Friction stir welding (FSW) is a solid state welding process used to weld difficult to be welded or unweldable materials as aluminium alloys. In the last years, other materials have been successfully tested as magnesium, titanium and nickel based alloys. Dissimilar joints can be obtained by FSW, but issues arise concerning the correct choice of the process parameters. In the paper, the results of an experimental and numerical campaign aimed to produce dissimilar AZ31-AA6016-T6 butt joints are presented. The effect of sheet mutual position and main process parameters was investigated. It was found that intermetallics are the main cause of the poor quality of the joints. Sound joints can be produced only if the magnesium alloy is in the advancing side.
FratiniL., BuffaG. and ShivpuriR.: ‘Mechanical and metallurgical effects of in process cooling during friction stir welding of AA7075-T6 butt joints’, Acta Mater., 2010, 58, (6), 2056–2067.
2.
RajakumarS., BalasubramanianV. and RazalroseA.: ‘Friction stir and pulsed current gas metal arc welding of AZ61A magnesium alloy: a comparative study’, Mater. Des., 2013, 49, 267–278.
3.
PadmanabanG. and BalasubramanianV.: ‘An experimental investigation on friction stir welding of AZ31B magnesium alloy’, Int. J. Adv. Manuf. Technol., 2010, 49, (1–4), 111–121.
4.
AcerraF., BuffaG., FratiniL. and TroianoG.: ‘On the FSW of AA2024-T4 and AA7075-T6 T-joints: an industrial case study’, Int. J. Adv. Manuf. Technol., 2010, 48, (9–12), 1149–1157.
5.
CavaliereP., NobileR., PanellaF. W. and SquillaceA.: ‘Mechanical and microstructural behaviour of 2024-7075 aluminium alloy sheets joined by friction stir welding’, Int. J. Mach. Tools Manuf., 2006, 46, (6), 588–594.
6.
ChenY. C. and NakataK.: ‘Microstructural characterization and mechanical properties in friction stir welding of aluminum and titanium dissimilar alloys’, Mater. Des., 2009, 30, (3), 469–474.
7.
DresslerU., BiallasG. and Alfaro MercadoU.: ‘Friction stir welding of titanium alloy TiAl6V4 to aluminium alloy AA2024-T3’, Mater. Sci. Eng. A, 2009, 526, (1–2), 113–117.
8.
UzunH., Dalle DonneC., ArgagnottoA., GhidiniT. and GambaroC.: ‘Friction stir welding of dissimilar Al 6013-T4 To X5CrNi18-10 stainless steel’, Mater. Des., 2005, 26, (1), 41–46.
9.
Joseph FernandusM., SenthilkumarT., BalasubramanianV. and RajakumarS.: ‘Optimising diffusion bonding parameters to maximize the strength of AA6061 aluminium and AZ31B magnesium alloy joints’, Mater. Des., 2012, 33, (1), 31–41.
10.
LiuC., ChenD. L., BholeS., CaoX. and JahaziM.: ‘Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy’, Mater. Charact., 2009, 60, (5), 370–376.
11.
MalarvizhiS. and BalasubramanianV.: ‘Influences of tool shoulder diameter to plate thickness ratio (D/T) on stir zone formation and tensile properties of friction stir welded dissimilar joints of AA6061 aluminum-AZ31B magnesium alloys’, Mater. Des., 2012, 40, 453–460.
12.
SatoY. S., ParkS. H. C., MichiuchiM. and KokawaH.: ‘Constitutional liquation during dissimilar friction stir welding of Al and Mg alloys’, Scr. Mater., 2004, 50, (9), 1233–1236.
13.
SimonciniM. and ForcelleseA.: ‘Effect of the welding parameters and tool configuration on micro- and macro-mechanical properties of similar and dissimilar FSWed joints in AA5754 and AZ31 thin sheets’, Mater. Des., 2012, 41, 50–60.
14.
