Effect of Variables on the Mechanical Properties and Maximization of Polyethylene—Aspen Composites by Statistical Experimental Design

Abstract

Systemic studies of the effects of the concentrations of maleated polyethylene (MAPE) loading, the content and addition sequence of dicumyl peroxide, the content and type of nanoclay (NC), and aspen fiber loading on the mechanical properties of PE—aspen composites were undertaken with the objective to increase the impact strength as well as the tensile properties. In this article, the formation of an optimal compatibilizing system for the hybrid composite PE—aspen—NC by combining basic principles for compatibilization was investigated. Statistical approach experimentation using Statgraphics Centurion^® with the objective to maximize both the tensile strength as well as the impact properties of natural fiber and nanoclay filled PE was applied to reach values well above that of virgin PE.

Keywords

wood fiber aspen fiber PE composite central composite design nanoclay.

References

Singh, S. and Mohanty, A.K. ( 2007). Wood Fiber Reinforced Bacterial Bioplastic Composites: Fabrication and Performance Evaluation, Composites Science and Technology, 67(9): 1753-1763.

Selke, S.E. and Wichman, I. ( 2004). Wood Fiber/Polyolefin Composites, Composites Part A: Applied Science and Manufacturing, 35(3): 321-326.

Lei, Y. , Wu, Q. , Yao, F. and Xu, Y. ( 2007). Preparation and Properties of Recycled HDPE/Natural Fiber Composites, Composites Part A: Applied Science and Manufacturing , 38(7): 1664-1674.

Keener, T.J. , Stuart, R.K. and Brown, T.K. (2004). Maleated Coupling Agents for Natural Fibre Composites, Composites Part A: Applied Science and Manufacturing, 35(3): 357-362.

Mohanty, S. , Verma, S.K. and Najak, S.K. ( 2006). Dynamic Mechanical and Thermal Properties of MAPE Treated Jute/HDPE Composites, Composites Science and Technology, 66(3-4): 538-547.

Krupa, I. and Luyt, A.S. ( 2002). Mechanical Properties of Uncrosslinked and Crosslinked Linear Low-Density Polyethylene/Wax Blends, Journal of Applied Polymer Science, 83: 2505-2521.

Gaboyard, M. , Robin, J.-J. , Hervaud, Y. and Boutevin, B. (2002). Free-Radical Graft Copolymerization of Phosphonated Methacrylates onto Low-Density Polyethylene, Journal of Applied Polymer Science, 86: 2011-2020.

Kim, T.-H. , Kim, H.-K. , Oh, D.R. , Lee, M.S. , Chae, K.H. and Kaang, S. (2000). Melt Free-Radical Grafting of Hindered Phenol Antioxidant onto Polyethylene, Journal of Applied Polymer Science, 77(13): 2968-2973.

Isac, S.K. and George, K.E. ( 2001). Reactive Processing of Polyethylenes on a Single Screw Extruder, Journal of Applied Polymer Science, 81: 2545-2549.

10.

Rozman, H.D. , Lai, C.Y. , Ismail, H. and Ishak, Z.A.Mohd. (2000). The Effect of Coupling Agents on the Mechanical and Physical Properties of Oil Palm Empty Fruit Bunch-propylene Composites, Polymer International, 49(11): 1273-1278.

11.

Chen, L. , Wong, S.-C. and Pisharath, S. ( 2003). Fracture Properties of Nanoclay-Filled Polypropylene , Journal of Applied Polymer Science, 88: 3298-3305.

12.

Sen, A.K. , Mukherjee, B. , Bhattacharyya, A.S. , De, P.P. and Bhowmick, A.K. (1991). Functionalization of Polyethylene and Ethylene Propylene Diene Terpolymer in the Bulk Through Dibutyl Maleate Grafting, Angewandte Makromolekulare Chemie, 191(1): 15-30.

13.

Pesetskiia, S.S. , Jurkowski, B. , Krivoguz, Y.M. and Kelar, K. (2001). Free-radical Grafting of Itaconic Acid onto LDPE by Reactive Extrusion I. Effect of Initiator Solubility, Polymer, 42(2): 469-475.

14.

Zakoshansky, V.M. (1992). Method for the Decomposition of Cumene Hydroperoxide by Acidic Catalyst to Phenol and Acetone, United States Patent 5254751.

15.

Yamazaki, T. and Seguchi, T. ( 2000). ESR Study on Chemical Crosslinking Reaction Mechanisms of Polyethylene Using a Chemical Agent. IV. Effect of Sulfur- and Phosphorous-Type Antioxidants, Journal of Polymer Science Par A: Polymer Chemistry , 38: 3092-3099.

16.

Lei, Y. , Wu, Q. , Clemons, C.M. , Yao, F. and Xu, Y. ( 2007). Influence of Nanoclay on Properties of HDPE/Wood Composites , Journal of Applied Polymer Science, 106(6): 3958-3966.

17.

Tanniru, M. , Yuan, Q. and Misra, R.D.K. ( 2006). On Significant Retention of Impact Strength in Clay-reinforced High-density Polyethylene (HDPE) Nanocomposites, Polymer, 47(6): 2133-2146.

18.

