastic cushion with proper thickness and hardness can significantly improve the surface quality of the workpiece. It has also been found that the application of lubrication can improve the shape accuracy of the formed workpiece.

Keywords

Polymer multi-point forming thermoforming flexible forming elastic cushion

Get full access to this article

View all access options for this article.

References

Throne

. Technology of thermoforming, Cincinnati: Hanser Gardner Publications, 1996.

Li M, Nakamura K, Watanabe S, et al. Study of the basic principles (1st report: Research on Multi-point forming for sheet metal), 1992, pp.519–522 (in Japanese).

Liu

. Multi-point forming: a flexible manufacturing method for a 3-d surface sheet. J Mater Process Technol 1999; 87(1): 277–280.

Zhongyi

Mingzhe

. Optimum path forming technique for sheet metal and its realization in multi-point forming. J Mater Process Technol 2001; 110(2): 136–141.

Cai

Sui

. Multi-point forming technology for sheet metal. J Mater Process Technol 2002; 129(1): 333–338.

Tan

Cai

. Research on the process of multi-point forming for the customized titanium alloy cranial prosthesis. J Mater Process Technol 2007; 187–188: 453–457.

Sala

Di Landro

Cassago

. A numerical and experimental approach to optimise sheet stamping technologies: polymers thermoforming. Mater Design 2002; 23(1): 21–39.

Cai

Z-Y

Wang

S-H

M-Z

. Numerical investigation of multi-point forming process for sheet metal: wrinkling, dimpling and springback. Int J Adv Manuf Technol 2007; 37(9–10): 927–936.

Liu

. Optimization of cushion conditions in micro multi-point sheet forming. J Mater Process Technol 2012; 212(3): 672–677.

10.

Wang

Cai

. Numerical simulation on the local stress and local deformation in multi-point stretch forming process. Int J Adv Manuf Technol 2011; 60(9–12): 901–911.

11.

Duffo

Monasse

Haudin

. Rheology of polypropylene in the solid state. J Mater Sci 1995; 30(3): 701–711.

12.

G'sell

Jonas

. Determination of the plastic behaviour of solid polymers at constant true strain rate. J Mater Sci 1979; 14(3): 583–591.

13.

Mooney

. A theory of large elastic deformation. J Appl Phys 1940; 11(9): 582–592.

14.

Abaqus Analysis User's Manual 18.5.1. Hyperelastic behavior of rubberlike materials, pp.4–5.

Research on the elastic cushion conditions in multi-point thermoforming for polymer sheet

Abstract

Keywords

Get full access to this article

References