Cavitation is recognized as a phenomenon that can cause serious damage to a hydro turbine and can reduce its performance when operating at off-design point. This is an undesired phenomenon, which needs to be improved. In order to suppress the cavitation in the Francis turbine draft tube, a technology with grooved draft tube named J-Groove is introduced in the Francis turbine. The Francis turbine performance and the internal flow characteristic are investigated both with and without J-Groove installation by the experimental method and numerical simulation. Visualization was used to capture the cavitation rope in the Francis turbine draft tube to compare with the computational fluid dynamics analysis result. The results show that the turbine performance both with and without J-Groove installation is quite similar. Regardless of impact on performance of Francis turbine by J-Groove, it suppresses the cavitation vortex rope and pressure fluctuation in the Francis turbine draft tube efficiently.
International Hydropower Association. Hydropower Status Report 2017, London: International Hydropower Association, 2017.
2.
Gong RZ, Wang HG, Yao Y, et al. Numerical simulation of pressure fluctuation in 1000MW Francis turbine under small opening condition. In: IOP conference series: earth and environmental science, 2012, vol. 15, 062038.
3.
EscalerXEgusquizaEFarhatMet al.Detection of cavitation in hydraulic turbines. Mech Syst Signal Process2006; 20: 983–1007.
4.
NishiMLiuS. An outlook on the draft-tube-surge study. Int J Fluid Mach Syst2013; 6: 33–48.
5.
LuoXWJiBTsujimotoY. A review of cavitation in hydraulic machinery. J Hydrodyn Ser B2016; 28: 335–358.
6.
Papillon B, Sabourin M, Couston M, et al. Methods for air admission in hydroturbines. In: Proceedings of XXIst IAHR symposium on hydraulic machinery and systems, Lausanne, Switzerland, 2002.
7.
QianZDYangJDHuaiWX. Numerical simulation and analysis of pressure pulsation in Francis hydraulic turbine with air admission. J Hydrodyn Ser B2007; 18: 467–472.
8.
Huang R, An Y, Luo X, et al. Numerical simulation of pressure vibrations in a Francis turbine draft tube with air admission. In: Proceedings of the ASME 2014 4th joint US-European fluids engineering division summer, Chicago, IL, USA, 2014.
9.
Yu A, Luo XW and Ji B. Numerical simulation and analysis of the internal flow in a Francis turbine with air admission. In: IOP conference series: materials science and engineering, 2015, vol. 72, 042047.
10.
LiWFFengJJWuHet al.Numerical investigation of pressure fluctuation reducing in draft tube of francis turbines. Int J Fluid Mach Syst2015; 8: 202–208.
11.
Susan-Resiga R, Vu TC, Muntean S, et al. Jet control of the draft tube vortex rope in Francis turbines at partial discharge. In: 23rd IAHR symposium on hydraulic machinery and systems, Yokohama, Japan, 2006.
12.
Kirschner O, Schmidt H, Ruprecht A, et al. Experimental investigation of vortex control with an axial jet in the draft tube of a model pump-turbine. In: IOP conference series: materials science and engineering 2010, vol. 12, 012092.
13.
ForoutanHYavuzkurtS. Flow in the simplified draft tube of a francis turbine operating at partial load-part II: control of the vortex rope. J Appl Mech2014; 81: 061011–061011.
14.
Wang H, Ruprecht A, Gode E, et al. Analysis and control of the part load vortex rope in the draft tube of a pumpturbine. In: 6th IAHR meeting of the Working Group “Cavitation and Dynamic Problems in Hydraulic Machinery and System”, Slovenia, 2015.
15.
KurokawaJ. J-Groove technique for suppressing various anomalous flow phenomena in turbomachines. Int J Fluid Mach Syst2011; 4: 1–13.
16.
SahaSLKurokawaJMatsuiJet al.Suppression of performance curve instability of a mixed flow pump by use of J-Groove. J Fluids Eng2000; 122: 592–597.
17.
KurokawaJImaumuraHChoiYD. Effect of J-Groove on the suppression of swirl flow in a conical diffuser. J Fluids Eng2010; 132: 071101–071101.
18.
ChenZSinghPMChoiYD. Suppression of unsteady swirl flow in the draft tube of a Francis hydro turbine model using J-Groove. J Mech Sci Technol2017; 31: 5813–5820.
19.
ChoiYDKurokawaJImamuraH. Suppression of cavitation in inducers by J-Grooves. J Fluids Eng2007; 129: 15–22.
20.
ChenZSinghPMChoiYD. The effect of runner blade loading on the performance and internal flow of a Francis hydro turbine model. J Mech Sci Technol2016; 30: 1617–1623.
21.
ChenZSinghPMChoiYD. Francis turbine blade design on the basis of port area and loss analysis. Energies2016; 9: 164–164.
Zwart P, Gerber A and Belamri T. A two-phase flow model for predicting cavitation dynamics. In: ICMF 2004 international conference on multiphase flow, Japan, 2004.
24.
Coutier-DelgoshaOFortes-PatellaRReboudJL. Evaluation of the turbulence model influence on the numerical simulations of unsteady cavitation. J Fluids Eng2003; 125: 38–45.
25.
WeiHFuSWuQet al.Experimental and numerical research on cavitating flows around axisymmetric bodies. J Mech Sci Technol2014; 28: 4527–4537.
26.
ZuoZGLiuSHLiuDMet al.Numerical analysis of pressure fluctuations induced by interblade vortices in a model Francis turbine. J Hydrodyn Ser B2015; 27: 513–521.
27.
LiuJLiuSWuYet al.Numerical investigate of the hump characteristic of a pump-turbine based on an improved cavitation model. Comput Fluids2012; 68: 105–111.
