This study evaluates the impact of cooling-assist friction stir welding (CA-FSW) tool rotational and traverse velocities on the bonding quality of Al-Cu-Mg and copper lap joints. A modified computational fluid dynamics (CFD) technique analyzes heat generation and distribution during dissimilar CA-FSW joints between AA6068 alloy and copper. The relationship between CA-FSW tool velocities and metallurgical properties of the final joint is assessed. Simulation results provide insights into metallurgical phenomena during the CA-FSW process. Findings reveal greater plastic deformation and heat generation on the AA6068 aluminum alloy side due to raw material placement, resulting in more significant microstructure changes in AA6068 aluminum alloy compared to copper. Increased heat generation leads to higher copper-rich intermetallic compound (IMC) formation, resulting in increased hardness of the stir zone at the base metals’ interface.
XuXZhangCDerazkolaHA, et al. UFSW tool pin profile effects on properties of aluminium-steel joint. Vacuum2021; 192: 110460.
2.
Aghajani DerazkolaHKhodabakhshiFGerlichAP. Friction-forging tubular additive manufacturing (FFTAM): a new route of solid-state layer-upon-layer metal deposition. J Mater Res Technol2020; 9: 15273–15285.
3.
KhodabakhshiFDerazkolaHAGerlichAP.Monte Carlo simulation of grain refinement during friction stir processing. J Mater Sci2020; 55: 13438–13456.
4.
TalebizadehsardariPMusharavatiFKhanA, et al. Underwater friction stir welding of Al-Mg alloy: thermo-mechanical modeling and validation. Mater Today Commun2021; 26: 101965.
5.
DerazkolaHAKhodabakhshiFGerlichAP.Fabrication of a nanostructured high strength steel tube by friction-forging tubular additive manufacturing (FFTAM) technology. J Manuf Process2020; 58: 724–735.
6.
ZhangZZhouHTanZ, et al. The simulation of microstructural evolutions in friction stir additive manufacturing. Proc IMechE, Part B: J Engineering Manufacture. Epub ahead of print 25July2023. DOI: 10.1177/09544054231188991.
7.
MemonSFydrychDFernandezAC, et al. Effects of FSW tool plunge depth on properties of an Al-Mg-Si alloy T-joint: thermomechanical modeling and experimental evaluation. Materials (Basel)2021; 14: 4754.
8.
SenDPalSKPandaSK.Effect of tool concavity on flash formation during fabrication of tubes through friction stir welding. Proc IMechE, Part B: J Engineering Manufacture. Epub ahead of print 23July2023. DOI: 10.1177/09544054231188992.
9.
QuartoMBocchiSD’UrsoG, et al. Multiresponse optimization of friction stir welding by an integrated ANN-PSO approach. Proc IMechE, Part B: J Engineering Manufacture2023; 237: 1858–1868.
10.
ThakurASharmaVBhadauriaSS.Investigation of metallurgical characterization and mechanical properties of double-sided friction stir welding of aluminum 6061 T6 alloy. Proc IMechE, Part B: J Engineering Manufacture2023; 237: 16–30.
11.
Aghajani DerazkolaHGarcíaEEyvazianA, et al. Effects of rapid cooling on properties of aluminum-steel friction stir welded joint. Materials (Basel)2021; 14: 908.
12.
LiXWZhangDTQiuC, et al. Microstructure and mechanical properties of dissimilar pure copper/1350 aluminum alloy butt joints by friction stir welding. Trans Nonferrous Met Soc China2012; 22: 1298–1306.
13.
Bakhtiari ArgesiFShamsipurAMirsalehiSE. Preparation of bimetallic nano-composite by dissimilar friction stir welding of copper to aluminum alloy. Trans Nonferrous Met Soc China2021; 31: 1363–1380.
14.
YouJZhaoYDongC, et al. Microstructural evolution and mechanical properties of the Al–Cu dissimilar joint enhanced by stationary-dynamic shoulder friction stir welding. J Mater Process Technol2022; 300: 117402.
