An analysis of the impact of draft tube modifications on the performance of a Kaplan turbine by means of computational fluid dynamics

Abstract

Due to the low electricity prices in central Europe, cost optimisations related to all parts of a new hydropower plant have become increasingly important. In case of a run-of-river hydropower plant using a vertical axis Kaplan turbine, one of the cost drivers are the excavation works. Thus, a decisive factor for the reduction of construction costs is the minimisation of the construction depth of the elbow-type draft tube. In course of the design phase of a new hydropower plant in Austria, an analysis of the impact of draft tube modifications on the performance of the Kaplan turbine was carried out by applying computational fluid dynamics. The net head of the turbine with a diameter of D = 3.15 m accounts for H_net = 9.00 m and the maximum discharge per unit is Q_max = 57.5 m³/s. After it was proven that there is a good agreement of the numerically calculated and experimentally measured turbine efficiency for the original turbine configuration, various draft tube designs were tested in order to find out their impact on the turbine efficiency and to analyse the sources of draft tube losses in detail. Finally, it was possible to find a new draft tube design representing a compromise of reduced construction costs and acceptable turbine efficiency.