A novel type of mechanical presses design driven by three servo motors in parallel is proposed to develop high stamping capacity based on the theory of generalized function sets, and then is improved to enhance its practicability in engineering practice. The inverse and forward kinematics analyses are conducted later. Based on the fuzzy probability theory, the computing method of fuzzy reliability of kinematic accuracy of slider is then obtained. Finally, with a set of optimized length parameters of the presses given, the fuzzy reliability is calculated, on the basis of which a typical deep-drawing process is simulated.
DuRGuoW. The design of a new metal forming press with controllable mechanism. J Mech Des2003; 125: 582–592.
8.
KongXGosselinCM. Type synthesis of 3-DOF PPR-equivalent parallel manipulators based on screw theory and the concept of virtual chain. J Mech Des2005; 127: 1113–1121.
9.
LiuXJWangJGAOF. Performance atlases of the workspace for planar 3-DOF parallel manipulators. Robotica2000; 18: 563–568.
10.
LiuXJTangXWangJ. HANA: A novel spatial parallel manipulator with one rotational and two translational degrees of freedom. Robotica2005; 23: 257–270.
11.
LiuXJWangJWuC. A new family of spatial 3-DOF parallel manipulators with two translational and one rotational DOFs. Robotica2008; 27: 241–247.
12.
EarlCF. Some kinematics structures for robot manipulator designs. J Mech Transm Autom Des1983; 105: 15–22.
13.
Herv´eJM. The Lie group of rigid body displacements, a fundamental tool for mechanism design. Mech Mach Theory1999; 34: 719–730.
14.
ChoiHBKonnoAUchiyamaM. Design, implementation, and performance evaluation of a 4-DOF parallel robot. Robotica2009; 28: 107–118.
15.
MengJLiuGLiZ. A geometric theory for analysis and synthesis of sub-6-DoF parallel manipulators. IEEE Trans Robot Autom2007; 23: 625–649.
16.
KongXGosselinCM. Type synthesis of 3T1R 4-DOF parallel manipulators based on screw theory. IEEE Trans Robot Autom2004; 20: 181–190.
17.
HuangZLiQC. General methodology for type synthesis of symmetrical lower-mobility parallel manipulators and several novel manipulators. Int J Robot Res2002; 21: 131–146.
18.
GoguG. Structural synthesis of maximally regular T3R2-type parallel robots via theory of linear transformations and evolutionary morphology. Robotica2009; 27: 79–101.
19.
YangTLLiuAXJinQ. Position and orientation characteristic equation for topological design of robot mechanisms. J. Mech. Des2009; 131021001.1-021001.17.
20.
GaoFLiWZhaoXianchaoa1. New kinematic structures for 2-, 3-, 4-, and 5-DOF parallel manipulator design. Mech Mach Theory2002; 37: 1395–l411.
21.
Gao F, Yang JL and Geffrey G. Type synthesis of parallel mechanisms having two rotations. In: ASME international design engineering technical conferences & computers and information in engineering conference, Quebec, Canada, 15–18 August 2010. New York: ASME.
22.
YuFGGaoFShiQS. Type synthesis for forging manipulators based on GF set. Chin J Mech Eng-EN2008; 44: 152–159.
23.
Bruyervitch. Reliability of mechanism , Shanghai: Shanghai Science and Technology Press, 1966, pp. 25–25.
24.
SandlerBZ. Probabilistic approach to mechanisms , New York: Elsevier, 1984, pp. 34–34.
25.
ZadehLA. Fuzzy sets. IJICIC1965; 8: 338–353.
26.
LiuPYWuMD. Fuzzy theory and its applications , Changsha: National University of Defence Technology Press, 1998, pp. 18–107.
27.
DongYG. Fuzzy reliability design of machine , Beijing: China Machine Press, 2000, pp. 15–15.
Gao F, Ma CX and Huang X, et al. A new type of mechanical presses driven by three servo motors in parallel. Patent CN102328448A, China, 2012.
30.
ZhangXCDongYHZhangLX. Kinematics modeling and simulation of a five-bar robot by using closed loop vector method. Chin IET Contr Theory A2006; 5: 16–18.