15.
KhajehRJafarianHRSeyedeinSH, et al. Microstructure, mechanical and electrical properties of dissimilar friction stir welded 2024 aluminum alloy and copper joints. J Mater Res Technol2021; 14: 1945–1957.
16.
GotawalaNShrivastavaA.Analysis of material distribution in dissimilar friction stir welded joints of Al 1050 and copper. J Manuf Process2020; 57: 725–736.
17.
ZhaoYYouJQinJ, et al. Stationary shoulder friction stir welding of Al–Cu dissimilar materials and its mechanism for improving the microstructures and mechanical properties of joint. Mater Sci Eng A2022; 837: 142754.
18.
LiuPShiQWangW, et al. Microstructure and XRD analysis of FSW joints for copper T2/aluminium 5A06 dissimilar materials. Mater Lett2008; 62: 4106–4108.
19.
GalvãoILoureiroAVerderaD, et al. Influence of tool offsetting on the structure and morphology of dissimilar aluminum to copper friction-stir welds. Metallurgical Mater Trans A2012; 43: 5096–5105.
20.
XuePXiaoBLWangD, et al. Achieving high property friction stir welded aluminium/copper lap joint at low heat input. Sci Technol Weld Joining2011; 16: 657–661.
21.
SaeidTAbdollah-zadehASazgariB.Weldability and mechanical properties of dissimilar aluminum–copper lap joints made by friction stir welding. J Alloys Comp2010; 490: 652–655.
22.
SharmaAKGoyalDPablaBS, et al. Optimization of friction stir welding parameters for micro alloying of AA6082 alloy. Int J Interact Des Manuf. Epub ahead of print 14November2022. DOI: 10.1007/s12008-022-01105-7.
23.
TanCWJiangZGLiLQ, et al. Microstructural evolution and mechanical properties of dissimilar Al–Cu joints produced by friction stir welding. Mater Des2013; 51: 466–473.
24.
XuePXiaoBLNiDR, et al. Enhanced mechanical properties of friction stir welded dissimilar Al–Cu joint by intermetallic compounds. Mater Sci Eng A2010; 527: 5723–5727.
25.
MehtaKAstaritaACarloneP, et al. Investigation of exit-hole repairing on dissimilar aluminum-copper friction stir welded joints. J Mater Res Technol2021; 13: 2180–2193.
26.
MehtaKPCarlonePAstaritaA, et al. Conventional and cooling assisted friction stir welding of AA6061 and AZ31B alloys. Mater Sci Eng A2019; 759: 252–261.
27.
MehtaKPBadhekaVJ.Hybrid approaches of assisted heating and cooling for friction stir welding of copper to aluminum joints. J Mater Process Technol2017; 239: 336–345.
28.
PatelNPParlikarPSingh DhariR, et al. Numerical modelling on cooling assisted friction stir welding of dissimilar Al-Cu joint. J Manuf Process2019; 47: 98–109.
29.
MazaheriHAvalHJJamaatiR.Manufacturing of ultrafine-grained copper via rolling and cooling-assisted friction stir processing: effect of traverse speed. J Mater Eng Perform2023; 32: 3780–3795.
30.
BokovDOJawadMASuksatanW, et al. Effect of pin shape on thermal history of aluminum-steel friction stir welded joint: computational fluid dynamic modeling and validation. Materials (Basel)2021; 14: 7883.
31.
KhalafHIAl-SaburRAbdullahME, et al. Effects of underwater friction stir welding heat generation on residual stress of AA6068-T6 aluminum alloy. Materials (Basel)2022; 15: 2223.
32.
Aalami-AleaghaMEHadiBShahbaziMA.3-Dimensional numerical analysis of friction stir welding of copper and aluminum. J Mech Sci Technol2016; 30: 3767–3776.
33.
LiMZhangCWangD, et al. Friction stir spot welding of aluminum and copper: a review. Materials (Basel)2020; 13: 156.
34.