Zhai, H. , Xu, W. , Guo, H. , Zhou, Z. , Shen, S. and Song, Q. ( 2004). Preparation and Characterization of PE and PE-g-MAH/Montmorillonite Nanocomposites, European Polymer Journal, 40(11): 2539-2545.

19.

Gopakumar, T.G. , Lee, J.A. , Kontopoulour , M. and Parent, J.S. (2002). Influence of Clay Exfoliation on the Physical Properties of Montmorillonite/Polyethylene Composites, Polymer, 43(20): 5483-5491.

20.

Zhang, F. , Endo, T. , Qiu, W. , Yang, L. and Hirotsu, T. ( 2002). Preparation and Mechanical Properties of Composite of Fibrous Cellulose and Maleated Polyethylene, Journal of Applied Polymer Science, 84(11): 1971-1980.

21.

Sameni, J.K. , Ahmad, S.H. and Zakaria, S. (2004). Effect of MAPE on the Mechanical Properties of Rubber Wood Fiber/Thermoplastic Natural Rubber Composites , Advance in Polymer Technology, 23(1): 18-23.

22.

Raj, R.G. , Kokta, B.V. and Daneault, C. (1989). Effect of Chemical Treatment of Fibers on the Mechanical Properties of Polyethylene-Wood Fiber Composites , Journal Adhesion Science and Technology, 3(1): 55-64.

23.

Bledzki, A.K. and Gassan, J. (1999). Composites Reinforced with Cellulose Based Fibres, Progress in Polymer Science, 24: 221-274.

24.

Klason, C. , Kubat, J. and Strömvall, H.-E. ( 1984). The Efficiency of Cellulosic Fillers in Common Thermoplastics. Part 1. Filling without Processing Aids or Coupling Agents , International Journal of Polymeric Materials, 10(3): 159-187.

25.

Woodhams, R.T. , Thomas, G. and Rodgers, D.K. (1984). Wood Fibers as Reinforcing Fillers for Polyolefins, Polymer Engineering and Science, 24(15): 1166-1171.

26.

Lu, J.Z. , Negulescu, I.I. and Wu, Q. (2005). Maleated Wood-fiber/High-density-polyethylene Composites: Coupling Mechanisms and Interfacial Characterization, Composite Interfaces, 12(1-2): 125-140.

27.

Anderson, K.S. , Lim, S.H. and Hillmyer, M.A. (2003). Toughening of Polylactide by Melt Blending with Linear Low-density Polyethylene, Journal of Applied Polymer Science, 89(14): 3757-3768.

28.

Rana, A.K. , Mandal, A. , Mitra, B.C. , Jacobson, R. , Rowell, R. and Banerjee, A.N. ( 1998). Short Jute Fiber-reinforced Polypropylene Composites: Effect of Compatibilizer, Journal of Applied polymer Science , 69(2): 329-338.

29.

Sanadi, A.R. , Caufield, D.F. , Jacobson, R.E. and Rowell, R.M. (1995). Renewable Agricultural Fibres as Reinforcing Fillers in Plastics: Mechanical Properties of Kenaf Fibre-polypropylene Composites, Industrial & Engineering Chemistry Research, 34(5): 1889-1896.

30.

Hsueh, C.-H. (1989). Analytical Analyses of Stress Transfer in Fibre-reinforced Composites with Bonded and Debonded Fibre Ends, Journal of Materials Science, 24: 4475-4482.

31.

Yang, H.-S. , Wolcott, M.P. , Kim, H.-S. , Kim, S. and Kim, H.-J. (2007). Effect of Different Compatibilizing Agents on the Mechanical Properties of Lignocellulosic Materials Filled Polyethylene Bio-composites, Composite Structures, 79(3): 369-375.

32.

Mengeloglu, F. and Kabakci, A. (2008). Determination of Thermal Properties and Morphology of Eucalyptus Wood Residue Filled High Density Polyethylene Composites, International Journal of Molecular Sciences, 9: 107-119.

33.

Li, Q. and Matuana, L.M. ( 2003). Effectiveness of Maleated and Acrylic Acid-Functionalized Polyolefin Coupling Agents for HDPE-Wood-Flour Composites, Journal of Thermoplastic Composite Materials, 16(6): 551-564.

34.

Wang, Y. , Yeh, F.-C. , Lai, S.-M. , Chan, H.-C. and Shen, H.-F. ( 2004). Effectiveness of Functionalized Polyolefins as Compatibilizers for Polyethylene/Wood Flour Composites, Polymer Engineering and Science, 43(4): 933-945.

35.

Lai, S.-M. , Yeh, F.-C. , Wang, Y. , Chan, H.-C. and Shen, H.-F. (2002). Comparative Study of Maleated Polyolefins as Compatibilizers for Polyethylene/Wood Flour Composites , Journal of Applied Polymer Science, 87(3): 487-496.

36.

Southern Clay Products-Nanoclay (2007). Available at: http://www.nanoclay.com/selection_chart.asp (accessed November 19, 2007).

37.

Maiti, M. and Bhowmick, A.K. ( 2006). Structure and Properties of Some Novel Fluoroelastomer/Clay Nanocomposites with Special Reference to their Interaction, Journal of Polymer Science: Part B: Polymer Physics, 44(1): 162-176.