Evaluation of thermo-mechanical,dielectric and corrosion resistant properties of cardanol benzoxazine-epoxy based hybrid composites: A very low temperature curing pre-polymer for high performance paint related applications
Restricted accessResearch articleFirst published online June, 2020
Evaluation of thermo-mechanical,dielectric and corrosion resistant properties of cardanol benzoxazine-epoxy based hybrid composites: A very low temperature curing pre-polymer for high performance paint related applications
In the present work, the hybrid siloxane-based cardanol-benzoxazine-epoxy (1:1 ratio) matrix (SBCBz-EP) capable of curing at substantially low temperature when compared with that of conventional benzoxazines was prepared and characterized. The matrix SBCBz-EP was reinforced with varying weight percentages (1, 3 and 5 wt%) of hydroxyl-terminated cyclotriphosphazene (HTCP) and the resulting hybrid composites were characterized by modern analytical methods, which can be used for paint-related applications due to their low-temperature curing behaviour. Data obtained from differential scanning calorimeter analysis infer that the glass transition temperature of the hybrid matrix (SBCBz-EP) and HTCP reinforced with 1, 3 and 5 wt% composites was 73°C, 75°C, 82°C, and 88°C, respectively. The polymerization temperature obtained for SBCBz-EP matrix and HTCP-reinforced hybrid composites was considerably lower than that of conventional benzoxazines. The present hybridization approach of benzoxazine and epoxy paves an avenue to alleviate the deficient characteristics of both industrially valuable resins namely high curing temperature and brittle behaviour of benzoxazines and also to improve thermal stability, mechanical strength and flame-retardant behaviour of epoxy resins. Data obtained from mechanical, dielectric, thermal stability and corrosion-resistant studies indicate that the properties of hybrid composites (HTCP/SBCBZ-EP) were enhanced to an appreciable extent according to the wt% of HTCP and it can be suggested that these hybrid composite materials can be used in the form of adhesives, sealants, encapsulants and water-resistant coatings for high performance industrial applications.
EmanuelaCMaffezzoliAMeleG, et al.Synthesis of a novel cardanol-based benzoxazine monomer and environmentally sustainable production of polymers and bio-composites. Green Chem2007; 9: 754–759.
2.
BimleshLVarmaIKBijweJ. Cardanol-based bisbenzoxazines effect of structure on thermal behavior. J Therm Anal Calorim2012; 107: 661–668.
3.
ShengfangLZouTFengL, et al.Preparation and properties of cardanol-based polybenzoxazine/SiO2 hybrids by sol-gel technique. J Appl Polym Sci2013; 128: 4164–4171.
4.
YusufYKiskanBGhoshNN. Recent advancement on polybenzoxazine—a newly developed high performance thermoset. J Polym Sci A2009; 47: 5565–5576.
5.
CamiloZLligadasGRondaJC, et al.Renewable polybenzoxazines based in diphenolic acid. Polymer2012; 53: 1617–1623.
6.
ChengxiZLuoXZhuR, et al.Thermal and dielectric properties of epoxy/DDS/CTBN adhesive modified by cardanol-based benzoxazine. J Adhes Sci Technol2015; 29: 767–777.
7.
ShengfangLYanSYuJ, et al.Synthesis and characterization of new benzoxazine-based phenolic resins from renewable resources and the properties of their polymers. J Appl Polym Sci2011; 122: 2843–2848.
8.
XinWZhouSGuoWW, et al.Renewable cardanol-based phosphate as a flame retardant toughening agent for epoxy resins. ACS Sustainable Chem Eng2017; 5: 3409–3416.
9.
BrindusaBRaicopolMMaljuschA, et al.Phenolated oleic acid based polybenzoxazine derivatives as corrosion protection layers. Chem Plus Chem2015; 80: 1170–1177.
10.
HajimeKMatsumotoAHasegawaK, et al.New thermosetting resin from bisphenol A-based benzoxazine and bisoxazoline. J Appl Polym Sci1999; 72: 1551–1558.
11.
SelvarajVJayanthiKPAlagarM. Synthesis and characterization of cardanol based fluorescent composite for optoelectronic and antimicrobial applications. Polymer2017; 108: 449–461.
12.
