In this study, a systematic method is proposed to synthesize the parallel and hybrid serial–parallel mechanisms for the forging manipulators based on the screw theory. First, several typical configurations of five-degrees-of-freedom parallel mechanism for the forging manipulators are synthesized, and they are all non-overconstrained mechanisms. Then, two kinds of hybrid serial–parallel mechanisms for the forging manipulators with the advantages of motion decoupling are constructed, which are also not overconstrained. The configurations obtained in this study would provide more type selection for the heavy-duty forging manipulators in engineering.
ErwinKWernerF. Gripper feed and gripper resilience cylinders on forging manipulators. Patent application US4420287, United States of America, 1983.
8.
SchubertP. Forging manipulator. Patent application US4796458, United States of America, 1989.
9.
WestermeyerW. Process and apparatus for operating a press unit. Patent application US5454262, United States of America, 1995.
10.
YanCYGaoFZhangY. Kinematic modeling of a serial-parallel forging manipulator with application to heavy-duty manipulations. Mech Based Des Struct Mach2010; 38: 105–129.
11.
YuFGGaoFShiQS. Type synthesis for forging manipulators based on GF set. Chin J Mech Eng2008; 44: 152–159.
12.
Yu FG, Gao F, Shi QS, et al. Structure synthesis for forging manipulators. In: Proceedings of the 7th world congress on intelligent control and automation, Chongqing, China, 25–27 June 2008, pp.400–403. Piscataway, NJ: IEEE.
13.
YangJLGaoFGeQJ. Type synthesis of parallel mechanisms having the first class GF sets and one-dimensional rotation. Robotica2011; 29(6): 895–902.
14.
BallRS. A treatise on the theory of screws. Cambridge: Cambridge University Press, 1900.
15.
DavidsonJKHuntKH. Robots and screw theory: applications of kinematics and statics to robotics. Oxford: Oxford University Press, 2004.
16.
HuangZLiQC. General methodology for type synthesis of symmetrical lower-mobility parallel manipulators and several novel manipulators. Int J Rob Res2002; 21(2): 131–145.
17.
HuangZLiQC. Type synthesis of symmetrical lower-mobility parallel mechanisms using the constraint-synthesis method. Int J Rob Res2003; 22(1): 59–79.
18.
KongXWGosselinCM. Type synthesis of parallel mechanisms. New York, NY: Springer, 2007.
19.
KongXWGosselinCM. Type synthesis of 4-DOF SP-equivalent parallel manipulators: a virtual chain approach. Mech Mach Theory2006; 41(11): 1306–1319.
20.
FangYFTsaiLW. Structure synthesis of a class of 4-DoF and 5-DoF parallel manipulators with identical limb structures. Int J Rob Res2002; 21: 799–810.
21.
FangHRFangYFGuoS. Structure synthesis of a class of 4-DoF parallel robot mechanisms based on screw theory. Chin J Mech Eng2004; 17(4): 486–489.
22.
ZhaoTSDaiJSHuangZ. Geometric analysis of overconstrained parallel manipulators with three and four degrees of freedom. J Soc Mech Eng Int J Ser C2002; 45(3): 730–740.
LuYHuB. A unified method to find active forces and passive wrench of some parallel manipulators with n SPS active legs and a passive leg. Proc Inst Mech Eng Part C J Mech Eng Sci2007; 221(4): 467–478.
25.
Meng J, Zhang DJ and Li ZX. Assembly problem of overconstrained and clearance-free parallel manipulators. In: Proceedings of the 2007 IEEE international conference on robotics and automation, Roma, Italy, 10–14 April 2007, pp.1183–1188. Piscataway, NJ: IEEE.
26.
ShuklaGWhitneyDE. The path method for analyzing mobility and constraint of mechanisms and assemblies. IEEE Trans Autom Sci Eng2005; 2: 184–192.