YanJ., XuZ., LiZ., LiL. and YangS.: ‘Microstructure characteristics and performance of dissimilar welds between magnesium alloy and aluminum formed by friction stirring’, Scr. Mater., 2005, 53, (5), 585–589.
15.
KostkaA., CoelhoR. S., dos SantosJ. and PyzallaA. R.: ‘Microstructure of friction stir welding of aluminium alloy to magnesium alloy’, Scr. Mater., 2009, 60, (11), 953–956.
16.
SomasekharanA. C. and MurrL. E.: ‘Characterization of complex, solid-state flow and mixing in the friction-stir welding (FSW) of aluminum alloy 6061-T6 to magnesium alloy AZ91D using color metallography’, J. Mater. Sci., 2006, 41, (16), 5365–5370.
17.
VenkateswaranP. and ReynoldsA. P.: ‘Factors affecting the properties of Friction Stir Welds between aluminum and magnesium alloys’, Mater. Sci. Eng. A, 2012, 545, 26–37.
18.
YashanD., TsangS., JohnsW. L. and DoughtyM. W.: ‘Inertia friction welding of 1100 aluminum to type 316 stainless steel’, Weld. J., 1987, 66, (8), 27–37.
19.
KwonY. J., ShigematsuI. and SaitoN.: ‘Dissimilar friction stir welding between magnesium and aluminum alloys’, Mater. Lett., 2008, 62, (23), 3827–3829.
20.
BuffaG., HuaJ., ShivpuriR. and FratiniL.: ‘A continuum based FEM model for friction stir welding – model development’, Mater. Sci. Eng. A, 2006, 419, (1–2), 389–396.
21.
BuffaG., HuaJ., ShivpuriR. and FratiniL.: ‘Design of the friction stir welding tool using the continuum based FEM model’, Mater. Sci. Eng. A, 2006, 419, (1–2), 381–388.
22.
BruniC., BuffaG., FratiniL. and SimonciniM.: ‘Friction stir welding of magnesium alloys under different process parameters’, Mater. Sci. Forum, 2010, 638–642, 3954–3959.
23.
BuffaG., ForcelleseA., FratiniL. and SimonciniM.: ‘Experimental and numerical analysis on FSWed magnesium alloy thin sheets obtained using “pin” and “pinless” tool’, Key Eng. Mater., 2012, 504–506, 747–752.
24.
FratiniL., BuffaG. and Lo MonacoL.: ‘Improved FE model for simulation of friction stir welding of different materials’, Sci. Technol. Weld. Join., 2010, 15, (3), 199–207.
25.
BuffaG.: ‘Numerical investigation on dissimilar friction stir welding of aluminum and magnesium sheets’, Metal Forming 15th Int. Conf. Accepted, Trans Tech Publications; 2014.
26.
BarcellonaA., BuffaG., FratiniL. and PalmeriD.: ‘On microstructural phenomena occurring in friction stir welding of aluminium alloys’, J. Mater. Process. Technol., 2006, 177, (1-3), 340–343.
27.
WatanabeT., TakayamaH. and YanagisawaA.: ‘Joining of aluminum alloy to steel by friction stir welding’, J. Mater. Process. Technol., 2006, 178, (1–3), 342–349.
28.
McKenzieP. W. J. and LapovokR.: ‘ECAP with back pressure for optimum strength and ductility in aluminium alloy 6016. Part 2: mechanical properties and texture’, Acta Mater., 2010, 58, (9), 3212–3222.
29.
LiuJ. W., ChenZ. H., ChenD. and LiG. F.: ‘Deformation mechanism and softening effect of extruded AZ31 magnesium alloy sheet at moderate temperatures’, Trans. Nonferrous Met. Soc. China, 2012, 22, (6), 1329–1335.
30.
BuffaG., FratiniL., HuaJ. and ShivpuriR.: ‘Friction stir welding of tailored blanks: investigation on process feasibility’, CIRP Ann., 2006, 55, (1), 279–282.