ClimieIJGHutsonandDHStoydinG.Metabolism of the epoxy resin component 2, Z-bis [4-(2, 3-epoxypropoxy) phenyl] propane, the diglycidyl ether of bisphenol A (DGEBPA) in the mouse. Part I. A comparison of the fate of a single dermal application and of a single oral dose of 14C-DGEBPA. Xenobiotica1981; 11: 391–399.
13.
Munguia-LopezEMSoto-ValdezH. Effect of heat processing and storage time on migration of bisphenol A (BPA) and bisphenol A-diglycidyl ether (BADGE) to aqueous food simulant from Mexican can coatings. J Agric Food Chem2001; 49: 3666–3671.
HuangZShiW. Synthesis and properties of a novel hyperbranched polyphosphate acrylate applied to UV curable flame retardant coatings. Eur Polym J2007; 43: 1302–1312.
19.
HuanLWangXWuD.Novel cyclotriphosphazene-based epoxy compound and its application in halogen-free epoxy thermosetting systems: Synthesis, curing behaviors, and flame retardancy. Polym Degrad Stabil2014; 103: 96–112.
20.
YaYFuJWangM, et al.Fabrication of poly(cyclotriphosphazene-co-4,4′-sulfonyldiphenol) nanotubes decorated with Ag–Au bimetallic nanoparticles with enhanced catalytic activity for the reduction of 4-nitrophenol. RSC Adv2016; 6: 24921–24928.
21.
SelvarajVJayanthiKPLakshmikandhanT, et al.Development of polybenzoxazine/TSBA-15 composite from renewable resource cardanol for low k applications. RSC Adv2015; 5: 48898–48907.
22.
FengFXiaobinHJiaweiH, et al.Preparation and properties of novel inherent flame-retardant cyclotriphosphazene-containing epoxy resins. J Macromol Sci B2010; 49: 1002–1011.
23.
KrishnamurthySSWoodsM. Nuclear magnetic resonance of cyclophosphazenes. Ann R NMR S1987; 19: 175–320.
24.
ZhouYHuangXTangX. Synthesis and characterization of novel thermoplastic poly(oligophosphazene-urethane)s. Polym Int2009; 58: 710–714.
25.
SelviMDevarajuSSethuramanK, et al.Cyclotriphosphazene fibre reinforced poly(benzoxazine-co-ε-caprolactam) nanocomposites for flame retardant applications. Chinese J Polym Sci2014; 32: 1086–1098.
26.
SethuramanKAlagarM. Thermo-mechanical and dielectric properties of graphene reinforced caprolactamcardanol based benzoxazine–epoxy nanocomposites. RSC Adv2015; 5: 9607–9617.
27.
SuqingLZhaoJZhangZ, et al.Synthesis and characterization of aliphatic segmented poly(ether amide urethane)s through a non-isocyanate route. RSC Adv2014; 4: 23720–23729.
28.
LudovicDBonnaudLOlivierM, et al.Arbutin-based benzoxazine: en route to an intrinsic water soluble biobased resin. Green Chem2016; 18: 4954–4960.
29.
SangHJHwangTHTalapaneniSN, et al.Rational sulfur cathode design for lithium−sulfur batteries: sulfur-embedded benzoxazine polymers. ACS Energy Lett2016; 1: 566–572.
30.
ShuilaiQLiSTaoY, et al.Preparation of UV-curable functionalized phosphazene-containing nanotube/polyurethane acrylate nanocomposite coatings with enhanced thermal and mechanical properties. RSC Adv2015; 5: 73775–73782.
31.
KeivanMBakhtiariGOAhmadiM. Preparation and characterization of MWCNT-TEPA/polyurethane nanocomposite membranes for CO2/CH4 separation: experimental and modeling. Chem Eng Res Des2018; 13: 222–234.
32.
SiwonKMylesTDKunzHR. The effect of binder content on the performance of a high temperature polymer electrolyte membrane fuel cell produced with reactive spray deposition technology. Electrochim Acta2015; 177: 190–200.
33.
MustaphaGBachiriAHegaziSE, et al.Thermal degradation of a reactive flame retardant based on cyclotriphosphazene and its blend with DGEBA epoxy resin. Polym Degrad Stabil2009; 94: 2101–2106.
34.
DeepakMPPhalakGAMhaskeST. Enhancement of anti-corrosive performances of cardanol based amine functional benzoxazine resin by copolymerizing with epoxy resins. Prog Org Coat2017; 105: 18–28.
35.