SunHZhouQZhuJ, et al. Analysis of the temperature field in Al-Cu dissimilar materials friction stir welding. J Mater Eng Perform2019; 28: 3115–3128.
35.
Aghajani DerazkolaHKordaniNAghajani DerazkolaH. Effects of friction stir welding tool tilt angle on properties of Al-Mg-Si alloy T-joint. CIRP J Manuf Sci Technol2021; 33: 264–276.
36.
Aghajani DerazkolaHGarciaEElyasiM. Underwater friction stir welding of PC: experimental study and thermo-mechanical modelling. J Manuf Process2021; 65: 161–173.
37.
KadianAKBiswasP.The study of material flow behaviour in dissimilar material FSW of AA6061 and Cu-B370 alloys plates. J Manuf Process2018; 34: 96–105.
38.
DerazkolaHAKhodabakhshiF.Underwater submerged dissimilar friction-stir welding of AA5083 aluminum alloy and A441 AISI steel. Int J Adv Manuf Technol2019; 102: 4383–4395.
39.
IordacheMNituEBadulescuC, et al. Evaluation of thermal distribution in friction stir welding on dissimilar materials (Cu-Al) using infrared thermography and numerical simulation. Adv Mater Res2016; 1138: 113–118.
40.
DerazkolaHAMohammadiAbokheiliRKordaniN, et al. Evaluation of nanocomposite structure printed by solid-state additive manufacturing. CIRP J Manuf Sci Technol2022; 37: 174–184.
41.
LiuXCLiWTZhouYQ, et al. Multiple effects of forced cooling on joint quality in coolant-assisted friction stir welding. J Mater Res Technol2023; 25: 4264–4276.
42.
ChenJLiZHanJ, et al. Investigation on microstructure evolution of Mg-Gd-Zn-Zr alloys during friction stir processing by liquid CO2 cooling assisted stop action. Mater Sci Eng A2023; 876: 145140.
43.
JoudakiJSafariMJoodakiM.Experimental investigation of friction stir spot welding of polymer-aluminum alloy weldments. Proc IMechE, Part B: J Engineering Manufacture2022; 236: 1368–1379.
44.
HuntJBPearlDHovanskiY, et al. Temperature-controlled friction stir welds of age-hardenable aluminum alloys characterized by positron annihilation lifetime spectroscopy. Proc IMechE, Part B: J Engineering Manufacture2023; 237: 1036–1047.
45.
ShiLDaiXTianC, et al. Effect of splat cooling on microstructures and mechanical properties of friction stir welded 2195 Al–Li alloy. Mater Sci Eng A2022; 858: 144169.
46.
XuNRenZKFanY, et al. Microstructural evolution and mechanical properties of cooling medium assistant friction stir processed AZ31B Mg alloy. Trans Nonferrous Met Soc China2023; 33: 1729–1741.
47.
Aghajani DerazkolaHSimchiA. Processing and characterizations of polycarbonate/alumina nanocomposites by additive powder fed friction stir processing. Thin-Walled Struct2020; 157: 107086.
48.
SahuSKMishraDPalK.A comparative study between weldability of polycarbonate and nylon-6 using different pin geometries in friction stir welding. Proc IMechE, Part B: J Engineering Manufacture2022; 236: 522–539.
49.
Fallahati NaqibiMElyasiMJamshidi AvalH, et al. Investigation of friction-stir welding parameters in the fabrication of a 2-Layer aluminum–Copper Pipe with monolithic interface. Trans Indian Inst Metals2021; 74: 285–300.
50.
DingTYanHChenJ, et al. Microstructure evolution and recrystallization mechanisms of high Mg alloyed Al-Mg alloy during friction stir welding with different cooling media. J Mater Eng Perform2023; 32: 3809–3820.
51.
IsaMSMMoghadasiKAriffinMA, et al. Recent research progress in friction stir welding of aluminium and copper dissimilar joint: a review. J Mater Res Technol2021; 15: 2735–2780.
