Two kinds of thermoplastic polyimides (PIs) were synthesized via a two-step method with 2,2-bis[4-(4-aminophenoxy)phenyl]propane (BAPP), 4,4′-oxydianiline (ODA) diamine, and 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA), and their thermal degradation kinetics was studied by thermogravimetric analysis at different heating rates under nitrogen. Derivative thermogravimetric analysis curves indicated a simple, single-stage degradation process in PI BTDA-BAPP and a two-stage degradation process in PI BTDA-ODA-BAPP. The activation energies (Eas) of the thermal degradation reaction were determined by the Flynn–Wall–Ozawa and Kissinger–Akahira–Sunose methods without a knowledge of the kinetic reaction mechanism. By comparing the values of Ea and weight loss temperatures, it was demonstrated that the thermal stability of PI BTDA-ODA-BAPP was superior to that of PI BTDA-BAPP.
ZhangQHLuoWQGaoLX. Thermal mechanical and dynamic mechanical property of biphenyl polyimide fibers. J Appl Polym Sci2004; 92: 1653–1657.
3.
SaeedMBZhanMS. Effects of monomer structure and imidization degree on mechanical properties and viscoelastic behavior of thermoplastic polyimide films. J Eur Polym J2006; 42: 1844–1854.
4.
XuYZhaoAWangX. Influence of curing accelerators on the imidization of polyamic acids and properties of polyimide films. J Wuhan Univ Technol Mater Sci Ed2016; 31: 1137–1143.
5.
SaeedMBZhanMS. Adhesive strength of partially imidized thermoplastic polyimide films in bonded joints. J Int J Adhes Adhes2007; 27: 9–19.
6.
NohBIYoonJWChoiJH. Effect of thermal treatment on adhesion strength of Cu/Ni–Cr/polyimide flexible copper clad laminate fabricated by roll-to-roll process. J Microelectronic Eng2011; 88: 718–723.
7.
HwangSMJun-HyungLIMChang-MinLEE. Fabrication of two-layer flexible copper clad laminate by electroless-Cu plating on surface modified polyimide. J Trans Nonferrous Metals Soc China2009; 19: 970–974.
8.
KohikiMNakashimaKMichishitaN. Two-layered copper-clad laminate. Patent application 12/516,618, USA, 2007.
9.
LuCSKingJSShihSS. Thermoplastic polyimide composition and double-sided flexible copper clad laminate using the same. Patent application 11/511,314, USA, 2006.
10.
SongGWangDZhaoX. Synthesis and properties of polyimides-containing benzoxazole units in the main chain. J High Perform Polym2013; 25: 354–360.
11.
VarganiciCDRosuDBarbu-MicC. On the thermal stability of some aromatic-aliphatic polyimides. J Anal Appl Pyrolysis2015; 113: 390–401.
12.
Bin AhmadMGharayebiYSalitM S. Preparation, characterization and thermal degradation of polyimide (4-APS/BTDA)/SiO2 composite films. J Int J Mol Sci2012; 13: 4860–4872.
13.
LuaACSuJ. Isothermal and non-isothermal pyrolysis kinetics of Kapton® polyimide. J Polym Degrad Stab2006; 91: 144–153.
14.
KrishnanPSGVoraRHChungTS. Synthesis, characterization and kinetic study of hydrolysis of polyamic acid derived from ODPA and m-tolidine and related compounds. J Polym2001; 42: 5165–5174.
15.
QiaoXChungTSPramodaKP. Fabrication and characterization of BTDA-TDI/MDI (P84) co-polyimide membranes for the pervaporation dehydration of isopropanol. J Membr sci2005; 264: 176–189.
16.
ChaoDZhangJLiuX. Synthesis of novel poly (amic acid) and polyimide with oligoaniline in the main chain and their thermal, electrochemical, and dielectric properties. J Polym2010; 51: 4518–4524.
Tarrio-SaavedraJLópez-BeceiroJNayaS. Effect of silica content on thermal stability of fumed silica/epoxy composites. J Polym Degrad Stab2008; 93: 2133–2137.
19.
VyazovkinSSbirrazzuoliN. Isoconversional kinetic analysis of thermally stimulated processes in polymers. J Macromol Rapid Commun2006; 27: 1515–1532.
20.
BadiaJDSantonja-BlascoLMorianaR. Thermal analysis applied to the characterization of degradation in soil of polylactide: II. On the thermal stability and thermal decomposition kinetics. J Polym Degrad Stab2010; 95: 2192–2199.
21.
RafiqSManZMaitraS. Kinetics of thermal degradation of polysulfone/polyimide blended polymeric membranes. J Appl Polym Sci2012; 123: 3755–3763.
22.
PeterHondred. Degradation kinetics of polyimide film. J High Perform Polym2011; 23: 335–342.
23.
CriadoJPérez-MaquedaLGotorF. A unified theory for the kinetic analysis of solid state reactions under any thermal pathway. J Therm Anal Calorim2003; 72: 901–906.