JanvierMHollandeLJaufurallyAS, et al.Syringaresinol: a renewable and safer alternative to bisphenol A for epoxy-amine resins. ChemSusChem. 2017; 10: 738–746.
36.
JinyueDYangSTenN, et al.Synthesis of eugenol-based silicon-containing benzoxazines and their applications as bio-based organic coatings. Coatings2018; 8: 88–101.
37.
RaoBSPalanisamyA.Synthesis of bio based low temperature curable liquid epoxy, benzoxazine monomer system from cardanol: thermal and viscoelastic properties. Eur Polym J2013; 49: 2365–2376.
38.
RiessGSchwobJMGuthG, et al.Ring opening polymerization of benzoxazines — a new route to phenolic resins. Adv Poly Synthesis1985; 31: 27–49.
39.
HariharanASrinivasanKMurthyC, et al.Cardanol based benzoxazine blends and bio-silica reinforced composites: thermal and dielectric properties. New J Chem2018; 42: 4067–4080.
40.
DelollisNJMontoyaO. Mode of failure in structural adhesive bonds. J Appl Polym Sci1967; 11: 983–989.
41.
KrishnadeviKGraceANAlagarM, et al.Development of hexa (aminophenyl)cyclotriphosphazene modified cyanate ester composites for high-temperature applications. High Perform Polym2014; 26: 89–96.
42.
AbdulQDXuYLZegaouiA, et al.Reinforcement of waste hemp fibres in aromatic diamine-based benzoxazine thermosets for the enhancement of mechanical and thermomechanical properties. Plast Rub Compos2017; 46: 442–449.
43.
MasanoriNIshidaH. Synthesis and properties of new crosslinkable telechelics with benzoxazine moiety at the chain end. Polymer2009; 50: 2688–2695.
44.
SamuelERJacksonNESavagatrupS, et al.Modelling the morphology and thermomechanical behaviour of low-bandgap conjugated polymers and bulk heterojunction films. Energy Environ Sci2017; 10: 558–569.
45.
GuangwuZWangFDaiJ, et al.Effect of functionalization of graphene nanoplatelets on the mechanical and thermal properties of silicone rubber composites. Materials2016; 9: 92–104.
46.
YuanLDaiJLiuX, et al.Bio-Based epoxy resins derived from eugenol with low dielectric constant. J Electron Packag2017; 139: 1–7.
47.
CongPLiJLiZ, et al.Synthesis of SiO2/epoxy–benzoxazine ternary copolymer via sol–gel method: thermal and mechanical behavior. Mater Design2016; 111: 453–462.
48.
YiqunWKouKZhaoW, et al.The effect of functionalized benzoxazine with allyl groups on the dielectric, mechanical and thermal properties of BMI/BADCy composites. RSC Adv2015; 5: 99313–99321.
49.
SoumyajyotiCShanmuganathanKKumaraswamyG. Fire retardant, self-extinguishing inorganic polymer composite memory foams. ACS Appl Mater Interfaces2017; 9: 44864–44872.
50.
QianWZhangQZhaoL, et al.A novel and facile strategy for highly flame retardant polymer foam composite materials: transforming silicone resin coating into silica self extinguishing layer. J Hazard Mater2017; 15: 222–231.
51.
JiaLTangJWangX, et al.Synthesis, characterization and curing properties of a novel cyclolinear phosphazene-based epoxy resin for halogen-free flame retardancy and high performance. RSC Adv2012; 2: 5789–5799.
52.
ShuliangLZhaoCGouH, et al.Synthesis and characterization of aniline-dimer-based electroactive benzoxazine and its polymer. RSC Adv2017; 7: 55796–55806.
53.
ShuliangLZhaoCGouH, et al.Advanced anticorrosion coatings prepared from polybenzoxazine/α-zirconium phosphate nanocomposites. Int J Electrochem Sci2018; 13: 2661–2675.
54.
ChangluZLuXXinZ, et al.Hydrophobic benzoxazine-cured epoxy coatings for corrosion protection. Prog Org Coat2013; 76: 1178–1183.
55.
XinLLiuYZhouC, et al.Corrosion protection of hydrophobic bisphenol A based polybenzoxazine coatings on mild steel. RSC Adv2016; 6: 5805–5811.
56.
Tsai-WeiCLiuYL. Furan-functionalized aniline trimer based self-healing polymers exhibiting high efficiency of anticorrosion. Polymer2017; 125: 227–233.
