This paper presents a fully coupled transient thermomechanical analysis of a disc brake that takes into account the so-called ‘rotating-heat-source’ effect. Results from this are used to inform the time-based extraction of system eigenvalues that permit quantification of the squeal propensity of the brake. The model performance is validated against a series of dynamometer tests, based upon the SAE J2521 drag brake test schedule, in which the ability of the model to predict the fugitive nature of the squeal problem is confirmed. Finally, a parametric study is also presented that shows how the technique can be used to desensitise the squeal propensity to both material and geometric design changes.
CrollaDALangA. M. Brake noise and vibration – the state of the art. In: DowsonDTaylorCMGodetM (eds) Vehicle tribology, Tribology Series, vol. 18. Amsterdam: Elsevier, 1991, pp.165–174.
2.
MurakamiHTsunadaNKitamuraT. A study concerned with a mechanism of disc-brake squeal. SAE paper 841233, 1984.
3.
OuyangHMottersheadJ. E. Friction-induced parametric resonances in disc: effect of a negative friction–velocity relationship. J Sound Vibr1998; 209(2): 251–264.
NoubyMSrinivasanK. Simulation of the structural modifications of a disc brake system to reduce brake squeal. Proc IMechE Part D: J Automobile Engineering2011; 225(5): 653–672.
6.
LeeYSBrooksPCBartonDCCrollaDA. A study of disc brake squeal propensity using a parametric finite element model. In: IMechE conference on vehicle noise and vibration, London, UK, 12–13 May 1998, paper 98, pp.191–202. London: Professional Engineering Publishing Limited.
7.
LeeYS. Frictional interface dynamics of an automotive disc brake. PhD Thesis, School of Mechanical Engineering, The University of Leeds, Leeds, UK, 1998.
8.
BajerABelskyVZengLJ. Combining a nonlinear static analysis and complex eigenvalue extraction in brake squeal simulation. SAE paper 2003-0103349, 2003.
9.
KungSSteizerGBelskyVBajerA. Brake squeal analysis incorporating contact conditions and other nonlinear effects. SAE paper 2003-01-3342, 2003.
10.
LilesGD. Analysis of disc brake squeal using finite element methods. SAE paper 891150, 1989.
11.
Abu BakarAROuyangHJamesSLiL. Finite element analysis of wear and its effect on squeal generation. Proc IMechE Part D: J Automobile Engineering2008; 222(7): 1153–1165.
12.
ZhuBBartonDCBrooksPC. Effects of thermal deformations on the squeal propensity of a simple automotive disc brake system. SAE paper 2008-01-2532, 2008.
13.
LeeYSBrooksPCBartonDCCrollaDA. A predictive tool to evaluate disc brake squeal propensity. Part 3: parametric design study. Int J Veh Des2003; 31(3): 330–353.
14.
MatsushimaTIzuiKNishiwakiS. Optimal design considering robustness to reduce brake squeal in disc brake systems. In: 9th world congress on structural and multidisciplinary optimization, Shizuoka, Japan, 13–17 June 2011, paper 072_1. Daejon: ISSMO.
15.
OuyangHNackWVYuanYChenF. Numerical analysis of automotive disc brake squeal: a review. Int J Veh Noise Vibr2005; 1(3–4): 207–231.
16.
BrooksPCBartonDCCrollaDA. A new approach to disc brake judder using a thermo-mechanical finite element model. In: IMechE AUTOTECH’93, Birmingham, UK, 16–19 November 1993, paper C462/31. London: Institution of Mechanical Engineers.
ABAQUS version 6.5 manual. Providence, RI: Hibbit, Karlsson and Sorensen Inc., 2004.
26.
HassanMZ. Thermal deformation analysis of automotive disc brake squeal. PhD Thesis, School of Mechanical Engineering, The University of Leeds, Leeds, UK, 2009.
Heat transfer and thermal stress analysis using ABAQUS version 6.5, Training course lecture notes. Providence, RI: Hibbit, Karlsson and Sorensen Inc., 2004.
29.
KoetniyomS. Thermal stress analysis of automotive disc brake. PhD Thesis, School of Mechanical Engineering, The University of Leeds, Leeds, UK, 2000.
30.
McKinlayAJ. The phenomenon of vehicle park brake rollaway. PhD Thesis, School of Mechanical Engineering, The University of Leeds, Leeds, UK, 2007.
31.
DavisJR. ASM speciality handbook. Materials Park, OH: American Society for Metals, 1996.
32.
MottersheadJE. Vibration- and friction-induced instability in disks. Shock Vibr Dig1998; 30(1): 14–31.
33.
KesslerPO’ReillyOMRaphaelA-LZworskicM. On dissipation-induced destabilization and brake squeal: a perspective using structured pseudospectra. J Sound Vibr2007; 308(1–2): 1–11.
34.
NorthMR. Disc brake squeal. In: Braking of road vehicles, Loughborough, UK, 23–25 March 1976, pp.169–176. London: Mechanical Engineering Publications Limited.
35.
BrooksPCBartonDCCrollaDA. JREI brake research dynamometer. Project, EPSRC grant number GR/L85688/01, 2001.
36.
RipinZB. Analysis of disc brake squeal using the finite element method. PhD Thesis, School of Mechanical Engineering, The University of Leeds, Leeds, UK, 1995.
37.
LeeYSBrooksPCBartonDCCrollaDA. A predictive tool to evaluate disc brake squeal propensity. Part 2: system linearization and modal analysis. Int J Veh Des2003; 31(3): 308–329.
38.
SunH. Sensitivity study on brake cooling performance. SAE paper 2006-01-0694, 2006.
39.
GrieveDGBartonDCCrollaDABuckinghamJT. Design of a lightweight automotive brake disc using finite element and Taguchi methods. Proc IMechE Part D: J Automobile Engineering1998; 212(4): 245–254.
40.
Abu BakarAROuyangH. Interface contact pressure distribution by simulated structural modification. In: IMechE international conference on vehicle braking and chassis control, Leeds, UK, 7–9 July 2004, pp.123–132. London: Professional Engineering Publishing Limited.
